There is no need to re-configure sram partition for every read/write for better full use of sram for read or write. This patch divides the half sram for read & half for write once at initialization.
Signed-off-by: Vikas Manocha vikas.manocha@st.com Tested-by: Stefan Roese sr@denx.de ---
Changes in v4: None Changes in v3: Rebased to spi-next-dev Changes in v2: None
drivers/spi/cadence_qspi_apb.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c index 00a115f..f2c22af 100644 --- a/drivers/spi/cadence_qspi_apb.c +++ b/drivers/spi/cadence_qspi_apb.c @@ -38,10 +38,7 @@
/* Controller sram size in word */ #define CQSPI_REG_SRAM_SIZE_WORD (128) -#define CQSPI_REG_SRAM_RESV_WORDS (2) -#define CQSPI_REG_SRAM_PARTITION_WR (1) -#define CQSPI_REG_SRAM_PARTITION_RD \ - (CQSPI_REG_SRAM_SIZE_WORD - CQSPI_REG_SRAM_RESV_WORDS) +#define CQSPI_REG_SRAM_PARTITION_RD (CQSPI_REG_SRAM_SIZE_WORD/2) #define CQSPI_REG_SRAM_THRESHOLD_WORDS (50)
/* Transfer mode */ @@ -538,6 +535,10 @@ void cadence_qspi_apb_controller_init(struct cadence_spi_platdata *plat) /* Configure the remap address register, no remap */ writel(0, plat->regbase + CQSPI_REG_REMAP);
+ /* Indirect mode configurations */ + writel(CQSPI_REG_SRAM_PARTITION_RD, + plat->regbase + CQSPI_REG_SRAMPARTITION); + /* Disable all interrupts */ writel(0, plat->regbase + CQSPI_REG_IRQMASK);
@@ -700,10 +701,6 @@ int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat, writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK), plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
- /* Configure SRAM partition for read. */ - writel(CQSPI_REG_SRAM_PARTITION_RD, plat->regbase + - CQSPI_REG_SRAMPARTITION); - /* Configure the opcode */ rd_reg = cmdbuf[0] << CQSPI_REG_RD_INSTR_OPCODE_LSB;
@@ -801,9 +798,6 @@ int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat, writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK), plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
- writel(CQSPI_REG_SRAM_PARTITION_WR, - plat->regbase + CQSPI_REG_SRAMPARTITION); - /* Configure the opcode */ reg = cmdbuf[0] << CQSPI_REG_WR_INSTR_OPCODE_LSB; writel(reg, plat->regbase + CQSPI_REG_WR_INSTR);