Hi,
On 6/1/22 18:33, Patrick Delaunay wrote:
Depending on backup register value, U-Boot SPL maintains the debug unit powered-on for debugging purpose; only BUCK1 is required for powering the debug unit, so revert the setting for all the other power lanes, except BUCK3 that has to be always on.
To be functional this patch requires a modification in the debugger ,openocd for example, to update the STM32MP15 backup register when it is required to debug SPL after reset. After deeper analysis this behavior will be never supported in tools so the associated code, will be never used and the associated code can be removed.
Signed-off-by: Patrick Delaunay patrick.delaunay@foss.st.com
arch/arm/mach-stm32mp/include/mach/stm32.h | 1 - board/st/common/stpmic1.c | 14 -------------- include/power/stpmic1.h | 3 --- 3 files changed, 18 deletions(-)
Applied to u-boot-stm/next, thanks!
Regards Patrick