Wolfgang Denk wd@denx.de wrote：
Add "make RPXlite_DW_16MB" to support your board.
No, please don't. It is trivial (less than 15 lines of code) to support both 8 and 9 column SDRAM chips with the same configuration, so instead of littering the Makefile with countless configurations all the boards will be able to run the same U-Boot image. I already poointed out how to do this.
Sorry for this misleading advice I did. OK, just do the port in your way. But first thing is to port right on 16MB RPXlite DW board. For Rapha's port convenience, I list the ported RPXlite DW hardware configuration.
CPU: MPC823e FLASH: 4×AM29DL323DB90VI 4×4MB=16MB 4×8bit SDRAM: 2×MT48LC16M16A2-75 2×32MB=64MB 2×16bit
you just need add a CONFIG_RPXLITE_16MB macro in
Don't. I will reject any such patches. Do it the Right Way (TM).
OK, fine. Be more professional. I do agree:-)
===== Best regards,
Sam
_________________________________________________________ Do You Yahoo!? 150万曲MP3疯狂搜，带您闯入音乐殿堂 http://music.yisou.com/ 美女明星应有尽有，搜遍美图、艳图和酷图 http://image.yisou.com 1G就是1000兆，雅虎电邮自助扩容！ http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_1...