Adding the build support for dra7xx_evm. Reusing omap5_evm.h config by moving it to omap5_common.h
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com Signed-off-by: R Sricharan r.sricharan@ti.com --- [v2] Addressed Tom Rini's trini@ti.com comments
boards.cfg | 1 + include/configs/dra7xx_evm.h | 36 ++++ include/configs/{omap5_evm.h => omap5_common.h} | 18 +- include/configs/omap5_evm.h | 241 +---------------------- 4 files changed, 48 insertions(+), 248 deletions(-) create mode 100644 include/configs/dra7xx_evm.h copy include/configs/{omap5_evm.h => omap5_common.h} (94%)
diff --git a/boards.cfg b/boards.cfg index 98f7a14..fea1101 100644 --- a/boards.cfg +++ b/boards.cfg @@ -279,6 +279,7 @@ nokia_rx51 arm armv7 rx51 nokia omap4_panda arm armv7 panda ti omap4 omap4_sdp4430 arm armv7 sdp4430 ti omap4 omap5_evm arm armv7 omap5_evm ti omap5 +dra7xx_evm arm armv7 dra7xx ti omap5 s5p_goni arm armv7 goni samsung s5pc1xx smdkc100 arm armv7 smdkc100 samsung s5pc1xx origen arm armv7 origen samsung exynos diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h new file mode 100644 index 0000000..10a4939 --- /dev/null +++ b/include/configs/dra7xx_evm.h @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2013 + * Texas Instruments Incorporated. + * Lokesh Vutla lokeshvutla@ti.com + * + * Configuration settings for the TI DRA7XX board. + * See omap5_common.h for omap5 common settings. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_DRA7XX_EVM_H +#define __CONFIG_DRA7XX_EVM_H + +#include <configs/omap5_common.h> + +#define CONFIG_DRA7XX /* in a TI DRA7XX core */ +#define CONFIG_SYS_PROMPT "DRA752 EVM # " + +#endif /* __CONFIG_DRA7XX_EVM_H */ diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_common.h similarity index 94% copy from include/configs/omap5_evm.h copy to include/configs/omap5_common.h index 1d3ac2b..a162d63 100644 --- a/include/configs/omap5_evm.h +++ b/include/configs/omap5_common.h @@ -1,12 +1,12 @@ /* - * (C) Copyright 2010 + * (C) Copyright 2013 * Texas Instruments Incorporated. * Sricharan R r.sricharan@ti.com * * Derived from OMAP4 done by: * Aneesh V aneesh@ti.com * - * Configuration settings for the TI EVM5430 board. + * TI OMAP5 AND DRA7XX common configuration settings * * See file CREDITS for list of people who contributed to this * project. @@ -27,17 +27,14 @@ * MA 02111-1307 USA */
-#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __CONFIG_OMAP5_COMMON_H +#define __CONFIG_OMAP5_COMMON_H
/* * High Level Configuration Options */ -#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */ #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP54XX /* which is a 54XX */ -#define CONFIG_OMAP5430 /* which is in a 5430 */ -#define CONFIG_5430EVM /* working with EVM */ #define CONFIG_OMAP_GPIO
/* Get CPU defs */ @@ -96,10 +93,6 @@ #define CONFIG_DRIVER_OMAP34XX_I2C #define CONFIG_I2C_MULTI_BUS
-/* TWL6035 */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_TWL6035_POWER -#endif
/* MMC */ #define CONFIG_GENERIC_MMC @@ -185,7 +178,6 @@
#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "OMAP5430 EVM # " #define CONFIG_SYS_CBSIZE 256 /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ @@ -266,4 +258,4 @@ #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ #define CONFIG_SPL_GPIO_SUPPORT
-#endif /* __CONFIG_H */ +#endif /* __CONFIG_OMAP5_COMMON_H */ diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h index 1d3ac2b..22a8e13 100644 --- a/include/configs/omap5_evm.h +++ b/include/configs/omap5_evm.h @@ -1,12 +1,10 @@ /* - * (C) Copyright 2010 + * (C) Copyright 2013 * Texas Instruments Incorporated. * Sricharan R r.sricharan@ti.com * - * Derived from OMAP4 done by: - * Aneesh V aneesh@ti.com - * * Configuration settings for the TI EVM5430 board. + * See omap5_common.h for omap5 common settings. * * See file CREDITS for list of people who contributed to this * project. @@ -27,243 +25,16 @@ * MA 02111-1307 USA */
-#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */ -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP54XX /* which is a 54XX */ -#define CONFIG_OMAP5430 /* which is in a 5430 */ -#define CONFIG_5430EVM /* working with EVM */ -#define CONFIG_OMAP_GPIO - -/* Get CPU defs */ -#include <asm/arch/cpu.h> -#include <asm/arch/omap.h> - -/* Display CPU and Board Info */ -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -/* Clock Defines */ -#define V_OSCK 19200000 /* Clock output from T2 */ -#define V_SCLK V_OSCK - -#define CONFIG_MISC_INIT_R - -#define CONFIG_OF_LIBFDT - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -/* - * Size of malloc() pool - * Total Size Environment - 128k - * Malloc - add 256k - */ -#define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) -/* Vector Base */ -#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE - -/* - * Hardware drivers - */ - -/* - * serial port - NS16550 compatible - */ -#define V_NS16550_CLK 48000000 - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 UART3_BASE +#ifndef __CONFIG_OMAP5_EVM_H +#define __CONFIG_OMAP5_EVM_H
-#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} -/* I2C */ -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C -#define CONFIG_I2C_MULTI_BUS +#include <configs/omap5_common.h>
/* TWL6035 */ #ifndef CONFIG_SPL_BUILD #define CONFIG_TWL6035_POWER #endif
-/* MMC */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_OMAP_HSMMC -#define CONFIG_DOS_PARTITION - -/* MMC ENV related defines */ -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ -#define CONFIG_ENV_OFFSET 0xE0000 -#define CONFIG_CMD_SAVEENV - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -/* Flash */ -#define CONFIG_SYS_NO_FLASH - -/* Cache */ -#define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_SYS_CACHELINE_SHIFT 6 - -/* commands to include */ -#include <config_cmd_default.h> - -/* Enabled commands */ -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_SAVEENV - -/* Disabled commands */ -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMLS /* List all found images */ - -/* - * Environment setup - */ - -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "console=ttyO2,115200n8\0" \ - "usbtty=cdc_acm\0" \ - "vram=16M\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "vram=${vram} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ - "source ${loadaddr}\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc${mmcdev} ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "fi; " \ - "fi; " \ - "fi" - -#define CONFIG_AUTO_COMPLETE 1 - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT "OMAP5430 EVM # " -#define CONFIG_SYS_CBSIZE 256 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -/* - * memtest setup - */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20)) - -/* Default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x80000000 - -/* Use General purpose timer 1 */ -#define CONFIG_SYS_TIMERBASE GPT2_BASE -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 - -/* - * SDRAM Memory Map - * Even though we use two CS all the memory - * is mapped to one contiguous block - */ -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - -/* Defines for SDRAM init */ -#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION -#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -#endif - -/* Defines for SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x40300350 -#define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */ -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR -#define CONFIG_SPL_DISPLAY_PRINT - -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" - -/* - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 80E7FFC0--0x80E80000 should not be used for any - * other needs. - */ -#define CONFIG_SYS_TEXT_BASE 0x80E80000 - -/* - * BSS and malloc area 64MB into memory to allow enough - * space for the kernel at the beginning of memory - */ -#define CONFIG_SPL_BSS_START_ADDR 0x84000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x84100000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SPL_GPIO_SUPPORT
-#endif /* __CONFIG_H */ +#endif /* __CONFIG_OMAP5_EVM_H */