On Tue, Apr 16, 2019 at 04:49:12PM +1000, Jonathan Gray wrote:
On Fri, Apr 05, 2019 at 12:10:21PM +0200, Wadim Egorov wrote:
Hi,
it seems the new common rockchip pinctrl driver does not really fit into our phycore-rk3288 SPL setup. It works for every other rk3288 based board because they don't need special power configurations at the SPL stage.
It turns out tinker-rk3288 SPL no longer fits in 2019.04 and previously worked fine in 2019.01.
Warning: SPL image is too large (size 0x8800) and will not boot Error: image verification failed
built with gcc-linaro 6.3.2017.02
bisecting led to the pinctrl changes.
with SPL_PINCTRL_ROCKCHIP disabled it fits and U-Boot output on serial gets as far as the efi loader then no output appears on serial when a kernel is loaded.
Changing the defconfig to not have CONFIG_SPL_I2C_SUPPORT=y also fits and also still hangs on loading a kernel.