Pull common.c into common subdirectory of the board file, since this code can be reused by other Data Modul SBCs. Drop the include of lpddr4_timing.h, which is unneeded.
Signed-off-by: Marek Vasut marex@denx.de --- Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de --- board/data_modul/common/common.c | 194 ++++++++++++++++++ board/data_modul/common/common.h | 18 ++ board/data_modul/imx8mm_edm_sbc/Makefile | 2 +- board/data_modul/imx8mm_edm_sbc/common.c | 37 ---- .../imx8mm_data_modul_edm_sbc.c | 66 +----- .../data_modul/imx8mm_edm_sbc/lpddr4_timing.h | 2 - board/data_modul/imx8mm_edm_sbc/spl.c | 81 +------- 7 files changed, 220 insertions(+), 180 deletions(-) create mode 100644 board/data_modul/common/common.c create mode 100644 board/data_modul/common/common.h delete mode 100644 board/data_modul/imx8mm_edm_sbc/common.c
diff --git a/board/data_modul/common/common.c b/board/data_modul/common/common.c new file mode 100644 index 00000000000..bf9a11472d1 --- /dev/null +++ b/board/data_modul/common/common.c @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2022 Marek Vasut marex@denx.de + */ + +#include <common.h> +#include <asm-generic/gpio.h> +#include <asm-generic/sections.h> +#include <asm/arch/clock.h> +#include <asm/arch/ddr.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/mach-imx/boot_mode.h> +#include <asm/mach-imx/iomux-v3.h> +#include <common.h> +#include <dm/uclass.h> +#include <hang.h> +#include <i2c_eeprom.h> +#include <image.h> +#include <init.h> +#include <net.h> +#include <spl.h> + +#include <dm/uclass.h> +#include <dm/device.h> +#include <dm/uclass-internal.h> +#include <dm/device-internal.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) + +u8 dmo_get_memcfg(void) +{ + struct gpio_desc gpio[4]; + u8 memcfg = 0; + ofnode node; + int i, ret; + + node = ofnode_path("/config"); + if (!ofnode_valid(node)) { + printf("%s: no /config node?\n", __func__); + return BIT(2) | BIT(0); + } + + ret = gpio_request_list_by_name_nodev(node, + "dmo,ram-coding-gpios", + gpio, ARRAY_SIZE(gpio), + GPIOD_IS_IN); + for (i = 0; i < ret; i++) + memcfg |= !!dm_gpio_get_value(&(gpio[i])) << i; + + gpio_free_list_nodev(gpio, ret); + + return memcfg; +} + +int board_phys_sdram_size(phys_size_t *size) +{ + u8 memcfg = dmo_get_memcfg(); + + *size = (4ULL >> ((memcfg >> 1) & 0x3)) * SZ_1G; + + return 0; +} + +#ifdef CONFIG_SPL_BUILD +static void data_modul_imx_edm_sbc_early_init_f(const iomux_v3_cfg_t wdog_pad) +{ + struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; + + imx_iomux_v3_setup_pad(wdog_pad | MUX_PAD_CTRL(WDOG_PAD_CTRL)); + + set_wdog_reset(wdog); +} + +__weak int data_modul_imx_edm_sbc_board_power_init(void) +{ + return 0; +} + +static void spl_dram_init(struct dram_timing_info *dram_timing_info[8]) +{ + u8 memcfg = dmo_get_memcfg(); + int i; + + printf("DDR: %d GiB x%d [0x%x]\n", + /* 0..4 GiB, 1..2 GiB, 0..1 GiB */ + 4 >> ((memcfg >> 1) & 0x3), + /* 0..x32, 1..x16 */ + 32 >> (memcfg & BIT(0)), + memcfg); + + if (!dram_timing_info[memcfg]) { + printf("Unsupported DRAM strapping, trying lowest supported. MEMCFG=0x%x\n", + memcfg); + for (i = 7; i >= 0; i--) + if (dram_timing_info[i]) /* Configuration found */ + break; + } + + ddr_init(dram_timing_info[memcfg]); +} + +void dmo_board_init_f(const iomux_v3_cfg_t wdog_pad, + struct dram_timing_info *dram_timing_info[8]) +{ + struct udevice *dev; + int ret; + + icache_enable(); + + arch_cpu_init(); + + init_uart_clk(2); + + data_modul_imx_edm_sbc_early_init_f(wdog_pad); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + ret = spl_early_init(); + if (ret) { + debug("spl_early_init() failed: %d\n", ret); + hang(); + } + + preloader_console_init(); + + ret = uclass_get_device_by_name(UCLASS_CLK, + "clock-controller@30380000", + &dev); + if (ret < 0) { + printf("Failed to find clock node. Check device tree\n"); + hang(); + } + + enable_tzc380(); + + data_modul_imx_edm_sbc_board_power_init(); + + /* DDR initialization */ + spl_dram_init(dram_timing_info); + + board_init_r(NULL, 0); +} +#else +void dmo_setup_boot_device(void) +{ + int boot_device = get_boot_device(); + char *devnum; + + devnum = env_get("devnum"); + if (devnum) /* devnum is already set */ + return; + + if (boot_device == MMC3_BOOT) /* eMMC */ + env_set_ulong("devnum", 0); + else + env_set_ulong("devnum", 1); +} + +void dmo_setup_mac_address(void) +{ + unsigned char enetaddr[6]; + struct udevice *dev; + int off, ret; + + ret = eth_env_get_enetaddr("ethaddr", enetaddr); + if (ret) /* ethaddr is already set */ + return; + + off = fdt_path_offset(gd->fdt_blob, "eeprom0"); + if (off < 0) { + printf("%s: No eeprom0 path offset\n", __func__); + return; + } + + ret = uclass_get_device_by_of_offset(UCLASS_I2C_EEPROM, off, &dev); + if (ret) { + printf("Cannot find EEPROM!\n"); + return; + } + + ret = i2c_eeprom_read(dev, 0xb0, enetaddr, 0x6); + if (ret) { + printf("Error reading configuration EEPROM!\n"); + return; + } + + if (is_valid_ethaddr(enetaddr)) + eth_env_set_enetaddr("ethaddr", enetaddr); +} +#endif diff --git a/board/data_modul/common/common.h b/board/data_modul/common/common.h new file mode 100644 index 00000000000..4f6b2bc17d4 --- /dev/null +++ b/board/data_modul/common/common.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2022 Marek Vasut marex@denx.de + */ + +#ifndef __EDM_SBC_COMMON_H__ +#define __EDM_SBC_COMMON_H__ + +#include <asm/arch/ddr.h> +#include <asm/mach-imx/iomux-v3.h> + +u8 dmo_get_memcfg(void); +void dmo_board_init_f(const iomux_v3_cfg_t wdog_pad, + struct dram_timing_info *dram_timing_info[8]); +void dmo_setup_boot_device(void); +void dmo_setup_mac_address(void); + +#endif /* __EDM_SBC_COMMON_H__ */ diff --git a/board/data_modul/imx8mm_edm_sbc/Makefile b/board/data_modul/imx8mm_edm_sbc/Makefile index eaba85d65b8..6d72e930fca 100644 --- a/board/data_modul/imx8mm_edm_sbc/Makefile +++ b/board/data_modul/imx8mm_edm_sbc/Makefile @@ -10,4 +10,4 @@ else obj-y += imx8mm_data_modul_edm_sbc.o endif
-obj-y += common.o +obj-y += ../common/common.o diff --git a/board/data_modul/imx8mm_edm_sbc/common.c b/board/data_modul/imx8mm_edm_sbc/common.c deleted file mode 100644 index 713f789da67..00000000000 --- a/board/data_modul/imx8mm_edm_sbc/common.c +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2022 Marek Vasut marex@denx.de - */ - -#include <common.h> -#include <asm/io.h> -#include <asm-generic/gpio.h> - -#include "lpddr4_timing.h" - -DECLARE_GLOBAL_DATA_PTR; - -u8 dmo_get_memcfg(void) -{ - struct gpio_desc gpio[4]; - u8 memcfg = 0; - ofnode node; - int i, ret; - - node = ofnode_path("/config"); - if (!ofnode_valid(node)) { - printf("%s: no /config node?\n", __func__); - return BIT(2) | BIT(0); - } - - ret = gpio_request_list_by_name_nodev(node, - "dmo,ram-coding-gpios", - gpio, ARRAY_SIZE(gpio), - GPIOD_IS_IN); - for (i = 0; i < ret; i++) - memcfg |= !!dm_gpio_get_value(&(gpio[i])) << i; - - gpio_free_list_nodev(gpio, ret); - - return memcfg; -} diff --git a/board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c b/board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c index 82856f7a08c..ff89333b732 100644 --- a/board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c +++ b/board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c @@ -5,76 +5,16 @@
#include <common.h> #include <asm/arch/clock.h> -#include <asm/arch/sys_proto.h> #include <asm/io.h> -#include <asm/mach-imx/boot_mode.h> #include <dm.h> #include <dm/device-internal.h> -#include <i2c_eeprom.h> #include <malloc.h> -#include <net.h> #include <spl.h>
-#include "lpddr4_timing.h" +#include "../common/common.h"
DECLARE_GLOBAL_DATA_PTR;
-int board_phys_sdram_size(phys_size_t *size) -{ - u8 memcfg = dmo_get_memcfg(); - - *size = (4ULL >> ((memcfg >> 1) & 0x3)) * SZ_1G; - - return 0; -} - -static void setup_mac_address(void) -{ - unsigned char enetaddr[6]; - struct udevice *dev; - int off, ret; - - ret = eth_env_get_enetaddr("ethaddr", enetaddr); - if (ret) /* ethaddr is already set */ - return; - - off = fdt_path_offset(gd->fdt_blob, "eeprom0"); - if (off < 0) { - printf("%s: No eeprom0 path offset\n", __func__); - return; - } - - ret = uclass_get_device_by_of_offset(UCLASS_I2C_EEPROM, off, &dev); - if (ret) { - printf("Cannot find EEPROM!\n"); - return; - } - - ret = i2c_eeprom_read(dev, 0xb0, enetaddr, 0x6); - if (ret) { - printf("Error reading configuration EEPROM!\n"); - return; - } - - if (is_valid_ethaddr(enetaddr)) - eth_env_set_enetaddr("ethaddr", enetaddr); -} - -static void setup_boot_device(void) -{ - int boot_device = get_boot_device(); - char *devnum; - - devnum = env_get("devnum"); - if (devnum) /* devnum is already set */ - return; - - if (boot_device == MMC3_BOOT) /* eMMC */ - env_set_ulong("devnum", 0); - else - env_set_ulong("devnum", 1); -} - int board_init(void) { return 0; @@ -85,8 +25,8 @@ int board_late_init(void) struct udevice *dev; int ret;
- setup_boot_device(); - setup_mac_address(); + dmo_setup_boot_device(); + dmo_setup_mac_address();
ret = uclass_get_device_by_name(UCLASS_MISC, "usb-hub@2c", &dev); if (ret) diff --git a/board/data_modul/imx8mm_edm_sbc/lpddr4_timing.h b/board/data_modul/imx8mm_edm_sbc/lpddr4_timing.h index 1fab9b14051..8b5368a104d 100644 --- a/board/data_modul/imx8mm_edm_sbc/lpddr4_timing.h +++ b/board/data_modul/imx8mm_edm_sbc/lpddr4_timing.h @@ -9,6 +9,4 @@ extern struct dram_timing_info dmo_imx8mm_sbc_dram_timing_16_32; extern struct dram_timing_info dmo_imx8mm_sbc_dram_timing_32_32;
-u8 dmo_get_memcfg(void); - #endif /* __LPDDR4_TIMING_H__ */ diff --git a/board/data_modul/imx8mm_edm_sbc/spl.c b/board/data_modul/imx8mm_edm_sbc/spl.c index f5063eb8c19..4a9c62fb86f 100644 --- a/board/data_modul/imx8mm_edm_sbc/spl.c +++ b/board/data_modul/imx8mm_edm_sbc/spl.c @@ -26,24 +26,11 @@
#include "lpddr4_timing.h"
-DECLARE_GLOBAL_DATA_PTR; - -#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) - -static const iomux_v3_cfg_t wdog_pads[] = { - IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), -}; +#include "../common/common.h"
-static void data_modul_imx8mm_edm_sbc_early_init_f(void) -{ - struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; - - imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); - - set_wdog_reset(wdog); -} +DECLARE_GLOBAL_DATA_PTR;
-static int data_modul_imx8mm_edm_sbc_board_power_init(void) +int data_modul_imx_edm_sbc_board_power_init(void) { struct udevice *dev; int ret; @@ -105,67 +92,7 @@ static struct dram_timing_info *dram_timing_info[8] = { NULL, /* INVALID */ };
-static void spl_dram_init(void) -{ - u8 memcfg = dmo_get_memcfg(); - int i; - - printf("DDR: %d GiB x%d [0x%x]\n", - /* 0..4 GiB, 1..2 GiB, 0..1 GiB */ - 4 >> ((memcfg >> 1) & 0x3), - /* 0..x32, 1..x16 */ - 32 >> (memcfg & BIT(0)), - memcfg); - - if (!dram_timing_info[memcfg]) { - printf("Unsupported DRAM strapping, trying lowest supported. MEMCFG=0x%x\n", - memcfg); - for (i = ARRAY_SIZE(dram_timing_info) - 1; i >= 0; i--) - if (dram_timing_info[i]) /* Configuration found */ - break; - } - - ddr_init(dram_timing_info[memcfg]); -} - void board_init_f(ulong dummy) { - struct udevice *dev; - int ret; - - icache_enable(); - - arch_cpu_init(); - - init_uart_clk(2); - - data_modul_imx8mm_edm_sbc_early_init_f(); - - /* Clear the BSS. */ - memset(__bss_start, 0, __bss_end - __bss_start); - - ret = spl_early_init(); - if (ret) { - debug("spl_early_init() failed: %d\n", ret); - hang(); - } - - preloader_console_init(); - - ret = uclass_get_device_by_name(UCLASS_CLK, - "clock-controller@30380000", - &dev); - if (ret < 0) { - printf("Failed to find clock node. Check device tree\n"); - hang(); - } - - enable_tzc380(); - - data_modul_imx8mm_edm_sbc_board_power_init(); - - /* DDR initialization */ - spl_dram_init(); - - board_init_r(NULL, 0); + dmo_board_init_f(IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B, dram_timing_info); }