Hi,
-----Original Message----- From: Ronald Wahl rwahl@gmx.de Sent: Thursday, December 12, 2024 5:52 AM From: Ronald Wahl ronald.wahl@legrand.com
On 64bit systems the timer value might be truncated to a 32bit value causing malfunctions. For example on ARM the timer might start from 0 again only after a cold reset. The 32bit overflow occurs after a bit more than 49 days (1000 Hz counter) so booting after that time may lead to a surprise because the board might become stuck requiring a cold reset.
Signed-off-by: Ronald Wahl ronald.wahl@legrand.com Cc: Peng Fan peng.fan@nxp.com Cc: Jaehoon Chung jh80.chung@samsung.com
Reviewed-by: Jaehoon Chung jh80.chung@samsung.com
Best Regards, Jaehoon Chung
drivers/mmc/mmc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index efe98354a0..799586891a 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -750,7 +750,7 @@ static int mmc_send_op_cond(struct mmc *mmc) { int err, i; int timeout = 1000;
- uint start;
ulong start;
/* Some cards seem to need this */ mmc_go_idle(mmc);
@@ -844,7 +844,8 @@ int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd) static int __mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value, bool send_status) {
- unsigned int status, start;
- ulong start;
- unsigned int status; struct mmc_cmd cmd; int timeout_ms = DEFAULT_CMD6_TIMEOUT_MS; bool is_part_switch = (set == EXT_CSD_CMD_SET_NORMAL) &&
-- 2.47.1