Hello,
I have connected USB hard disk to P1020RB and in command prompt(u-boot) i used command => usb start (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found
=> usb dev
USB device 0: Vendor: Seagate Rev: 0130 Prod: Portable Type: Hard Disk Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)
and USB got detected.
but If i used the same command in our custom board => usb start (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found
=> usb dev
USB device -1: device type unknown
How do resolve this issue and why the device is not detecting my USB hard disk.?
manukumar signal-networks