Hi Pali,
On 3/23/22 14:18, Pali Rohár wrote:
Commit 0934dddc6436 ("arm: a37xx: Update DTS files to version from upstream Linux kernel") ported Linux's device-tree files for Armada 3720 SOCs. This broke SPI support on some Espressobin boards and results in following U-Boot error:
Loading Environment from SPIFlash... jedec_spi_nor flash@0: unrecognized JEDEC id bytes: f7, 30, 0b *** Warning - spi_flash_probe_bus_cs() failed, using default environment
Before that commit DT node for SPI was called 'spi-flash@0' and after that commit it is called 'flash@0'. Before that commit 'spi-max-frequency' was set to 50000000 and after it is 104000000.
Rename DT node 'spi-flash@0 in armada-3720-espressobin-u-boot.dtsi to 'flash@0' and set custom U-Boot 'spi-max-frequency' back to 50000000.
With this change SPI is working on Espressobin again and it is detected with JEDEC ids ef, 60, 16 on our tested unit.
Loading Environment from SPIFlash... SF: Detected w25q32dw with page size 256 Bytes, erase size 4 KiB, total 4 MiB OK
Note that it is unknown why spi-max-frequency with value 104000000 does not work in U-Boot as it works fine with Linux kernel. Also note that in defconfig file configs/mvebu_espressobin-88f3720_defconfig is set option CONFIG_SF_DEFAULT_SPEED=40000000 which is different value than in DT.
Fixes: 0934dddc6436 ("arm: a37xx: Update DTS files to version from upstream Linux kernel") Signed-off-by: Pali Rohár pali@kernel.org
Hello Stefan, like with USB3.0 port on Turris MOX, this is SPI regression on Espressobin in U-Boot 2022.04. Could you send this fix to master to have SPI working in U-Boot 2022.04? I do not know what is wrong with SPI frequency and we have different value in defconfig and different value in DTS file and another value in kernel DTS file. So the best for now is to stick with old value which was used in U-Boot.
I have tested also Turris MOX with current U-Boot from master branch and it does not have any issue with SPI, like Espressobin.
arch/arm/dts/armada-3720-espressobin-u-boot.dtsi | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)
Unfortunately this generates problem with other MVEBU targets:
$ make mvebu_crb_cn9130_defconfig # # configuration written to .config # $ make -s -j20 Error: arch/arm/dts/armada-3720-espressobin-u-boot.dtsi:36.1-8 syntax error FATAL ERROR: Unable to parse input tree Check /home/stefan/git/u-boot/u-boot-marvell/arch/arm/dts/.armada-3720-espressobin.dtb.pre.tmp for errors make[2]: *** [scripts/Makefile.lib:337: arch/arm/dts/armada-3720-espressobin.dtb] Error 1 make[1]: *** [dts/Makefile:44: arch-dtbs] Error 2 make: *** [Makefile:1150: dts/dt.dtb] Error 2 make: *** Waiting for unfinished jobs....
Could you please take a look?
Thanks, Stefan
diff --git a/arch/arm/dts/armada-3720-espressobin-u-boot.dtsi b/arch/arm/dts/armada-3720-espressobin-u-boot.dtsi index 3e01c64a4bdb..2ffdc65e9f47 100644 --- a/arch/arm/dts/armada-3720-espressobin-u-boot.dtsi +++ b/arch/arm/dts/armada-3720-espressobin-u-boot.dtsi @@ -1,8 +1,15 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-#ifdef CONFIG_ENV_IS_IN_SPI_FLASH &spi0 {
- spi-flash@0 {
- flash@0 {
/** For some unknown reason U-Boot SPI driver cannot access* SPI-NOR with higher frequency. Linux kernel SPI driver* does not have this problem.*/spi-max-frequency = <50000000>;+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH partitions { compatible = "fixed-partitions"; #address-cells = <1>; @@ -19,8 +26,8 @@ }; }; }; -}; #endif +};
/*
- U-Boot requires to have this eMMC node by default in "okay" status. U-Boot
Viele Grüße, Stefan Roese