Move u-boot specific common nodes in the dts files to meson-gx-u-boot.dtsi. This allows us to keep the basic dts[i] files up-to-date with the ones in kernel, but at the same time allowing the u-boot to add its own properties to the existing nodes. Also add missing mmc alias to dts nodes to avoid below debug warning.
mmc_bind: alias ret=-2, devnum=-1 mmc_bind: alias ret=-2, devnum=-1
Signed-off-by: Anand Moon linux.amoon@gmail.com --- New patch in this series --- arch/arm/dts/meson-gx-u-boot.dtsi | 15 +++++++++++++++ arch/arm/dts/meson-gxbb-nanopi-k2.dts | 9 --------- arch/arm/dts/meson-gxbb-odroidc2.dts | 9 --------- arch/arm/dts/meson-gxbb-p20x.dtsi | 9 --------- arch/arm/dts/meson-gxl-s805x-libretech-ac.dts | 10 ---------- arch/arm/dts/meson-gxl-s905x-khadas-vim.dts | 5 ----- arch/arm/dts/meson-gxl-s905x-libretech-cc.dts | 9 --------- arch/arm/dts/meson-gxl-s905x-p212.dtsi | 10 ---------- arch/arm/dts/meson-gxm-khadas-vim2.dts | 10 ---------- 9 files changed, 15 insertions(+), 71 deletions(-)
diff --git a/arch/arm/dts/meson-gx-u-boot.dtsi b/arch/arm/dts/meson-gx-u-boot.dtsi index b84e5edba4..13be3a7b8f 100644 --- a/arch/arm/dts/meson-gx-u-boot.dtsi +++ b/arch/arm/dts/meson-gx-u-boot.dtsi @@ -8,6 +8,21 @@ soc { u-boot,dm-pre-reloc; }; + + aliases { + serial0 = &uart_AO; + serial1 = &uart_A; + serial2 = &uart_AO_B; + ethernet0 = ðmac; + spi0 = &spifc; + mmc0 = &sd_emmc_a; + mmc1 = &sd_emmc_b; + mmc2 = &sd_emmc_c; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; };
&vpu { diff --git a/arch/arm/dts/meson-gxbb-nanopi-k2.dts b/arch/arm/dts/meson-gxbb-nanopi-k2.dts index cbe99bd4e0..11690d6c46 100644 --- a/arch/arm/dts/meson-gxbb-nanopi-k2.dts +++ b/arch/arm/dts/meson-gxbb-nanopi-k2.dts @@ -11,15 +11,6 @@ / { compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
- aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts b/arch/arm/dts/meson-gxbb-odroidc2.dts index 54954b314a..f8cd76a2ef 100644 --- a/arch/arm/dts/meson-gxbb-odroidc2.dts +++ b/arch/arm/dts/meson-gxbb-odroidc2.dts @@ -14,15 +14,6 @@ compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb"; model = "Hardkernel ODROID-C2";
- aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; diff --git a/arch/arm/dts/meson-gxbb-p20x.dtsi b/arch/arm/dts/meson-gxbb-p20x.dtsi index 0be0f2a5d2..c9822e50f9 100644 --- a/arch/arm/dts/meson-gxbb-p20x.dtsi +++ b/arch/arm/dts/meson-gxbb-p20x.dtsi @@ -8,15 +8,6 @@ #include "meson-gxbb.dtsi"
/ { - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; diff --git a/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts b/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts index 82b1c48511..4f9072a83e 100644 --- a/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts +++ b/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts @@ -16,16 +16,6 @@ "amlogic,meson-gxl"; model = "Libre Computer Board AML-S805X-AC";
- aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - spi0 = &spifc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - cvbs-connector { /* * The pads are present but no connector is soldered on diff --git a/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts b/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts index ceb34afe42..072e4575d2 100644 --- a/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts @@ -26,11 +26,6 @@ }; };
- aliases { - serial2 = &uart_AO_B; - ethernet0 = ðmac; - }; - gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; diff --git a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts index a23252efc6..8d3965ab42 100644 --- a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts @@ -15,15 +15,6 @@ compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; model = "Libre Computer Board AML-S905X-CC";
- aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - cvbs-connector { compatible = "composite-video-connector";
diff --git a/arch/arm/dts/meson-gxl-s905x-p212.dtsi b/arch/arm/dts/meson-gxl-s905x-p212.dtsi index a1b31013ab..70f437fc3a 100644 --- a/arch/arm/dts/meson-gxl-s905x-p212.dtsi +++ b/arch/arm/dts/meson-gxl-s905x-p212.dtsi @@ -13,16 +13,6 @@ #include "meson-gxl-s905x.dtsi"
/ { - aliases { - serial0 = &uart_AO; - serial1 = &uart_A; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; diff --git a/arch/arm/dts/meson-gxm-khadas-vim2.dts b/arch/arm/dts/meson-gxm-khadas-vim2.dts index 782e9edac8..4e68e289d3 100644 --- a/arch/arm/dts/meson-gxm-khadas-vim2.dts +++ b/arch/arm/dts/meson-gxm-khadas-vim2.dts @@ -16,16 +16,6 @@ compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm"; model = "Khadas VIM2";
- aliases { - serial0 = &uart_AO; - serial1 = &uart_A; - serial2 = &uart_AO_B; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>;