From: Peng Fan peng.fan@nxp.com
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code. set_wdog_reset function could be handled by imx_watchdog.c driver.
Signed-off-by: Peng Fan peng.fan@nxp.com --- board/phytec/phycore_imx8mm/spl.c | 19 ------------------- board/phytec/phycore_imx8mp/spl.c | 19 ------------------- 2 files changed, 38 deletions(-)
diff --git a/board/phytec/phycore_imx8mm/spl.c b/board/phytec/phycore_imx8mm/spl.c index 7f24a3affc8..d87ab6d4497 100644 --- a/board/phytec/phycore_imx8mm/spl.c +++ b/board/phytec/phycore_imx8mm/spl.c @@ -57,23 +57,6 @@ int board_fit_config_name_match(const char *name) return 0; }
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE) - -static iomux_v3_cfg_t const wdog_pads[] = { - IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), -}; - -int board_early_init_f(void) -{ - struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; - - imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); - - set_wdog_reset(wdog); - - return 0; -} - void board_init_f(ulong dummy) { int ret; @@ -82,8 +65,6 @@ void board_init_f(ulong dummy)
init_uart_clk(2);
- board_early_init_f(); - /* Clear the BSS. */ memset(__bss_start, 0, __bss_end - __bss_start);
diff --git a/board/phytec/phycore_imx8mp/spl.c b/board/phytec/phycore_imx8mp/spl.c index 38a581bef57..faed6fc3b76 100644 --- a/board/phytec/phycore_imx8mp/spl.c +++ b/board/phytec/phycore_imx8mp/spl.c @@ -89,23 +89,6 @@ int board_fit_config_name_match(const char *name) return 0; }
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) - -static iomux_v3_cfg_t const wdog_pads[] = { - MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), -}; - -int board_early_init_f(void) -{ - struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; - - imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); - - set_wdog_reset(wdog); - - return 0; -} - void board_init_f(ulong dummy) { int ret; @@ -114,8 +97,6 @@ void board_init_f(ulong dummy)
init_uart_clk(0);
- board_early_init_f(); - ret = spl_early_init(); if (ret) { debug("spl_early_init() failed: %d\n", ret);