Add the vcc3v3-supply regulator and its link to the pcie controllers.
Tested-by: Uwe Kleine-König ukleinek@debian.org Signed-off-by: Heiko Stuebner heiko@sntech.de Link: https://lore.kernel.org/r/20240723195538.1133436-2-heiko@sntech.de
[this needs to be replaced, once the patch hits the devicetree-rebasing repo]
Signed-off-by: Heiko Stuebner heiko@sntech.de --- .../src/arm64/rockchip/rk3568-qnap-ts433.dts | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts index 6a998166003..07b4f095d76 100644 --- a/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts +++ b/dts/upstream/src/arm64/rockchip/rk3568-qnap-ts433.dts @@ -12,6 +12,25 @@ / { model = "Qnap TS-433-4G NAS System 4-Bay"; compatible = "qnap,ts433", "rockchip,rk3568"; + + dc_12v: regulator-dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_pcie: regulator-vcc3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + vin-supply = <&dc_12v>; + }; };
&gmac0 { @@ -62,9 +81,11 @@ status = "okay"; };
+/* Connected to a JMicron AHCI SATA controller */ &pcie3x1 { /* The downstream dts has: rockchip,bifurcation, XXX: find out what this is about */ reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; status = "okay"; };