Previously boards used a variety of indentations, newline styles, and colon styles for the PCI information that is printed on bootup. This patch unifies the style to look like:
... NAND: 1024 MiB PCIE1: connected as Root Complex Scanning PCI bus 01 04 01 8086 1010 0200 00 04 01 8086 1010 0200 00 03 00 10b5 8112 0604 00 02 01 10b5 8518 0604 00 02 02 10b5 8518 0604 00 08 00 1957 0040 0b20 00 07 00 10b5 8518 0604 00 09 00 10b5 8112 0604 00 07 01 10b5 8518 0604 00 07 02 10b5 8518 0604 00 06 00 10b5 8518 0604 00 02 03 10b5 8518 0604 00 01 00 10b5 8518 0604 00 PCIE1: Bus 00 - 0b PCIE2: connected as Root Complex Scanning PCI bus 0d 0d 00 1957 0040 0b20 00 PCIE2: Bus 0c - 0d In: serial ...
Signed-off-by: Peter Tyser ptyser@xes-inc.com CC: wd@denx.de CC: sr@denx.de CC: galak@kernel.crashing.org --- This series assumes "fsl_pci_init: Make fsl_pci_init_port() PCI/PCIe aware" has already been applied.
board/atum8548/atum8548.c | 12 ++++++------ board/freescale/corenet_ds/pci.c | 16 ++++++++-------- board/freescale/mpc8536ds/mpc8536ds.c | 16 ++++++++-------- board/freescale/mpc8540ads/mpc8540ads.c | 4 ++-- board/freescale/mpc8541cds/mpc8541cds.c | 6 +++--- board/freescale/mpc8544ds/mpc8544ds.c | 24 ++++++++++++------------ board/freescale/mpc8548cds/mpc8548cds.c | 16 ++++++++-------- board/freescale/mpc8555cds/mpc8555cds.c | 6 +++--- board/freescale/mpc8560ads/mpc8560ads.c | 4 ++-- board/freescale/mpc8568mds/mpc8568mds.c | 8 ++++---- board/freescale/mpc8569mds/mpc8569mds.c | 8 ++++---- board/freescale/mpc8572ds/mpc8572ds.c | 20 ++++++++++---------- board/freescale/mpc8610hpcd/mpc8610hpcd.c | 20 ++++++++++---------- board/freescale/mpc8641hpcn/mpc8641hpcn.c | 18 +++++++++--------- board/freescale/p1022ds/p1022ds.c | 8 ++++---- board/freescale/p1_p2_rdb/pci.c | 16 ++++++++-------- board/freescale/p2020ds/p2020ds.c | 24 ++++++++++++------------ board/pm854/pm854.c | 4 ++-- board/pm856/pm856.c | 4 ++-- board/sbc8548/sbc8548.c | 8 ++++---- board/sbc8641d/sbc8641d.c | 18 +++++++++--------- board/tqc/tqm85xx/tqm85xx.c | 8 ++++---- board/xes/common/fsl_8xxx_pci.c | 16 ++++++++-------- drivers/pci/fsl_pci_init.c | 10 +++++----- 24 files changed, 147 insertions(+), 147 deletions(-)
diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c index 671f9e9..4fcbb18 100644 --- a/board/atum8548/atum8548.c +++ b/board/atum8548/atum8548.c @@ -218,14 +218,14 @@ void pci_init_board(void)
pcie1_hose.region_count = 1; #endif - printf (" PCIE1 connected to Slot as %s (base addr %lx)\n", + printf ("PCIE1: connected to Slot as %s (base addr %lx)\n", pcie_ep ? "Endpoint" : "Root Complex", pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); } else { - printf (" PCIE1: disabled\n"); + printf("PCIE1: disabled\n"); }
puts("\n"); @@ -242,7 +242,7 @@ void pci_init_board(void) if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { SET_STD_PCI_INFO(pci_info[num], 1); pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs); - printf ("\n PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", + printf("PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", (pci_32) ? 32 : 64, (pci_speed == 33333000) ? "33" : (pci_speed == 66666000) ? "66" : "unknown", @@ -254,7 +254,7 @@ void pci_init_board(void) first_free_busno = fsl_pci_init_port(&pci_info[num++], &pci1_hose, first_free_busno); } else { - printf (" PCI: disabled\n"); + printf("PCI1: disabled\n"); }
puts("\n"); @@ -267,11 +267,11 @@ void pci_init_board(void) SET_STD_PCI_INFO(pci_info[num], 2); pci_agent = fsl_setup_hose(&pci2_hose, pci_info[num].regs);
- puts (" PCI2\n"); + puts("PCI2\n"); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pci1_hose, first_free_busno); } else { - printf (" PCI2: disabled\n"); + printf("PCI2: disabled\n"); } puts("\n"); #else diff --git a/board/freescale/corenet_ds/pci.c b/board/freescale/corenet_ds/pci.c index e1bca19..775b623 100644 --- a/board/freescale/corenet_ds/pci.c +++ b/board/freescale/corenet_ds/pci.c @@ -68,13 +68,13 @@ void pci_init_board(void) LAW_TRGT_IF_PCIE_1); SET_STD_PCIE_INFO(pci_info[num], 1); pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf(" PCIE1 connected to Slot 1 as %s (base addr %lx)\n", + printf("PCIE1: connected to Slot 1 as %s (base addr %lx)\n", pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); } else { - printf (" PCIE1: disabled\n"); + printf("PCIE1: disabled\n"); } #else setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE1); /* disable */ @@ -90,13 +90,13 @@ void pci_init_board(void) LAW_TRGT_IF_PCIE_2); SET_STD_PCIE_INFO(pci_info[num], 2); pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf(" PCIE2 connected to Slot 3 as %s (base addr %lx)\n", + printf("PCIE2: connected to Slot 3 as %s (base addr %lx)\n", pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie2_hose, first_free_busno); } else { - printf (" PCIE2: disabled\n"); + printf("PCIE2: disabled\n"); } #else setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE2); /* disable */ @@ -112,13 +112,13 @@ void pci_init_board(void) LAW_TRGT_IF_PCIE_3); SET_STD_PCIE_INFO(pci_info[num], 3); pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); - printf(" PCIE3 connected to Slot 2 as %s (base addr %lx)\n", + printf("PCIE3: connected to Slot 2 as %s (base addr %lx)\n", pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie3_hose, first_free_busno); } else { - printf (" PCIE3: disabled\n"); + printf("PCIE3: disabled\n"); } #else setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE3); /* disable */ @@ -134,13 +134,13 @@ void pci_init_board(void) LAW_TRGT_IF_PCIE_4); SET_STD_PCIE_INFO(pci_info[num], 4); pcie_ep = fsl_setup_hose(&pcie4_hose, pci_info[num].regs); - printf(" PCIE4 connected to as %s (base addr %lx)\n", + printf("PCIE4: connected to as %s (base addr %lx)\n", pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie4_hose, first_free_busno); } else { - printf (" PCIE4: disabled\n"); + printf("PCIE4: disabled\n"); } #else setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE4); /* disable */ diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index c8e0856..8ad7549 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -229,13 +229,13 @@ void pci_init_board(void) LAW_TRGT_IF_PCIE_3); SET_STD_PCIE_INFO(pci_info[num], 3); pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); - printf (" PCIE3 connected to Slot3 as %s (base address %lx)\n", + printf("PCIE3: connected to Slot3 as %s (base address %lx)\n", pcie_ep ? "Endpoint" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie3_hose, first_free_busno); } else { - printf (" PCIE3: disabled\n"); + printf("PCIE3: disabled\n"); }
puts("\n"); @@ -253,13 +253,13 @@ void pci_init_board(void) LAW_TRGT_IF_PCIE_1); SET_STD_PCIE_INFO(pci_info[num], 1); pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf (" PCIE1 connected to Slot1 as %s (base address %lx)\n", + printf("PCIE1: connected to Slot1 as %s (base address %lx)\n", pcie_ep ? "Endpoint" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); } else { - printf (" PCIE1: disabled\n"); + printf("PCIE1: disabled\n"); }
puts("\n"); @@ -277,13 +277,13 @@ void pci_init_board(void) LAW_TRGT_IF_PCIE_2); SET_STD_PCIE_INFO(pci_info[num], 2); pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf (" PCIE2 connected to Slot 2 as %s (base address %lx)\n", + printf("PCIE2: connected to Slot 2 as %s (base address %lx)\n", pcie_ep ? "Endpoint" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie2_hose, first_free_busno); } else { - printf (" PCIE2: disabled\n"); + printf("PCIE2: disabled\n"); }
puts("\n"); @@ -304,7 +304,7 @@ void pci_init_board(void) LAW_TRGT_IF_PCI); SET_STD_PCI_INFO(pci_info[num], 1); pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs); - printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", + printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", (pci_32) ? 32 : 64, (pci_speed == 33333000) ? "33" : (pci_speed == 66666000) ? "66" : "unknown", @@ -316,7 +316,7 @@ void pci_init_board(void) first_free_busno = fsl_pci_init_port(&pci_info[num++], &pci1_hose, first_free_busno); } else { - printf (" PCI: disabled\n"); + printf("PCI: disabled\n"); }
puts("\n"); diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index f9ff827..d354a26 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -47,10 +47,10 @@ int checkboard (void) puts("Board: ADS\n");
#ifdef CONFIG_PCI - printf(" PCI1: 32 bit, %d MHz (compiled)\n", + printf("PCI1: 32 bit, %d MHz (compiled)\n", CONFIG_SYS_CLK_FREQ / 1000000); #else - printf(" PCI1: disabled\n"); + printf("PCI1: disabled\n"); #endif
/* diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c index 0580fe7..59ec604 100644 --- a/board/freescale/mpc8541cds/mpc8541cds.c +++ b/board/freescale/mpc8541cds/mpc8541cds.c @@ -221,17 +221,17 @@ int checkboard (void) MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev), MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
- printf (" PCI1: %d bit, %s MHz, %s\n", + printf("PCI1: %d bit, %s MHz, %s\n", (pci1_32) ? 32 : 64, (pci1_speed == 33000000) ? "33" : (pci1_speed == 66000000) ? "66" : "unknown", pci1_clk_sel ? "sync" : "async");
if (pci_dual) { - printf (" PCI2: 32 bit, 66 MHz, %s\n", + printf("PCI2: 32 bit, 66 MHz, %s\n", pci2_clk_sel ? "sync" : "async"); } else { - printf (" PCI2: disabled\n"); + printf("PCI2: disabled\n"); }
/* diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index da3a2b6..3bbf0c2 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -142,9 +142,9 @@ void pci_init_board(void)
pcie3_hose.region_count = 1; #endif - printf (" PCIE3 connected to ULI as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE3: connected to ULI as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie3_hose, first_free_busno);
@@ -154,7 +154,7 @@ void pci_init_board(void) */ in_be32((u32 *)CONFIG_SYS_PCIE3_MEM_BUS); } else { - printf (" PCIE3: disabled\n"); + printf("PCIE3: disabled\n"); } puts("\n"); #else @@ -177,14 +177,14 @@ void pci_init_board(void)
pcie1_hose.region_count = 1; #endif - printf (" PCIE1 connected to Slot 2 as %s (base addr %lx)\n", + printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n", pcie_ep ? "Endpoint" : "Root Complex", pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); } else { - printf (" PCIE1: disabled\n"); + printf("PCIE1: disabled\n"); }
puts("\n"); @@ -208,13 +208,13 @@ void pci_init_board(void)
pcie2_hose.region_count = 1; #endif - printf (" PCIE2 connected to Slot 1 as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie2_hose, first_free_busno); } else { - printf (" PCIE2: disabled\n"); + printf("PCIE2: disabled\n"); }
puts("\n"); @@ -231,7 +231,7 @@ void pci_init_board(void) if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { SET_STD_PCI_INFO(pci_info[num], 1); pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs); - printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", + printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", (pci_32) ? 32 : 64, (pci_speed == 33333000) ? "33" : (pci_speed == 66666000) ? "66" : "unknown", @@ -243,7 +243,7 @@ void pci_init_board(void) first_free_busno = fsl_pci_init_port(&pci_info[num++], &pci1_hose, first_free_busno); } else { - printf (" PCI: disabled\n"); + printf("PCI: disabled\n"); }
puts("\n"); diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index 23e552b..14c902c 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -284,7 +284,7 @@ void pci_init_board(void) if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { SET_STD_PCI_INFO(pci_info[num], 1); pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs); - printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", + printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", (pci_32) ? 32 : 64, (pci_speed == 33333000) ? "33" : (pci_speed == 66666000) ? "66" : "unknown", @@ -308,7 +308,7 @@ void pci_init_board(void) } #endif } else { - printf (" PCI: disabled\n"); + printf("PCI: disabled\n"); }
puts("\n"); @@ -321,10 +321,10 @@ void pci_init_board(void) uint pci2_clk_sel = porpllsr & 0x4000; /* PORPLLSR[17] */ uint pci_dual = get_pci_dual (); /* PCI DUAL in CM_PCI[3] */ if (pci_dual) { - printf (" PCI2: 32 bit, 66 MHz, %s\n", + printf("PCI2: 32 bit, 66 MHz, %s\n", pci2_clk_sel ? "sync" : "async"); } else { - printf (" PCI2: disabled\n"); + printf("PCI2: disabled\n"); } } #else @@ -337,14 +337,14 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ SET_STD_PCIE_INFO(pci_info[num], 1); pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf (" PCIE1 connected to Slot as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE1: connected to Slot as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); } else { - printf (" PCIE1: disabled\n"); + printf("PCIE1: disabled\n"); }
puts("\n"); diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c index b7e0e0c..edaba26 100644 --- a/board/freescale/mpc8555cds/mpc8555cds.c +++ b/board/freescale/mpc8555cds/mpc8555cds.c @@ -219,17 +219,17 @@ int checkboard (void) MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev), MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
- printf (" PCI1: %d bit, %s MHz, %s\n", + printf("PCI1: %d bit, %s MHz, %s\n", (pci1_32) ? 32 : 64, (pci1_speed == 33000000) ? "33" : (pci1_speed == 66000000) ? "66" : "unknown", pci1_clk_sel ? "sync" : "async");
if (pci_dual) { - printf (" PCI2: 32 bit, 66 MHz, %s\n", + printf("PCI2: 32 bit, 66 MHz, %s\n", pci2_clk_sel ? "sync" : "async"); } else { - printf (" PCI2: disabled\n"); + printf("PCI2: disabled\n"); }
/* diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index 423e9d7..1761431 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -252,10 +252,10 @@ int checkboard (void) puts("Board: ADS\n");
#ifdef CONFIG_PCI - printf(" PCI1: 32 bit, %d MHz (compiled)\n", + printf("PCI1: 32 bit, %d MHz (compiled)\n", CONFIG_SYS_CLK_FREQ / 1000000); #else - printf(" PCI1: disabled\n"); + printf("PCI1: disabled\n"); #endif
/* diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index bd859e4..d74fcac 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -378,7 +378,7 @@ void pci_init_board(void) if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { SET_STD_PCI_INFO(pci_info[num], 1); pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs); - printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", + printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", (pci_32) ? 32 : 64, (pci_speed == 33333000) ? "33" : (pci_speed == 66666000) ? "66" : "unknown", @@ -390,7 +390,7 @@ void pci_init_board(void) first_free_busno = fsl_pci_init_port(&pci_info[num++], &pci1_hose, first_free_busno); } else { - printf (" PCI: disabled\n"); + printf("PCI: disabled\n"); }
puts("\n"); @@ -404,14 +404,14 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ SET_STD_PCIE_INFO(pci_info[num], 1); pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf (" PCIE1 connected to Slot as %s (base addr %lx)\n", + printf("PCIE1: connected to Slot as %s (base addr %lx)\n", pcie_ep ? "Endpoint" : "Root Complex", pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); } else { - printf (" PCIE1: disabled\n"); + printf("PCIE1: disabled\n"); }
puts("\n"); diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index 743e712..dc0884e 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -584,13 +584,13 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ SET_STD_PCIE_INFO(pci_info[num], 1); pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf (" PCIE1 connected to Slot as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE1: connected to Slot as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); } else { - printf (" PCIE1: disabled\n"); + printf("PCIE1: disabled\n"); }
puts("\n"); diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 6b96dfc..2125274 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -192,9 +192,9 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){ SET_STD_PCIE_INFO(pci_info[num], 3); pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); - printf (" PCIE3 connected to ULI as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE3: connected to ULI as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie3_hose, first_free_busno); /* @@ -211,7 +211,7 @@ void pci_init_board(void) in_be32(p); } } else { - printf (" PCIE3: disabled\n"); + printf("PCIE3: disabled\n"); } puts("\n"); #else @@ -224,13 +224,13 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){ SET_STD_PCIE_INFO(pci_info[num], 2); pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf (" PCIE2 connected to Slot 1 as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie2_hose, first_free_busno); } else { - printf (" PCIE2: disabled\n"); + printf("PCIE2: disabled\n"); }
puts("\n"); @@ -244,13 +244,13 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ SET_STD_PCIE_INFO(pci_info[num], 1); pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf (" PCIE1 connected to Slot 2 as %s (base addr %lx)\n", + printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n", pcie_ep ? "Endpoint" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); } else { - printf (" PCIE1: disabled\n"); + printf("PCIE1: disabled\n"); }
puts("\n"); diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index f67f3e3..61a635d 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -244,14 +244,14 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)){ SET_STD_PCIE_INFO(pci_info[num], 1); pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf (" PCIE1 connected to ULI as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE1: connected to ULI as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); } else { - printf (" PCIE1: disabled\n"); + printf("PCIE1: disabled\n"); }
puts("\n"); @@ -265,13 +265,13 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)){ SET_STD_PCIE_INFO(pci_info[num], 2); pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf (" PCIE2 connected to Slot as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE2: connected to Slot as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie2_hose, first_free_busno); } else { - printf (" PCIE2: disabled\n"); + printf("PCIE2: disabled\n"); }
puts("\n"); @@ -283,14 +283,14 @@ void pci_init_board(void) if (!(devdisr & MPC86xx_DEVDISR_PCI1)) { SET_STD_PCI_INFO(pci_info[num], 1); pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs); - printf(" PCI connected to PCI slots as %s" \ + printf("PCI: connected to PCI slots as %s" \ " (base address %lx)\n", pci_agent ? "Agent" : "Host", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pci1_hose, first_free_busno); } else { - printf (" PCI: disabled\n"); + printf("PCI: disabled\n"); }
puts("\n"); diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index 092ead6..812111d 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -157,9 +157,9 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) { SET_STD_PCIE_INFO(pci_info[num], 1); pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf(" PCIE1 connected to ULI as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE1: connected to ULI as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno);
@@ -171,22 +171,22 @@ void pci_init_board(void) + CONFIG_SYS_PCIE1_MEM_SIZE - 0x1000000)));
} else { - puts(" PCIE1: disabled\n"); + puts("PCIE1: disabled\n"); } #else - puts(" PCIE1: disabled\n"); + puts("PCIE1: disabled\n"); #endif /* CONFIG_PCIE1 */
#ifdef CONFIG_PCIE2 SET_STD_PCIE_INFO(pci_info[num], 2); pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf(" PCIE2 connected as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE2: connected as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie2_hose, first_free_busno); #else - puts(" PCIE2: disabled\n"); + puts("PCIE2: disabled\n"); #endif /* CONFIG_PCIE2 */
} diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c index ee93e8b..7cb549b 100644 --- a/board/freescale/p1022ds/p1022ds.c +++ b/board/freescale/p1022ds/p1022ds.c @@ -225,7 +225,7 @@ static void configure_pcie(struct fsl_pci_info *info, set_next_law(info->mem_phys, law_size_bits(info->mem_size), info->law); set_next_law(info->io_phys, law_size_bits(info->io_size), info->law); is_endpoint = fsl_setup_hose(hose, info->regs); - printf(" PCIE%u connected to %s as %s (base addr %lx)\n", + printf("PCIE%u: connected to %s as %s (base addr %lx)\n", info->pci_num, connected, is_endpoint ? "Endpoint" : "Root Complex", info->regs); bus_number = fsl_pci_init_port(info, hose, bus_number); @@ -255,7 +255,7 @@ void pci_init_board(void) SET_STD_PCIE_INFO(pci_info, 1); configure_pcie(&pci_info, &pcie1_hose, serdes_slot_name(PCIE1)); } else { - printf(" PCIE1: disabled\n"); + printf("PCIE1: disabled\n"); } #else setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ @@ -266,7 +266,7 @@ void pci_init_board(void) SET_STD_PCIE_INFO(pci_info, 2); configure_pcie(&pci_info, &pcie2_hose, serdes_slot_name(PCIE2)); } else { - printf(" PCIE2: disabled\n"); + printf("PCIE2: disabled\n"); } #else setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ @@ -277,7 +277,7 @@ void pci_init_board(void) SET_STD_PCIE_INFO(pci_info, 3); configure_pcie(&pci_info, &pcie3_hose, serdes_slot_name(PCIE3)); } else { - printf(" PCIE3: disabled\n"); + printf("PCIE3: disabled\n"); } #else setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */ diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c index 97d4f83..e2ed29c 100644 --- a/board/freescale/p1_p2_rdb/pci.c +++ b/board/freescale/p1_p2_rdb/pci.c @@ -65,13 +65,13 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ SET_STD_PCIE_INFO(pci_info[num], 2); pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf(" PCIE2 connected to Slot 1 as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie2_hose, first_free_busno); } else { - printf (" PCIE2: disabled\n"); + printf("PCIE2: disabled\n"); } puts("\n"); #else @@ -84,13 +84,13 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ SET_STD_PCIE_INFO(pci_info[num], 1); pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf(" PCIE1 connected to Slot 2 as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); } else { - printf (" PCIE1: disabled\n"); + printf("PCIE1: disabled\n"); } puts("\n"); #else diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index 608ff91..f988272 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -218,9 +218,9 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)) { SET_STD_PCIE_INFO(pci_info[num], 2); pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf(" PCIE2 connected to ULI as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE2: connected to ULI as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie2_hose, first_free_busno);
@@ -245,7 +245,7 @@ void pci_init_board(void) } #endif } else { - printf(" PCIE2: disabled\n"); + printf("PCIE2: disabled\n"); } puts("\n"); #else @@ -258,13 +258,13 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)) { SET_STD_PCIE_INFO(pci_info[num], 3); pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); - printf(" PCIE3 connected to Slot 1 as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE3: connected to Slot 1 as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie3_hose, first_free_busno); } else { - printf(" PCIE3: disabled\n"); + printf("PCIE3: disabled\n"); } puts("\n"); #else @@ -277,13 +277,13 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) { SET_STD_PCIE_INFO(pci_info[num], 1); pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf(" PCIE1 connected to Slot 2 as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); } else { - printf(" PCIE1: disabled\n"); + printf("PCIE1: disabled\n"); } puts("\n"); #else diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c index a302b91..0b8ea81 100644 --- a/board/pm854/pm854.c +++ b/board/pm854/pm854.c @@ -59,10 +59,10 @@ int checkboard (void) puts("Board: MicroSys PM854\n");
#ifdef CONFIG_PCI - printf(" PCI1: 32 bit, %d MHz (compiled)\n", + printf("PCI1: 32 bit, %d MHz (compiled)\n", CONFIG_SYS_CLK_FREQ / 1000000); #else - printf(" PCI1: disabled\n"); + printf("PCI1: disabled\n"); #endif
/* diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c index f9d92d9..4e059b0 100644 --- a/board/pm856/pm856.c +++ b/board/pm856/pm856.c @@ -213,10 +213,10 @@ int checkboard (void) puts("Board: MicroSys PM856\n");
#ifdef CONFIG_PCI - printf(" PCI1: 32 bit, %d MHz (compiled)\n", + printf("PCI1: 32 bit, %d MHz (compiled)\n", CONFIG_SYS_CLK_FREQ / 1000000); #else - printf(" PCI1: disabled\n"); + printf("PCI1: disabled\n"); #endif
/* diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 733979c..272428f 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -342,7 +342,7 @@ pci_init_board(void) uint pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; uint pci_speed = CONFIG_SYS_CLK_FREQ; /* get_clock_freq() */
- printf (" PCI host: %d bit, %s MHz, %s, %s\n", + printf("PCI: Host, %d bit, %s MHz, %s, %s\n", (pci_32) ? 32 : 64, (pci_speed == 33000000) ? "33" : (pci_speed == 66000000) ? "66" : "unknown", @@ -353,7 +353,7 @@ pci_init_board(void) first_free_busno = fsl_pci_init_port(&pci_info[num++], &pci1_hose, first_free_busno); } else { - printf (" PCI: disabled\n"); + printf("PCI: disabled\n"); }
puts("\n"); @@ -368,11 +368,11 @@ pci_init_board(void)
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ SET_STD_PCIE_INFO(pci_info[num], 1); - printf (" PCIE at base address %lx\n", pci_info[num].regs); + printf("PCIE: base address %lx\n", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); } else { - printf (" PCIE: disabled\n"); + printf("PCIE: disabled\n"); }
puts("\n"); diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c index d954d2f..5bf2364 100644 --- a/board/sbc8641d/sbc8641d.c +++ b/board/sbc8641d/sbc8641d.c @@ -221,29 +221,29 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) { SET_STD_PCIE_INFO(pci_info[num], 1); pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf(" PCIE1 connected as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE1: connected as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); } else { - puts(" PCIE1: disabled\n"); + puts("PCIE1: disabled\n"); } #else - puts(" PCIE1: disabled\n"); + puts("PCIE1: disabled\n"); #endif /* CONFIG_PCIE1 */
#ifdef CONFIG_PCIE2
SET_STD_PCIE_INFO(pci_info[num], 2); pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf(" PCIE2 connected as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); + printf("PCIE2: connected as %s (base addr %lx)\n", + pcie_ep ? "Endpoint" : "Root Complex", + pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie2_hose, first_free_busno); #else - puts(" PCIE2: disabled\n"); + puts("PCIE2: disabled\n"); #endif /* CONFIG_PCIE2 */ }
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index 2c3885f..362b335 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -567,7 +567,7 @@ void pci_init_board (void) if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { SET_STD_PCI_INFO(pci_info[num], 1); pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs); - printf ("\n PCI1: %d bit, %s MHz, %s, %s, %s\n", + printf("PCI1: %d bit, %s MHz, %s, %s, %s\n", (pci_32) ? 32 : 64, (pci_speed == 33333333) ? "33" : (pci_speed == 66666666) ? "66" : "unknown", @@ -591,7 +591,7 @@ void pci_init_board (void) } #endif } else { - printf(" PCI1: disabled\n"); + printf("PCI1: disabled\n"); } #else setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); @@ -603,12 +603,12 @@ void pci_init_board (void) if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) { SET_STD_PCIE_INFO(pci_info[num], 1); pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf(" PCIE1 connected as %s\n", + printf("PCIE1: connected as %s\n", pcie_ep ? "Endpoint" : "Root Complex"); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); } else { - printf(" PCIE1: disabled\n"); + printf("PCIE1: disabled\n"); } #else setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); diff --git a/board/xes/common/fsl_8xxx_pci.c b/board/xes/common/fsl_8xxx_pci.c index f425cee..4a0965b 100644 --- a/board/xes/common/fsl_8xxx_pci.c +++ b/board/xes/common/fsl_8xxx_pci.c @@ -95,7 +95,7 @@ void pci_init_board(void) if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { SET_STD_PCI_INFO(pci_info[num], 1); pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs); - printf("\n PCI1: %d bit %s, %s %d MHz, %s, %s\n", + printf("PCI1: %d bit %s, %s %d MHz, %s, %s\n", pci_32 ? 32 : 64, pcix ? "PCIX" : "PCI", pci_spd_norm ? ">=" : "<=", @@ -106,7 +106,7 @@ void pci_init_board(void) first_free_busno = fsl_pci_init_port(&pci_info[num++], &pci1_hose, first_free_busno); } else { - printf(" PCI1: disabled\n"); + printf("PCI1: disabled\n"); } #elif defined CONFIG_MPC8548 /* PCI1 not present on MPC8572 */ @@ -119,12 +119,12 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) { SET_STD_PCIE_INFO(pci_info[num], 1); pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf(" PCIE1 connected as %s\n", + printf("PCIE1: connected as %s\n", pcie_ep ? "Endpoint" : "Root Complex"); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie1_hose, first_free_busno); } else { - printf(" PCIE1: disabled\n"); + printf("PCIE1: disabled\n"); } #else setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE1); @@ -136,12 +136,12 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) { SET_STD_PCIE_INFO(pci_info[num], 2); pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf(" PCIE2 connected as %s\n", + printf("PCIE2: connected as %s\n", pcie_ep ? "Endpoint" : "Root Complex"); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie2_hose, first_free_busno); } else { - printf(" PCIE2: disabled\n"); + printf("PCIE2: disabled\n"); } #else setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE2); @@ -153,12 +153,12 @@ void pci_init_board(void) if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) { SET_STD_PCIE_INFO(pci_info[num], 3); pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); - printf(" PCIE3 connected as %s\n", + printf("PCIE3: connected as %s\n", pcie_ep ? "Endpoint" : "Root Complex"); first_free_busno = fsl_pci_init_port(&pci_info[num++], &pcie3_hose, first_free_busno); } else { - printf(" PCIE3: disabled\n"); + printf("PCIE3: disabled\n"); } #else setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE3); diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 45794da..21cbb3b 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -391,11 +391,11 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data) * 1 == pci agent or pcie end-point */ if (!temp8) { - printf(" Scanning PCI bus %02x\n", + printf(" Scanning PCI bus %02x\n", hose->current_busno); hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno); } else { - debug(" Not scanning PCI bus %02x. PI=%x\n", + debug(" Not scanning PCI bus %02x. PI=%x\n", hose->current_busno, temp8); hose->last_busno = hose->current_busno; } @@ -482,9 +482,9 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, }
pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); - printf(" PCI%s%x on bus %02x - %02x\n", pcie_cap == PCI_CAP_ID_EXP ? - "E" : "", pci_info->pci_num, - hose->first_busno, hose->last_busno); + printf("PCI%s%x: Bus %02x - %02x\n", pcie_cap == PCI_CAP_ID_EXP ? + "E" : "", pci_info->pci_num, + hose->first_busno, hose->last_busno);
return(hose->last_busno + 1); }