On Thu, 2021-09-02 at 14:08 -0300, Fabio Estevam wrote:
Hi Marcel,
On Thu, Aug 26, 2021 at 9:14 AM Marcel Ziswiler marcel@ziswiler.com wrote:
From: Marcel Ziswiler marcel.ziswiler@toradex.com
With the move to using binman to generate SPL aka u-boot-spl-ddr.bin and U-Boot proper aka u-boot.itb every board now covers such configuration in its own U-Boot specific device tree include. Introduce a new common imx8mm-binman.dtsi which covers the common part of that configuration.
The initial patch fixes an issue with intermediate binary naming for the imx8mm-cl-iot-gate. And subsequent patches further clean up that dtsi.
This series is based on Peng's binman conversion of late [1], my Verdin iMX8M Mini target refresh [2], Fabio's generating a single bootable flash.bin again for imx8mm-evk [3], Tim's switching imx8mm_venice to using binman to pack images [4] and Frieder's support for Kontron Electronics i.MX6UL/ULL and i.MX8MM SoMs [5].
This series has been run-time tested on Verdin iMX8M Mini. The other targets were only compile tested.
Please note that for now, I left out the following intricacies of imx8mm-venice-u-boot.dtsi. Not quite sure what exactly those are used for.
The series looks good.
Thanks!
We just need to find a way to not break imx8mm-venice.
Yep, yep. I cleaned that up now and will send a v2 shortly.
BTW: Now with 2021.10 released I hope somebody will pick up all my in-flight patch sets soon (;-p).
Thanks