This function has grown into something of a monster. Some boards are setting up a console and DRAM here in SPL. This requires global_data which should be set up in one place (crt0.S).
There is no need for SPL to use s_init() for anything since board_init_f() is called immediately afterwards.
Signed-off-by: Simon Glass sjg@chromium.org ---
arch/arm/cpu/armv7/lowlevel_init.S | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S index f1aea05..4803150 100644 --- a/arch/arm/cpu/armv7/lowlevel_init.S +++ b/arch/arm/cpu/armv7/lowlevel_init.S @@ -17,24 +17,27 @@
ENTRY(lowlevel_init) /* - * Setup a temporary stack + * Setup a temporary stack. Global data is not available yet. */ ldr sp, =CONFIG_SYS_INIT_SP_ADDR - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ -#ifdef CONFIG_SPL_BUILD - ldr r9, =gdata -#else - sub sp, sp, #GD_SIZE - bic sp, sp, #7 - mov r9, sp -#endif + mov r9, #0 /* * Save the old lr(passed in ip) and the current lr to stack */ push {ip, lr}
/* - * go setup pll, mux, memory + * Call the very early init function. This should do only the + * absolute bare minimum to get started. It should not: + * + * - set up DRAM + * - use global_data + * - clear BSS + * - try to start a console + * + * For boards with SPL this should be empty since SPL can do all of + * this init in the SPL board_init_f() function which is called + * immediately after this. */ bl s_init pop {ip, pc}