On 27.6.2018 07:14, Vipul Kumar wrote:
This patch fixed the same if/else part error by adding the required source select on the basis of is_pre_src check.
Signed-off-by: Vipul Kumar vipul.kumar@xilinx.com
drivers/clk/clk_zynqmp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/clk_zynqmp.c b/drivers/clk/clk_zynqmp.c index a9e4500..167f3f7 100644 --- a/drivers/clk/clk_zynqmp.c +++ b/drivers/clk/clk_zynqmp.c @@ -103,6 +103,8 @@ static const resource_size_t zynqmp_crl_apb_clkc_base = 0xff5e0020; #define PLLCTRL_BYPASS_SHFT 3 #define PLLCTRL_POST_SRC_SHFT 24 #define PLLCTRL_POST_SRC_MASK (0x7 << PLLCTRL_POST_SRC_SHFT) +#define PLLCTRL_PRE_SRC_SHFT 20 +#define PLLCTRL_PRE_SRC_MASK (0x7 << PLLCTRL_PRE_SRC_SHFT)
#define NUM_MIO_PINS 77 @@ -310,8 +312,8 @@ static ulong zynqmp_clk_get_pll_src(ulong clk_ctrl, u32 src_sel;
if (is_pre_src)
src_sel = (clk_ctrl & PLLCTRL_POST_SRC_MASK) >>PLLCTRL_POST_SRC_SHFT;
src_sel = (clk_ctrl & PLLCTRL_PRE_SRC_MASK) >>PLLCTRL_PRE_SRC_SHFT;
Applied.
Thanks, Michal