Add option to include RESET driver and uclass in SPL. That can be useful to handle IP reset with same driver in U-Boot and in SPL.
Signed-off-by: Patrick Delaunay patrick.delaunay@st.com ---
common/spl/Kconfig | 9 +++++++++ drivers/Makefile | 1 + 2 files changed, 10 insertions(+)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index f58163c..baec39e 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -568,6 +568,15 @@ config SPL_POST_MEM_SUPPORT performed before booting. This enables the drivers in post/drivers as part of an SPL build.
+config SPL_RESET_SUPPORT + bool "Support reset drivers" + depends on SPL + help + Enable support for reset control in SPL. + That can be useful in SPL to handle IP reset in driver, as in U-Boot, + by using the generic reset API provided by driver model. + This enables the drivers in drivers/reset as part of an SPL build. + config SPL_POWER_SUPPORT bool "Support power drivers" help diff --git a/drivers/Makefile b/drivers/Makefile index e6062a5..9648ebd 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/ obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/ obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/ obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/ +obj-$(CONFIG_SPL_RESET_SUPPORT) += reset/ obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/ obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/ obj-$(CONFIG_SPL_UBI) += mtd/ubispl/