In message 47F3F98010FF784EBEE6526EAAB078D1024F8826@tq-mailsrv.tq-net.de you wrote:
Please pull the following patches from our u-boot-tq-group custodian = tree.
Mostly done.
The following changes since commit = 41be969f4957115ed7b1fe8b890bfaee99d7a7a2: Wolfgang Denk (1): Release v1.3.1
are available in the git repository at:
git://www.denx.de/git/u-boot-tq-group.git master
Jens Gehrlein (3): TQM860M: Support for 10col SDRAMs, max. 128 MiB TQM885D: fix SDRAM refresh TQM885D: Exchanged SDRAM timing by a more relaxed timing.
Martin Krause (5): TQM885D: use calculated cpuclk instead of measuring it TQM885D: adjust for doubled flash sector size + some minor fixes TQM8xx: use the CFI flash driver on all TQM8xx boards TQM5200: Enable multi serial console feature on the STK52xx base board
Omitted this one.
Some configuration updates for the TQM5200 based TB5200 board:
I excluded commit ID 15fa1b84 ("TQM5200: Enable multi serial console feature on the STK52xx base board") because I think that this:
+#if defined (CONFIG_SERIAL_MULTI) + printf (" LEDs 0-3 are not usable with the CONFIG_SERIAL_MULTI\n" \ + " configuration, because the pins PSC3_0-3 are used as\n" \ + " 'serial1' console\n"); +#else
should be part of the user documentation and not part of the code. Please don't make U-Boot more loquaciously than necessary.
Please clean up and resubmit.
Best regards,
Wolfgang Denk