Due to the introduction of the pinctrl and clk driver, and using device tree files, remove the unneeded hardcoded pin configuration and clock enabling code from the board file.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com ---
Changes in v4: None Changes in v3: None Changes in v2: None
board/atmel/sama5d3_xplained/sama5d3_xplained.c | 34 ------------------------- 1 file changed, 34 deletions(-)
diff --git a/board/atmel/sama5d3_xplained/sama5d3_xplained.c b/board/atmel/sama5d3_xplained/sama5d3_xplained.c index 2b9da91b2d..f2f5506adc 100644 --- a/board/atmel/sama5d3_xplained/sama5d3_xplained.c +++ b/board/atmel/sama5d3_xplained/sama5d3_xplained.c @@ -6,16 +6,12 @@ */
#include <common.h> -#include <mmc.h> #include <asm/io.h> #include <asm/arch/sama5d3_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_rstc.h> #include <asm/arch/gpio.h> #include <asm/arch/clk.h> -#include <atmel_mci.h> -#include <net.h> -#include <netdev.h> #include <spl.h> #include <asm/arch/atmel_mpddrc.h> #include <asm/arch/at91_wdt.h> @@ -65,20 +61,12 @@ static void sama5d3_xplained_usb_hw_init(void) #ifdef CONFIG_GENERIC_ATMEL_MCI static void sama5d3_xplained_mci0_hw_init(void) { - at91_mci_hw_init(); - at91_set_pio_output(AT91_PIO_PORTE, 2, 0); /* MCI0 Power */ } #endif
int board_early_init_f(void) { - at91_periph_clk_enable(ATMEL_ID_PIOA); - at91_periph_clk_enable(ATMEL_ID_PIOB); - at91_periph_clk_enable(ATMEL_ID_PIOC); - at91_periph_clk_enable(ATMEL_ID_PIOD); - at91_periph_clk_enable(ATMEL_ID_PIOE); - at91_seriald_hw_init();
return 0; @@ -98,10 +86,6 @@ int board_init(void) #ifdef CONFIG_GENERIC_ATMEL_MCI sama5d3_xplained_mci0_hw_init(); #endif -#ifdef CONFIG_MACB - at91_gmac_hw_init(); - at91_macb_hw_init(); -#endif return 0; }
@@ -113,24 +97,6 @@ int dram_init(void) return 0; }
-int board_eth_init(bd_t *bis) -{ -#ifdef CONFIG_MACB - macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00); - macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00); -#endif - return 0; -} - -#ifdef CONFIG_GENERIC_ATMEL_MCI -int board_mmc_init(bd_t *bis) -{ - atmel_mci_init((void *)ATMEL_BASE_MCI0); - - return 0; -} -#endif - /* SPL */ #ifdef CONFIG_SPL_BUILD void spl_board_init(void)