hi Wolfgang,
i used BMW configuration and now o/p is
U-Boot 1.1.6 (Sep 3 2008 - 21:48:59)
CPU: MPC8245 Revision 1.2 at 198 MHz: 16 kB I-Cache 16 kB D-Cache Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B) Built: Sep 3 2008 at 21:48:59 Local Bus at 99 MHz DRAM: 64 MB FLASH: *** failed *** ### ERROR ### Please RESET the board ###
What are macros i have to look at to pass the FLASH test.and actual DRAM is 256 MB but its showing 64 MB.
Regards, Ramji
On Wed, Sep 3, 2008 at 9:00 PM, John W. Linville linville@tuxdriver.comwrote:
On Wed, Sep 03, 2008 at 08:44:37PM +0530, Ramji PanchaReddy wrote:
Hi Wolfgang, Thanks a lot for your response ..
I also tried BMW_config and used cross-compiler as ppc_82xx-* .When i
load
this i did not get any thing on console. My processor is MPC8245.
From what I recall about BMW, you probably want to go through the BMW-related configuration bits and verify all the clock settings, memory settings, etc for your exact version of the board. IIRC the vendor was a bit prone to changing such things between different versions.
Good luck!
John
John W. Linville linville@tuxdriver.com