On Thursday, November 19, 2015 at 10:35:39 PM, dinguyen@opensource.altera.com wrote:
Hi!
[...]
+/* Input buffer enable */ +#define INPUT_BUF_DISABLE (0) +#define INPUT_BUF_1P8V (1) +#define INPUT_BUF_2P5V3V (2)
You can drop those parenthesis around the number
+/* Weak pull up enable */ +#define WK_PU_DISABLE (0) +#define WK_PU_ENABLE (1)
+/* Pull up slew rate control */ +#define PU_SLW_RT_SLOW (0) +#define PU_SLW_RT_FAST (1) +#define PU_SLW_RT_DEFAULT PU_SLW_RT_SLOW
+/* Pull down slew rate control */ +#define PD_SLW_RT_SLOW (0) +#define PD_SLW_RT_FAST (1) +#define PD_SLW_RT_DEFAULT PD_SLW_RT_SLOW
+/* Drive strength control */ +#define PU_DRV_STRG_DEFAULT (0x10) +#define PD_DRV_STRG_DEFAULT (0x10)
+/* bit position */ +#define PD_DRV_STRG_LSB (0) +#define PD_SLW_RT_LSB (5) +#define PU_DRV_STRG_LSB (8) +#define PU_SLW_RT_LSB (13) +#define WK_PU_LSB (16) +#define INPUT_BUF_LSB (17) +#define BIAS_TRIM_LSB (19) +#define VOLTAGE_SEL_LSB (0)
+#define ALT_SYSMGR_NOC_H2F_SET_MSK 0x00000001 +#define ALT_SYSMGR_NOC_LWH2F_SET_MSK 0x00000010 +#define ALT_SYSMGR_NOC_F2H_SET_MSK 0x00000100 +#define ALT_SYSMGR_NOC_F2SDR0_SET_MSK 0x00010000 +#define ALT_SYSMGR_NOC_F2SDR1_SET_MSK 0x00100000 +#define ALT_SYSMGR_NOC_F2SDR2_SET_MSK 0x01000000 +#define ALT_SYSMGR_NOC_TMO_EN_SET_MSK 0x00000001
+#define ALT_SYSMGR_ECC_INTSTAT_SERR_OCRAM_SET_MSK 0x00000002 +#define ALT_SYSMGR_ECC_INTSTAT_DERR_OCRAM_SET_MSK 0x00000002
+#define SYSMGR_A10_SDMMC_CTRL_SET(smplsel, drvsel) \
- ((drvsel << 0) & 0x7) | ((smplsel << 4) & 0x70)
You should use parenthesis around the variables in the macro.
+#endif /* _SOCFPGA_SYSTEM_MANAGER_A10_H_ */