Re: [U-Boot] [PATCH 3/4] OMAP3: twister: add video support

On Thu, Jun 14, 2012 at 10:29:47AM +0200, Stefano Babic wrote:

Signed-off-by: Stefano Babic sbabic@denx.de

[snip]

+static GraphicDevice panel; +static const struct panel_config lcd_cfg = {

• .timing_h = 0x01101d1b, /* Horizontal timing */
• .timing_v = 0x01400b02, /* Vertical timing */
• .pol_freq = 0x00023000, /* Pol Freq */
• .divisor = 0x0001000d, /* 33Mhz Pixel Clock */
• .lcd_size = ((YRES - 1) << 16 | (XRES - 1)),
• .panel_type = 0x01, /* TFT */
• .data_lines = 0x03, /* 24 Bit RGB */
• .load_mode = 0x02 /* Frame Mode */

+};

You need #if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD) type testing here[1] that the mt_ventoux board patch has. Shall I or will you v2? And I'll sanity test this on omap3_beagle tomorrow, but I suspect it's fine :)

[1]: twister.c:50: warning: 'panel' defined but not used