From: Jagan Teki jagan@amarulasolutions.com
Add initial dts support for i.MX6 Quad Plus Sabresd board.
Boot from MMC: ------------- U-Boot SPL 2017.03-33690-ga80e4f6-dirty (Mar 30 2017 - 00:40:29) Trying to boot from MMC1
U-Boot 2017.03-33690-ga80e4f6-dirty (Mar 30 2017 - 00:40:29 +0530)
CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C) at 29C Reset cause: POR Model: Freescale i.MX6 Quad Plus SABRE Smart Device Board Board: MX6-SabreSD I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 *** Warning - bad CRC, using default environment
gpio@020a4000: dir_output: error: gpio GPIO3_19 not reserved gpio@020a4000: set_value: error: gpio GPIO3_19 not reserved gpio@020b4000: dir_output: error: gpio GPIO7_12 not reserved gpio@020b4000: set_value: error: gpio GPIO7_12 not reserved PCI: pcie phy link never came up No panel detected: default to Hannstar-XGA gpio@0209c000: dir_output: error: gpio GPIO1_21 not reserved Display: Hannstar-XGA (1024x768) In: serial Out: serial Err: serial Net: gpio@0209c000: dir_output: error: gpio GPIO1_25 not reserved gpio@0209c000: set_value: error: gpio GPIO1_25 not reserved FEC [PRIME] Hit any key to stop autoboot: 0 =>
Cc: Stefano Babic sbabic@denx.de Cc: Fabio Estevam fabio.estevam@nxp.com Cc: Michael Trimarchi michael@amarulasolutions.com Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- board/freescale/mx6sabresd/mx6sabresd.c | 4 +++- configs/imx6qdl_sabresd_spl_defconfig | 2 +- 2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 93d0dc4..f7a89bc 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -772,7 +772,9 @@ int spl_start_uboot(void) #ifdef CONFIG_SPL_LOAD_FIT int board_fit_config_name_match(const char *name) { - if (is_mx6dq() && !strcmp(name, "imx6q-sabresd")) + if (is_mx6dqp() && !strcmp(name, "imx6qp-sabresd")) + return 0; + else if (is_mx6dq() && !strcmp(name, "imx6q-sabresd")) return 0; else return -1; diff --git a/configs/imx6qdl_sabresd_spl_defconfig b/configs/imx6qdl_sabresd_spl_defconfig index 27c1311..a292518 100644 --- a/configs/imx6qdl_sabresd_spl_defconfig +++ b/configs/imx6qdl_sabresd_spl_defconfig @@ -13,7 +13,7 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_OF_LIBFDT=y CONFIG_VIDEO=y CONFIG_DEFAULT_DEVICE_TREE="imx6q-sabresd" -CONFIG_OF_LIST="imx6q-sabresd" +CONFIG_OF_LIST="imx6qp-sabresd imx6q-sabresd" CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 # CONFIG_CONSOLE_MUX is not set