On Mon, 2021-08-30 at 17:10 +0200, Marek Vasut wrote:
On 8/30/21 5:05 PM, Marcel Ziswiler wrote:
On Mon, 2021-08-30 at 14:18 +0200, Marek Vasut wrote:
On 8/30/21 1:11 PM, Oleksandr Suvorov wrote:
On Sun, Aug 29, 2021 at 10:55 PM Marek Vasut marex@denx.de wrote:
On 8/29/21 9:39 PM, Oleksandr Suvorov wrote:
The BSP platform LmP supports the board NXP iMX8QM MEK. The kernel size in LmP exceeds 32Mb. Increase the maximum size of an uncompressed kernel to fix the following error: Uncompressing Kernel Image Error: inflate() returned -5 Image too large: increase CONFIG_SYS_BOOTM_LEN Must RESET board to recover
Maybe we should increase the default for arm64 instead ? 8 MiB is too small.
I completely agree if NXP doesn't have objections. @Peng Fan Do you mind?
Increase it for all of arm64 , or all of U-Boot even. This has nothing to do with NXP.
In general, I agree. However, in practice this can have devastating effects on stuff as discussed here:
I suspect the correct solution for that is to use bootm_size and let U-Boot figure out where to place the kernel / DT / etc.
Sure, but how would that work with FIT images e.g. containing kernel binary, device tree(s) and an initrd?