Dear b29983@freescale.com,
In message 1314686076-11776-1-git-send-email-b29983@freescale.com you wrote:
From: Tang Yuantian B29983@freescale.com
Add the Silicon Image series PCI Express to Serial ATA controller support, including Sil3132, Sil3131 and Sil3124. The SATA controller can be used to load kernel.
The features list:
- Supports 1-lane 2.5 Gbit/s PCI Express
- Supports one/two/four independent Serial ATA channels
- Supports Serial ATA Generation 2 transfer rate of 3.0 Gbit/s
- Supports LBA28 and LBA48
Signed-off-by: Tang Yuantian b29983@freescale.com Signed-off-by: Aaron Williams Aaron.Williams@cavium.com Tested-by: Lan Chunhe b25806@freescale.com
git tree: git://git.denx.de/u-boot.git branch: master Test platform:P1022DS, P4080DS V3:
- remove __IOMEM
- remove force cast
V2:
- add virt_to_bus to translate address
- fix some issues
drivers/block/Makefile | 1 + drivers/block/sata_sil.c | 723 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/block/sata_sil.h | 227 +++++++++++++++ include/pci_ids.h | 5 + 4 files changed, 956 insertions(+), 0 deletions(-) create mode 100644 drivers/block/sata_sil.c create mode 100644 drivers/block/sata_sil.h
Checkpatch says:
total: 0 errors, 2 warnings, 965 lines checked
Please clean up and resubmit. Thanks.
Best regards,
Wolfgang Denk