Dear Tom Rix,
In message 4AD478AE.10302@bumblecow.com you wrote:
Wolfgang,
I have cleaned up the commits to arm/master-sync.
The cleanup is from doing a git rev-list --reverse master..arm/master Then working back from my notes to take only the commits were either misc arm or other arm pull requests. These were cherry picked on top of the current u-boot/master.
I ran the MAKEALL regression and the results look like what I posted on Sunday.
That said, it would be a good idea to wait a bit for others to review this list and pick up on anything that I missed.
I will be offline for about 10hrs and will fix any problems then.
Tom
The following changes since commit
14abfe361b3ed23b02f564e2f5d663e158cd5799:
Wolfgang Denk (1): Merge branch 'master' of /home/wd/git/u-boot/custodians
are available in the git repository at:
git://git.denx.de/u-boot-arm master-sync
Daniel Gorsulowski (1): at91: Update MEESC board support
Dirk Behme (1): OMAP3 MMC: Fix warning dereferencing type-punned pointer
Olof Johansson (3): OMAP3: Clean up whitespace in mux configs SMC911X: Add chip auto detection TI: OMAP3: Overo Tobi ethernet support
Prafulla Wadaskar (2): Kirkwood: rd6281a: Add kwbimage build support Kirkwood: mv88f6281gtw_ge: Add kwbimage build support
Sandeep Paulraj (9): TI DaVinci: Remove references to SZ_xx TI DaVinci: DM6446: Fix Compilation error in NAND mode TI DaVinci: DM646x: Initial Support for DM646x SOC TI DaVinci: DM355: Config Cleanup and Update TI DaVinci DM365: Removing header file which does not exist TI: DaVinci DM365: Minor config cleanup TI: DaVinci DM646x: Update flag used to represent DM646x SOC's TI: DaVinci: GPIO header file and definitions TI: DaVinci DM365: Enabling network Support on DM365 EVM
Simon Kagstrom (2): Support for the OpenRD base board arm: Correct build with CONFIG_SYS_HUSH_PARSER set
Tom Rix (4): OMAP3 Move cache routine to cache.S Add support for Eukrea CPUAT91 SBC Add support for Eukrea CPU9260/CPU9G20 SBC TI OMAP3 Use arm init sequence to initialize i2c
MAINTAINERS | 10 + MAKEALL | 6 +- Makefile | 17 + board/Marvell/mv88f6281gtw_ge/config.mk | 3 + board/Marvell/mv88f6281gtw_ge/kwbimage.cfg | 165 +++++++ board/Marvell/openrd_base/Makefile | 56 +++ board/Marvell/openrd_base/config.mk | 33 ++ board/Marvell/openrd_base/kwbimage.cfg | 168 +++++++ board/Marvell/openrd_base/openrd_base.c | 160 +++++++ board/Marvell/openrd_base/openrd_base.h | 46 ++ board/Marvell/rd6281a/config.mk | 3 + board/Marvell/rd6281a/kwbimage.cfg | 167 +++++++ board/davinci/dm365evm/dm365evm.c | 44 ++- board/esd/meesc/meesc.c | 65 +++- board/eukrea/cpu9260/Makefile | 59 +++ board/eukrea/cpu9260/config.mk | 1 + board/eukrea/cpu9260/cpu9260.c | 220 +++++++++ board/eukrea/cpu9260/led.c | 153 +++++++ board/eukrea/cpuat91/Makefile | 50 +++ board/eukrea/cpuat91/config.mk | 1 + board/eukrea/cpuat91/cpuat91.c | 81 ++++ board/logicpd/zoom1/zoom1.h | 164 ++++---- board/logicpd/zoom2/zoom2.h | 188 ++++---- board/overo/overo.c | 59 +++ board/overo/overo.h | 645 ++++++++++++++-------------- board/pandora/pandora.h | 662 ++++++++++++++-------------- board/ti/beagle/beagle.h | 640 ++++++++++++++-------------- board/ti/evm/evm.h | 662 ++++++++++++++-------------- board/timll/devkit8000/devkit8000.h | 628 +++++++++++++------------- cpu/arm920t/at91rm9200/Makefile | 5 +- cpu/arm920t/at91rm9200/ks8721.c | 249 +++++++++++ cpu/arm926ejs/at91/lowlevel_init.S | 3 +- cpu/arm926ejs/davinci/Makefile | 1 + cpu/arm926ejs/davinci/dm646x.c | 41 ++ cpu/arm926ejs/kirkwood/cpu.c | 1 + cpu/arm_cortexa8/cpu.c | 2 +- cpu/arm_cortexa8/omap3/Makefile | 2 +- cpu/arm_cortexa8/omap3/board.c | 2 +- cpu/arm_cortexa8/omap3/cache.S | 191 ++++++++ cpu/arm_cortexa8/omap3/cache.c | 95 ---- cpu/arm_cortexa8/start.S | 85 ---- drivers/mmc/omap3_mmc.c | 48 +-- drivers/net/smc911x.c | 14 +- drivers/net/smc911x.h | 7 +- include/asm-arm/arch-davinci/emac_defs.h | 4 +- include/asm-arm/arch-davinci/gpio_defs.h | 53 +++ include/asm-arm/arch-davinci/hardware.h | 11 + include/asm-arm/arch-davinci/nand_defs.h | 2 +- include/asm-arm/arch-omap3/mmc.h | 7 + include/asm-arm/arch-omap3/omap3.h | 2 + include/asm-arm/arch-omap3/sys_proto.h | 2 +- include/configs/cpu9260.h | 453 +++++++++++++++++++ include/configs/cpuat91.h | 228 ++++++++++ include/configs/davinci_dm355evm.h | 26 +- include/configs/davinci_dm365evm.h | 11 +- include/configs/davinci_dvevm.h | 6 +- include/configs/davinci_schmoogie.h | 3 +- include/configs/davinci_sffsdr.h | 3 +- include/configs/davinci_sonata.h | 3 +- include/configs/devkit8000.h | 1 + include/configs/meesc.h | 25 +- include/configs/omap3_beagle.h | 1 + include/configs/omap3_evm.h | 1 + include/configs/omap3_overo.h | 18 +- include/configs/omap3_pandora.h | 1 + include/configs/omap3_zoom1.h | 1 + include/configs/omap3_zoom2.h | 1 + include/configs/openrd_base.h | 220 +++++++++ include/ks8721.h | 78 ++++ 69 files changed, 4988 insertions(+), 2075 deletions(-) create mode 100644 board/Marvell/mv88f6281gtw_ge/kwbimage.cfg create mode 100644 board/Marvell/openrd_base/Makefile create mode 100644 board/Marvell/openrd_base/config.mk create mode 100644 board/Marvell/openrd_base/kwbimage.cfg create mode 100644 board/Marvell/openrd_base/openrd_base.c create mode 100644 board/Marvell/openrd_base/openrd_base.h create mode 100644 board/Marvell/rd6281a/kwbimage.cfg create mode 100644 board/eukrea/cpu9260/Makefile create mode 100644 board/eukrea/cpu9260/config.mk create mode 100644 board/eukrea/cpu9260/cpu9260.c create mode 100644 board/eukrea/cpu9260/led.c create mode 100644 board/eukrea/cpuat91/Makefile create mode 100644 board/eukrea/cpuat91/config.mk create mode 100644 board/eukrea/cpuat91/cpuat91.c create mode 100644 cpu/arm920t/at91rm9200/ks8721.c create mode 100644 cpu/arm926ejs/davinci/dm646x.c create mode 100644 cpu/arm_cortexa8/omap3/cache.S delete mode 100644 cpu/arm_cortexa8/omap3/cache.c create mode 100644 include/asm-arm/arch-davinci/gpio_defs.h create mode 100644 include/configs/cpu9260.h create mode 100644 include/configs/cpuat91.h create mode 100644 include/configs/openrd_base.h create mode 100644 include/ks8721.h
Thanks. Applied locally. Will run some build tests and then push it out.
Wolfgang,
I want to let you know that there will probably be some compilation warnings. These are patches for these. These have been sent to the list and ACK'ed by Tom and currently in my master. This will be part of my next pull request.
This pull request of mine will hopefully be the last for 2009.11.
Sandeep
Best regards,
Wolfgang Denk