use CONFIG_IS_ENABLED for clock enable/disable and change printf's to dev_err. Additionlly remove the comment that does not make sense.
Signed-off-by: Tim Harvey tharvey@gateworks.com --- v6: new patch
drivers/phy/phy-imx8mq-usb.c | 33 +++++++++++++++------------------ 1 file changed, 15 insertions(+), 18 deletions(-)
diff --git a/drivers/phy/phy-imx8mq-usb.c b/drivers/phy/phy-imx8mq-usb.c index 0ab7965df2ff..bf9b0b6f3450 100644 --- a/drivers/phy/phy-imx8mq-usb.c +++ b/drivers/phy/phy-imx8mq-usb.c @@ -78,9 +78,7 @@ enum imx8mpq_phy_type { };
struct imx8mq_usb_phy { -#if CONFIG_IS_ENABLED(CLK) struct clk phy_clk; -#endif void __iomem *base; enum imx8mpq_phy_type type; struct udevice *vbus_supply; @@ -178,13 +176,13 @@ static int imx8mq_usb_phy_power_on(struct phy *usb_phy) u32 value; int ret;
-#if CONFIG_IS_ENABLED(CLK) - ret = clk_enable(&imx_phy->phy_clk); - if (ret) { - printf("Failed to enable usb phy clock\n"); - return ret; + if (CONFIG_IS_ENABLED(CLK)) { + ret = clk_enable(&imx_phy->phy_clk); + if (ret) { + dev_err(dev, "Failed to enable usb phy clock: %d\n", ret); + return ret; + } } -#endif
if (CONFIG_IS_ENABLED(DM_REGULATOR) && imx_phy->vbus_supply) { ret = regulator_set_enable_if_allowed(imx_phy->vbus_supply, true); @@ -218,9 +216,8 @@ static int imx8mq_usb_phy_power_off(struct phy *usb_phy) value |= PHY_CTRL6_RXTERM_OVERRIDE_SEL; writel(value, imx_phy->base + PHY_CTRL6);
-#if CONFIG_IS_ENABLED(CLK) - clk_disable(&imx_phy->phy_clk); -#endif + if (CONFIG_IS_ENABLED(CLK)) + clk_disable(&imx_phy->phy_clk);
if (CONFIG_IS_ENABLED(DM_REGULATOR) && imx_phy->vbus_supply) { ret = regulator_set_enable_if_allowed(imx_phy->vbus_supply, false); @@ -256,14 +253,14 @@ int imx8mq_usb_phy_probe(struct udevice *dev) if (!priv->base) return -EINVAL;
-#if CONFIG_IS_ENABLED(CLK) - /* Assigned clock already set clock */ - ret = clk_get_by_name(dev, "phy", &priv->phy_clk); - if (ret) { - printf("Failed to get usb phy clock\n"); - return ret; + if (CONFIG_IS_ENABLED(CLK)) { + ret = clk_get_by_name(dev, "phy", &priv->phy_clk); + if (ret) { + dev_err(dev, "Failed to get usb phy clock %d\n", ret); + return ret; + } } -#endif + if (CONFIG_IS_ENABLED(DM_REGULATOR)) { ret = device_get_supply_regulator(dev, "vbus-supply", &priv->vbus_supply);