Dear Heiko Schocher,
In message 1299591018-8944-3-git-send-email-hs@denx.de you wrote:
- serial console on UART1
- Ethernet RMII over UCC4
- PHY SMSC LAN8700
- 64MB Flash
- 128 MB DDR2 RAM
- I2C
- bootcount
This board is similiar to the kmeter1 (8360) board, so common config options are extracted into the include/configs/km83xx-common.h file.
...
-#if defined(CONFIG_BOOTCOUNT_LIMIT) && defined(CONFIG_MPC8360) +#if defined(CONFIG_BOOTCOUNT_LIMIT) && \
- (defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x))
#include <asm/immap_qe.h>
Please keep lists sorted: 832x < 8360. Please fix globally.
+phys_size_t initdram (int board_type) +{ +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- extern void ddr_enable_ecc (unsigned int dram_size);
+#endif
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- u32 msize = 0;
- if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
return -1;- /* DDR SDRAM - Main SODIMM */
Is this comment correct?
- im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
- msize = fixed_sdram ();
Can we not use get_ram_size() ?
+extern int ivm_read_eeprom (void);
Protoypes belong to header files.
Um... seems you did not run checkpatch?
I see this:
[PATCH 01/20] keymile: rework headerfiles for keymile boards total: 0 errors, 16 warnings, 659 lines checked [PATCH 02/20] mpc832x: add support for the mpc8321 based suvd3 board total: 17 errors, 63 warnings, 1326 lines checked [PATCH 03/20] mpc832x: add support for mpc8321 based tuxa1 board total: 16 errors, 2 warnings, 250 lines checked [PATCH 04/20] mpc832x: add support for mpc8321 based tuda1 board total: 0 errors, 4 warnings, 265 lines checked ... [PATCH 06/20] arm: add support of Kirkwood based board SUEN8 total: 0 errors, 1 warnings, 73 lines checked [PATCH 07/20] ppc: add support for ppc based board mgcoge2ne total: 11 errors, 14 warnings, 733 lines checked ... [PATCH 09/20] powerpc, 83xx: add kmsupx5 board support total: 3 errors, 3 warnings, 103 lines checked [PATCH 10/20] km-arm: i2c support for suenx based boards total: 1 errors, 0 warnings, 70 lines checked ... [PATCH 12/20] ppc, 8321: cleanup tuxa1, tuda1 and suvd3 support total: 1 errors, 5 warnings, 570 lines checked [PATCH 13/20] keymile, common; fix i2c deblocking support total: 0 errors, 21 warnings, 161 lines checked [PATCH 14/20] arm, keymile: updates for the arm based boards from keymile total: 0 errors, 2 warnings, 142 lines checked [PATCH 15/20] keymile boards: add CONFIG_PIGGY_MAC_ADRESS_OFFSET total: 1 errors, 1 warnings, 38 lines checked [PATCH 16/20] keymile, common: add setting of some environment variables total: 0 errors, 7 warnings, 145 lines checked [PATCH 17/20] ppc, arm: rework and enhance keymile-common.h total: 0 errors, 3 warnings, 253 lines checked ... [PATCH 19/20] keymile-common.h: remove IO mux stuff total: 3 errors, 5 warnings, 27 lines checked
Please check and fix where needed. I stop reviewing here.
Best regards,
Wolfgang Denk