Hi Christian,
On Tue, Jun 19, 2012 at 01:09:08, Christian Riesch wrote:
Hi, Sorry for the delay, had a lot of other work to do :-/
On Thursday, June 7, 2012, Prabhakar Lad wrote:
From: Lad, Prabhakar <prabhakar.lad@ti.com javascript:; >
DA850/OMAP-L138 does not support strict MMC/SD boot mode. SPL will be in SPI flash and U-Boot image will be in MMC/SD card. SPL will do the low level initialization and then loads the u-boot image from MMC/SD card.
Define the CONFIG_SPL_MMC_LOAD macro in the DA850/OMAP-L138 configuration file to enable this feature.
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com javascript:; > Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com javascript:; > Signed-off-by: Hadli, Manjunath <manjunath.hadli@ti.com javascript:; >
arch/arm/cpu/arm926ejs/davinci/spl.c | 12 ++++++- drivers/mmc/Makefile | 4 ++ drivers/mmc/spl_mmc_load.c | 62++++++++++++++++++++++++++++++++++ include/configs/da850evm.h | 8 ++++ include/mmc.h | 2 + 5 files changed, 87 insertions(+), 1 deletions(-) create mode 100644 drivers/mmc/spl_mmc_load.c
diff --git a/arch/arm/cpu/arm926ejs/davinci/spl.c b/arch/arm/cpu/arm926ejs/davinci/spl.c index 74632e5..be397ce 100644 --- a/arch/arm/cpu/arm926ejs/davinci/spl.c +++ b/arch/arm/cpu/arm926ejs/davinci/spl.c @@ -28,6 +28,11 @@ #include <ns16550.h> #include <malloc.h> #include <spi_flash.h> +#include <mmc.h> +#include <fat.h> +#include <version.h> +#include <asm/arch/davinci_misc.h> +#include <asm/arch/pinmux_defs.h>
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT@@ -91,6 +96,11 @@ void board_init_r(gd_t *id, ulong dummy) gd->have_console = 1;
puts("SPI boot...\n");+#ifdef CONFIG_SPL_MMC_LOAD
spl_mmc_load();+#else spi_boot(); -#endif
Hmm, now the code prints "SPI boot" and then it boots from MMC, right? Please output correct messages.
The board is booted up in SPI boot mode only, ie the SPL is loaded from SPI flash itself and finally when low level initialization is completed The SPL loads the U-boot image in MMC/SD card when CONFIG_SPL_MMC_LOAD Config is defined. If CONFIG_SPL_MMC_LOAD is not defined by default the SPL loads the U-boot image from SPI flash itself.
+#endif /* CONFIG_SPL_MMC_LOAD */
+#endif /* CONFIG_SPL_SPI_LOAD */
So, CONFIG_SPL_SPI_LOAD must be defined to boot from MMC?? Ths does not make sense to me.
No not to boot from MMC, its indicating to SPL which is flashed in SPI flash to load the U-boot image(u-boot.bin) from MMC.
Thx, --Prabhakar Lad
Regards, Christian