Hi Steve,
You could get the configuration files from Abatron (ftp://83.125.32.26/bdigdb/config/powerpc/mpc83xx/). That should be enough to just flash the board.
Cheers, Emil.
This e-mail, and any associated attachments have been classified as: ==================================================================== [x] Public [ ] Freescale Semiconductor Internal Use Only [ ] Freescale Semiconductor Confidential Proprietary
-----Original Message----- From: u-boot-users-bounces@lists.sourceforge.net [mailto:u-boot-users-bounces@lists.sourceforge.net] On Behalf Of Steven Hein Sent: Friday, February 09, 2007 4:06 PM To: u-boot-users@lists.sourceforge.net Subject: [U-Boot-Users] BDI2000 config for MPC8360rev2 with DDR2 memory?
Hi all--
I just received a new custom board with an MPC8360r2 with 128MB DDR2 memory on the board. My 8360EMDS board has a rev 1.2 part with DDR, so I know I need a different set of init registers in my BDI2000 config. If anyone has a similar config and could send me a BDI2000 config file for it, that would be AWESOME! In the mean time, I'm trying to flash u-boot directly into my flash part using the BDI2000 and let it initialize my memory for me. But this is all fairly uncharted territory for me, so a BDI config would be helpful.
Thanks! Steve