Hi folks: A new project about porting u-boot is assigned to me. but I don't have any experience about it. I read the readme file from the u-boot 1.1.1 source code. A clear procedure of the porting comes in my mind. But there are also some basic issues about it. please give me some hints about it.
1. Generally, what kind tool is good for debugging the u-boot code? our platform is based on ARM archtechiture, so MultiICE is avaiable for us.
2. What is the minimal requirement for running the u-boot? CPU->SDRAM->serial port? After serail is ok, then we can add some printf stuff in the next developing code. Is that right?
please give us some advice about it. Thank a lot.
P.S. Hi wolfgang, our system administrator check the ISP email server. He said it's IP was blocked by the sourceforge.net mailist server. Could you unblock it? Our email server's IP is 211.144.200.5
Thanks a lot Best Regards
Bryan Wu in China
_________________________________________________________ Do You Yahoo!? 100兆邮箱够不够用？雅虎电邮自助扩容！ http://cn.rd.yahoo.com/mail_cn/tag/100m/*http://cn.promo.yahoo.com/minisite/...