From: Ye Li ye.li@nxp.com
Since we use SPEED GRADE fuse to set A55 frequency, remove the set_arm_core_low_drive_clk function which has hard coded frequency. And adjust clock_init called sequence and split it to early and late functions. Set the authen register in early function, because CCF driver checks NS bit. Set bus and core clock in late function, because the fuse read and SoC type/rev depend on ELE.
Reviewed-by: Peng Fan peng.fan@nxp.com Signed-off-by: Ye Li ye.li@nxp.com Signed-off-by: Peng Fan peng.fan@nxp.com --- arch/arm/include/asm/arch-imx9/clock.h | 3 ++- arch/arm/mach-imx/imx9/clock.c | 22 ++++++++++++++-------- arch/arm/mach-imx/imx9/soc.c | 2 +- board/freescale/imx93_evk/spl.c | 4 +++- board/phytec/phycore_imx93/spl.c | 2 +- 5 files changed, 21 insertions(+), 12 deletions(-)
diff --git a/arch/arm/include/asm/arch-imx9/clock.h b/arch/arm/include/asm/arch-imx9/clock.h index 1ce6ac4c3a8..76f12118592 100644 --- a/arch/arm/include/asm/arch-imx9/clock.h +++ b/arch/arm/include/asm/arch-imx9/clock.h @@ -211,7 +211,8 @@ struct imx_clk_setting { u32 div; };
-int clock_init(void); +int clock_init_early(void); +int clock_init_late(void); u32 get_clk_src_rate(enum ccm_clk_src source); u32 get_lpuart_clk(void); void init_uart_clk(u32 index); diff --git a/arch/arm/mach-imx/imx9/clock.c b/arch/arm/mach-imx/imx9/clock.c index 1433e68874d..76d19f1cba3 100644 --- a/arch/arm/mach-imx/imx9/clock.c +++ b/arch/arm/mach-imx/imx9/clock.c @@ -782,17 +782,10 @@ void bus_clock_init(void) } }
-int clock_init(void) +int clock_init_early(void) { int i;
- if (is_voltage_mode(VOLT_LOW_DRIVE)) { - bus_clock_init_low_drive(); - set_arm_clk(MHZ(900)); - } else { - bus_clock_init(); - } - /* allow for non-secure access */ for (i = 0; i < OSCPLL_END; i++) ccm_clk_src_tz_access(i, true, false, false); @@ -809,6 +802,19 @@ int clock_init(void) return 0; }
+/* Set bus and A55 core clock per voltage mode */ +int clock_init_late(void) +{ + if (is_voltage_mode(VOLT_LOW_DRIVE)) { + bus_clock_init_low_drive(); + set_arm_core_max_clk(); + } else { + bus_clock_init(); + } + + return 0; +} + int set_clk_eqos(enum enet_freq type) { u32 eqos_post_div; diff --git a/arch/arm/mach-imx/imx9/soc.c b/arch/arm/mach-imx/imx9/soc.c index 331c73675ff..112773f98f6 100644 --- a/arch/arm/mach-imx/imx9/soc.c +++ b/arch/arm/mach-imx/imx9/soc.c @@ -741,7 +741,7 @@ int arch_cpu_init(void) /* Disable wdog */ init_wdog();
- clock_init(); + clock_init_early();
trdc_early_init();
diff --git a/board/freescale/imx93_evk/spl.c b/board/freescale/imx93_evk/spl.c index e4999baa95f..2ad7489ada7 100644 --- a/board/freescale/imx93_evk/spl.c +++ b/board/freescale/imx93_evk/spl.c @@ -123,9 +123,11 @@ void board_init_f(ulong dummy) debug("LC: 0x%x\n", gd->arch.lifecycle); }
+ clock_init_late(); + power_init_board();
- if (!IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE)) + if (!is_voltage_mode(VOLT_LOW_DRIVE)) set_arm_clk(get_cpu_speed_grade_hz());
/* Init power of mix */ diff --git a/board/phytec/phycore_imx93/spl.c b/board/phytec/phycore_imx93/spl.c index 5efa38a1442..17a8736c73f 100644 --- a/board/phytec/phycore_imx93/spl.c +++ b/board/phytec/phycore_imx93/spl.c @@ -130,7 +130,7 @@ void board_init_f(ulong dummy) debug("LC: 0x%x\n", gd->arch.lifecycle); }
- clock_init(); + clock_init_late();
power_init_board();