- add sheevaplug MVSDIO driver support
Signed-off-by: drEagle uboot@doukki.net
board/Marvell/sheevaplug/sheevaplug.c | include/configs/sheevaplug.h |
diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c index 16efe64..2bd2568 100644 --- a/board/Marvell/sheevaplug/sheevaplug.c +++ b/board/Marvell/sheevaplug/sheevaplug.c @@ -28,6 +28,9 @@ #include <asm/arch/kirkwood.h> #include <asm/arch/mpp.h> #include "sheevaplug.h" +#ifdef CONFIG_MRVL_MMC +#include <mrvl_mmc.h> +#endif /* CONFIG_MRVL_MMC */
DECLARE_GLOBAL_DATA_PTR;
@@ -147,3 +150,11 @@ void reset_phy(void) printf("88E1116 Initialized on %s\n", name); } #endif /* CONFIG_RESET_PHY_R */ + +#ifdef CONFIG_MRVL_MMC +int board_mmc_init(bd_t *bis) +{ + mrvl_mmc_initialize(bis); + return 0; +} +#endif /* CONFIG_MRVL_MMC */ diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 83dd8ff..270fd56 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -39,17 +40,24 @@ /* * Commands configuration */
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include <config_cmd_default.h> #define CONFIG_CMD_DHCP #define CONFIG_CMD_ENV #define CONFIG_CMD_MII +#define CONFIG_CMD_MMC #define CONFIG_CMD_NAND #define CONFIG_CMD_PING #define CONFIG_CMD_USB
/* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros @@ -98,17 +138,20 @@ #endif /* CONFIG_CMD_NET */
/* * File system */ #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS #define CONFIG_RBTREE #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS #define CONFIG_CMD_MTDPARTS #define CONFIG_LZO
+/* + * SDIO/MMC Card Configuration + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MRVL_MMC +#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE +#endif /* CONFIG_CMD_MMC */
#endif /* _CONFIG_SHEEVAPLUG_H */