On Wed, May 30, 2018 at 5:49 AM, Chris Packham judge.packham@gmail.com wrote:
Combine repeated code from smi_reg_read/smi_reg_write into a common function smi_wait_ready.
Signed-off-by: Chris Packham judge.packham@gmail.com
drivers/net/mvgbe.c | 48 ++++++++++++++++++++++----------------------- 1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c index 4e1aff6e3a86..ca91897fdd14 100644 --- a/drivers/net/mvgbe.c +++ b/drivers/net/mvgbe.c @@ -40,10 +40,26 @@ DECLARE_GLOBAL_DATA_PTR; #define MVGBE_SMI_REG (((struct mvgbe_registers *)MVGBE0_BASE)->smi)
#if defined(CONFIG_PHYLIB) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII) +static int smi_wait_ready(struct mvgbe_device *dmvgbe) +{
u32 timeout = MVGBE_PHY_SMI_TIMEOUT;u32 smi_reg;do {smi_reg = MVGBE_REG_RD(MVGBE_SMI_REG);if (timeout-- == 0) {printf("Error: SMI busy timeout\n");return -EFAULT;}} while (smi_reg & MVGBE_PHY_SMI_BUSY_MASK);
Please use wait_for_bit_le32(MVGBE_SMI_REG, MVGBE_PHY_SMI_BUSY_MASK, true, MVGBE_PHY_SMI_TIMEOUT_MS, false);
Convert the timeout to ms.
It's in include/wait_bit.h
return 0;+}
/*
- smi_reg_read - miiphy_read callback function.
- Returns 16bit phy register value, or 0xffff on error
*/
- Returns 16bit phy register value, or -EFAULT on error
static int smi_reg_read(struct mii_dev *bus, int phy_adr, int devad, int reg_ofs) @@ -74,16 +90,9 @@ static int smi_reg_read(struct mii_dev *bus, int phy_adr, int devad, return -EFAULT; }
timeout = MVGBE_PHY_SMI_TIMEOUT; /* wait till the SMI is not busy */do {/* read smi register */smi_reg = MVGBE_REG_RD(MVGBE_SMI_REG);if (timeout-- == 0) {printf("Err..(%s) SMI busy timeout\n", __func__);return -EFAULT;}} while (smi_reg & MVGBE_PHY_SMI_BUSY_MASK);
if (smi_wait_ready(dmvgbe) < 0)return -EFAULT; /* fill the phy address and regiser offset and read opcode */ smi_reg = (phy_adr << MVGBE_PHY_SMI_DEV_ADDR_OFFS)@@ -119,10 +128,9 @@ static int smi_reg_read(struct mii_dev *bus, int phy_adr, int devad, }
/*
- smi_reg_write - imiiphy_write callback function.
- smi_reg_write - miiphy_write callback function.
- Returns 0 if write succeed, -EINVAL on bad parameters
- -ETIME on timeout
*/
- Returns 0 if write succeed, -EFAULT on error
static int smi_reg_write(struct mii_dev *bus, int phy_adr, int devad, int reg_ofs, u16 data) @@ -131,7 +139,6 @@ static int smi_reg_write(struct mii_dev *bus, int phy_adr, int devad, struct mvgbe_device *dmvgbe = to_mvgbe(dev); struct mvgbe_registers *regs = dmvgbe->regs; u32 smi_reg;
u32 timeout; /* Phyadr write request*/ if (phy_adr == MV_PHY_ADR_REQUEST &&@@ -147,19 +154,12 @@ static int smi_reg_write(struct mii_dev *bus, int phy_adr, int devad, } if (reg_ofs > PHYREG_MASK) { printf("Err..(%s) Invalid register offset\n", __func__);
return -EINVAL;
return -EFAULT; } /* wait till the SMI is not busy */
timeout = MVGBE_PHY_SMI_TIMEOUT;do {/* read smi register */smi_reg = MVGBE_REG_RD(MVGBE_SMI_REG);if (timeout-- == 0) {printf("Err..(%s) SMI busy timeout\n", __func__);return -ETIME;}} while (smi_reg & MVGBE_PHY_SMI_BUSY_MASK);
if (smi_wait_ready(dmvgbe) < 0)return -EFAULT; /* fill the phy addr and reg offset and write opcode and data */ smi_reg = (data << MVGBE_PHY_SMI_DATA_OFFS);-- 2.17.0
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot