Set the active_slave to 1 as slave 1 is pinned out in dra72x base board
Signed-off-by: Mugunthan V N mugunthanvnm@ti.com --- board/ti/dra7xx/evm.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 073d151..955c16f 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -157,6 +157,8 @@ int spl_start_uboot(void) #define VIN2A_D15_DLY_VAL ((0x4 << 5) + 0x0) #define VIN2A_D14_DLY_VAL ((0x4 << 5) + 0x0)
+extern u32 *const omap_si_rev; + static void cpsw_control(int enabled) { /* VTP can be added here */ @@ -183,7 +185,7 @@ static struct cpsw_platform_data cpsw_data = { .mdio_div = 0xff, .channels = 8, .cpdma_reg_ofs = 0x800, - .slaves = 1, + .slaves = 2, .slave_data = cpsw_slaves, .ale_reg_ofs = 0xd00, .ale_entries = 1024, @@ -254,6 +256,9 @@ int board_eth_init(bd_t *bis) ctrl_val |= 0x22; writel(ctrl_val, (*ctrl)->control_core_control_io1);
+ if (*omap_si_rev == DRA722_ES1_0) + cpsw_data.active_slave = 1; + ret = cpsw_register(&cpsw_data); if (ret < 0) printf("Error %d registering CPSW switch\n", ret);