[PATCH v2 0/7] Add Starfive JH7110 Cadence USB driver

4 Jul 2024


      Add Starfive JH7110 Cadence USB driver and related PHY driver.
So the codes can be used in visionfive2 and star64 7110 board.
The driver is almost the same with kernel driver.
Test with Star64 JH7110 board USB 3.0 + USB 2.0 host.
The code can work.
- Star64 using USB 3.0 and USB 2.0 host must add below board dts setting.
1. usb pin setting
    usb_pins: usb0-0 {
    	driver-vbus-pin {
    		pinmux = <GPIOMUX(25, GPOUT_SYS_USB_DRIVE_VBUS,
    				  GPOEN_ENABLE,
    				  GPI_NONE)>;
    		bias-disable;
    		input-disable;
    		input-schmitt-disable;
    		slew-rate = <0>;
    	};
    };
2. related dts node setting.
&pcie0 {
    status = "disabled";
};
&pciephy0 {
    starfive,sys-syscon = <&sys_syscon 0x18>;
    starfive,stg-syscon = <&stg_syscon 0x148 0x1f4>;
    status = "okay";
};
&usb0 {
    pinctrl-names = "default";
    pinctrl-0 = <&usb_pins>;
    status = "okay";
};
&usb_cdns3 {
    phys = <&usbphy0>, <&pciephy0>;
    phy-names = "cdns3,usb2-phy", "cdns3,usb3-phy";
    dr_mode = "host";
    status = "okay";
};
- previous version
  v1: https://patchwork.ozlabs.org/project/uboot/cover/20240504150358.19600-1-mind...
- patch description.
patch1: Add set phy mode function in cdns3 core driver
        which is used by Starfive JH7110.
patch2-3: USB and PCIe 2.0 (usb 3.0) PHY drivier
patch4: Cadence USB wrapper driver.
patch5: Add JH7110 USB default overcurrent pin.
patch6-8 dts, config and maintainers update.
- change:
    v2:
    - patch 1 Move the added code to cdns3_core_init_role(). Must
      set PHY mode before calling cdns3 role start function.
    - patch 1-4 correct the code format.(follow Marek's comments.)
    - patch 2 Add set 125M clock in PHY init function.
    - Add new patch5.
Minda Chen (8):
  usb: cdns3: Set USB PHY mode in cdns3_core_init_role()
  phy: starfive: Add Starfive JH7110 USB 2.0 PHY driver
  phy: starfive: Add Starfive JH7110 PCIe 2.0 PHY driver
  usb: cdns: starfive: Add cdns USB driver
  pinctrl: starfive: Setup USB default disable overcurrent pin
  configs: starfive: Add visionfive2 cadence USB configuration
  dts: starfive: Add JH7110 Cadence USB dts node
  MAINTAINERS: Update Starfive visionfive2 maintain files.
.../dts/jh7110-starfive-visionfive-2.dtsi     |   5 +
 arch/riscv/dts/jh7110.dtsi                    |  52 +++++
 board/starfive/visionfive2/MAINTAINERS        |   2 +
 configs/starfive_visionfive2_defconfig        |   9 +
 drivers/phy/Kconfig                           |   1 +
 drivers/phy/Makefile                          |   1 +
 drivers/phy/starfive/Kconfig                  |  21 ++
 drivers/phy/starfive/Makefile                 |   7 +
 drivers/phy/starfive/phy-jh7110-pcie.c        | 202 ++++++++++++++++++
 drivers/phy/starfive/phy-jh7110-usb2.c        | 135 ++++++++++++
 drivers/pinctrl/starfive/pinctrl-jh7110-sys.c |  11 +-
 drivers/usb/cdns3/Kconfig                     |   7 +
 drivers/usb/cdns3/Makefile                    |   2 +
 drivers/usb/cdns3/cdns3-starfive.c            | 183 ++++++++++++++++
 drivers/usb/cdns3/core.c                      |  25 +++
 15 files changed, 661 insertions(+), 2 deletions(-)
 create mode 100644 drivers/phy/starfive/Kconfig
 create mode 100644 drivers/phy/starfive/Makefile
 create mode 100644 drivers/phy/starfive/phy-jh7110-pcie.c
 create mode 100644 drivers/phy/starfive/phy-jh7110-usb2.c
 create mode 100644 drivers/usb/cdns3/cdns3-starfive.c
base-commit: 8937bb265a7f2251c1bd999784a4ef10e9c6080d
-- 
2.17.1