This defconfig does not support SPL. If you use this, the basic SoC initialization must be done in firmware that runs before U-Boot. (Generally, ARM Trusted Firmware is expected to do this job).
Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---
configs/uniphier_v8_defconfig | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 configs/uniphier_v8_defconfig
diff --git a/configs/uniphier_v8_defconfig b/configs/uniphier_v8_defconfig new file mode 100644 index 0000000..d02b84e --- /dev/null +++ b/configs/uniphier_v8_defconfig @@ -0,0 +1,34 @@ +CONFIG_ARM=y +CONFIG_ARCH_UNIPHIER=y +CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_ARCH_UNIPHIER_V8_MULTI=y +CONFIG_MICRO_SUPPORT_CARD=y +CONFIG_SYS_TEXT_BASE=0x84000000 +CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld20-ref" +# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_ENV_EXISTS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +# CONFIG_CMD_MISC is not set +CONFIG_CMD_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_GPIO_UNIPHIER=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_MMC_UNIPHIER=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_CADENCE=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3_UNIPHIER=y +CONFIG_USB_STORAGE=y