Hi Priyanka,
On Thu, Dec 02, 2021 at 04:53:54PM +0200, Vladimir Oltean wrote:
The changes were intended to be minimal, but unfortunately I discovered some other stuff as well:
- we need to make some changes to the compatible strings of RTC devices and I2C muxes. This has ramifications to other NXP boards which were also updated.
- I broke Ethernet on LS1028A boards through a patch that is currently in Ramon's tree.
Therefore this patch set is a bit larger than would be otherwise expected.
The Linux device tree changes have just been posted by me here and are currently in flight, but they are rather small so I don't expect too much pushback on them: https://lore.kernel.org/linux-arm-kernel/20211202141528.2450169-5-vladimir.o...
Cc: Heiko Schocher hs@denx.de Cc: Simon Glass sjg@chromium.org Cc: Ramon Fried rfried.dev@gmail.com
Vladimir Oltean (15): i2c: muxes: pca954x: add PCA9847 variant rtc: pcf2127: sync with Linux compatible strings arm: dts: ls1028a-qds: use Linux compatible string for RTC arm: ls1088a-qds: use Linux compatible string for RTC arm: ls1088a-rdb: use Linux compatible string for RTC arm: lx2160a-qds: use Linux compatible string for RTC arm: dts: lx2160a-rdb: use Linux compatible string for RTC rtc: pcf2127: remove U-Boot specific compatible string arm: dts: ls1028a-rdb: sort nodes alphabetically arm: dts: ls1028a-rdb: sync Ethernet device tree nodes with Linux arm: dts: ls1028a-rdb: disable DSPI nodes arm: dts: ls1028a-rdb: disable I2C buses 1 through 7 arm: dts: ls1028a-rdb: enable PCIe controllers from U-Boot dtsi arm: dts: ls1028a-rdb: sync device tree with Linux arm: dts: ls1028a-qds: declare in-band autoneg for Ethernet ports
.../dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi | 1 + .../dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi | 1 + .../fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi | 4 + .../dts/fsl-ls1028a-qds-9999-sch-24801.dtsi | 4 + .../fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi | 4 + .../fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi | 4 + arch/arm/dts/fsl-ls1028a-qds.dtsi | 2 +- arch/arm/dts/fsl-ls1028a-rdb-u-boot.dtsi | 14 + arch/arm/dts/fsl-ls1028a-rdb.dts | 295 ++++++++++++------ arch/arm/dts/fsl-ls1088a-qds.dtsi | 2 +- arch/arm/dts/fsl-ls1088a-rdb.dts | 2 +- arch/arm/dts/fsl-lx2160a-qds.dtsi | 2 +- arch/arm/dts/fsl-lx2160a-rdb.dts | 2 +- drivers/i2c/muxes/pca954x.c | 9 +- drivers/rtc/pcf2127.c | 4 +- 15 files changed, 241 insertions(+), 109 deletions(-) create mode 100644 arch/arm/dts/fsl-ls1028a-rdb-u-boot.dtsi
-- 2.25.1
There is a slight sense of urgency to these patches, especially "arm: dts: ls1028a-rdb: sync Ethernet device tree nodes with Linux" and "arm: dts: ls1028a-qds: declare in-band autoneg for Ethernet ports", since these fix broken networking on LS1028A boards. I would therefore be very appreciative if you could review the changes soon.