On 7/24/21 5:10 PM, Ashok Reddy Soma wrote:
Since set_control_reg is available in sdhci.c, use it and remove arasan_sdhci_set_control_reg().
Signed-off-by: Ashok Reddy Soma ashok.reddy.soma@xilinx.com
Reviewed-by: Jaehoon Chung jh80.chung@samsung.com
Best Regards, Jaehoon Chung
drivers/mmc/zynq_sdhci.c | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-)
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index a192f60320..93d453a284 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -600,29 +600,10 @@ static void arasan_dt_parse_clk_phases(struct udevice *dev) "clk-phase-mmc-hs400"); }
-static void arasan_sdhci_set_control_reg(struct sdhci_host *host) -{
- struct mmc *mmc = (struct mmc *)host->mmc;
- u32 reg;
- if (!IS_SD(mmc))
return;- if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);reg |= SDHCI_CTRL_VDD_180;sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);- }
- if (mmc->selected_mode > SD_HS &&
mmc->selected_mode <= MMC_HS_200)sdhci_set_uhs_timing(host);-}
static const struct sdhci_ops arasan_ops = { .platform_execute_tuning = &arasan_sdhci_execute_tuning, .set_delay = &arasan_sdhci_set_tapdelay,
- .set_control_reg = &arasan_sdhci_set_control_reg,
- .set_control_reg = &sdhci_set_control_reg,
}; #endif