This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---
arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/freescale/mpc8569mds/Kconfig | 12 - board/freescale/mpc8569mds/MAINTAINERS | 7 - board/freescale/mpc8569mds/Makefile | 13 - board/freescale/mpc8569mds/README | 77 ----- board/freescale/mpc8569mds/bcsr.c | 50 --- board/freescale/mpc8569mds/bcsr.h | 72 ---- board/freescale/mpc8569mds/ddr.c | 66 ---- board/freescale/mpc8569mds/law.c | 41 --- board/freescale/mpc8569mds/mpc8569mds.c | 585 -------------------------------- board/freescale/mpc8569mds/tlb.c | 95 ------ configs/MPC8569MDS_ATM_defconfig | 4 - configs/MPC8569MDS_defconfig | 3 - include/configs/MPC8569MDS.h | 583 ------------------------------- 14 files changed, 1612 deletions(-) delete mode 100644 board/freescale/mpc8569mds/Kconfig delete mode 100644 board/freescale/mpc8569mds/MAINTAINERS delete mode 100644 board/freescale/mpc8569mds/Makefile delete mode 100644 board/freescale/mpc8569mds/README delete mode 100644 board/freescale/mpc8569mds/bcsr.c delete mode 100644 board/freescale/mpc8569mds/bcsr.h delete mode 100644 board/freescale/mpc8569mds/ddr.c delete mode 100644 board/freescale/mpc8569mds/law.c delete mode 100644 board/freescale/mpc8569mds/mpc8569mds.c delete mode 100644 board/freescale/mpc8569mds/tlb.c delete mode 100644 configs/MPC8569MDS_ATM_defconfig delete mode 100644 configs/MPC8569MDS_defconfig delete mode 100644 include/configs/MPC8569MDS.h
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 2e4edb3..136f3be 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -43,9 +43,6 @@ config TARGET_P5040DS config TARGET_MPC8536DS bool "Support MPC8536DS"
-config TARGET_MPC8569MDS - bool "Support MPC8569MDS" - config TARGET_MPC8572DS bool "Support MPC8572DS"
@@ -133,7 +130,6 @@ source "board/freescale/bsc9132qds/Kconfig" source "board/freescale/c29xpcie/Kconfig" source "board/freescale/corenet_ds/Kconfig" source "board/freescale/mpc8536ds/Kconfig" -source "board/freescale/mpc8569mds/Kconfig" source "board/freescale/mpc8572ds/Kconfig" source "board/freescale/p1010rdb/Kconfig" source "board/freescale/p1022ds/Kconfig" diff --git a/board/freescale/mpc8569mds/Kconfig b/board/freescale/mpc8569mds/Kconfig deleted file mode 100644 index 4871857..0000000 --- a/board/freescale/mpc8569mds/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_MPC8569MDS - -config SYS_BOARD - default "mpc8569mds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8569MDS" - -endif diff --git a/board/freescale/mpc8569mds/MAINTAINERS b/board/freescale/mpc8569mds/MAINTAINERS deleted file mode 100644 index c181407..0000000 --- a/board/freescale/mpc8569mds/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -MPC8569MDS BOARD -#M: - -S: Maintained -F: board/freescale/mpc8569mds/ -F: include/configs/MPC8569MDS.h -F: configs/MPC8569MDS_defconfig -F: configs/MPC8569MDS_ATM_defconfig diff --git a/board/freescale/mpc8569mds/Makefile b/board/freescale/mpc8569mds/Makefile deleted file mode 100644 index 5f6e021..0000000 --- a/board/freescale/mpc8569mds/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# Copyright 2004-2009 Freescale Semiconductor. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += mpc8569mds.o -obj-y += bcsr.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o diff --git a/board/freescale/mpc8569mds/README b/board/freescale/mpc8569mds/README deleted file mode 100644 index 3d12a96..0000000 --- a/board/freescale/mpc8569mds/README +++ /dev/null @@ -1,77 +0,0 @@ -Overview --------- -MPC8569MDS is composed of two boards - PB (Processor Board) and PIB (Platform -I/O Board). The mpc8569 PowerTM processor is mounted on PB board. - -Building U-boot ------------ - make MPC8569MDS_config - make - -Memory Map ----------- -0x0000_0000 0x7fff_ffff DDR 2G -0xa000_0000 0xbfff_ffff PCIe MEM 512MB -0xe000_0000 0xe00f_ffff CCSRBAR 1M -0xe280_0000 0xe2ff_ffff PCIe I/O 8M -0xc000_0000 0xdfff_ffff SRIO 512MB -0xf000_0000 0xf3ff_ffff SDRAM 64MB -0xf800_0000 0xf800_7fff BCSR 32KB -0xf800_8000 0xf800_ffff PIB (CS4) 32KB -0xf801_0000 0xf801_7fff PIB (CS5) 32KB -0xfe00_0000 0xffff_ffff Flash 32MB - - -Flashing u-boot Images ---------------- - -Use the following commands to program u-boot image into flash: - - => tftp 1000000 u-boot.bin - => protect off all - => erase fff80000 ffffffff - => cp.b 1000000 fff80000 80000 - - -Setting the correct MAC addresses ------------------------ -The command - "mac", is introduced to set on-board system EEPROM in the format -defined in board/freescale/common/sys_eeprom.c. we must set all 8 MAC -addresses for the MPC8569MDS's 8 Ethernet ports and save it by "mac save" when -we first get the board. The commands are as follows: - => mac i NXID /* Set NXID to this EEPROM */ - => mac e 01 /* Set Errata, this value is not defined by hardware - designer, we can set whatever we want */ - => mac n a0 /* Set Serial Number. This is not defined by hardware - designer, we can set whatever we want */ - => mac date 090512080000 /* Set the date in YYMMDDhhmmss format */ - - => mac p 8 /* Set the number of mac ports, it should be 8 */ - => mac 0 xx:xx:xx:xx:xx:xx /* xx:xx:xx:xx:xx:xx should be the real mac - address, you can refer to the value on - the sticker of the rear side of the board - */ - ..... - => mac 7 xx:xx:xx:xx:xx:xx - => mac read - => mac save - -After resetting the board, the ethxaddrs will be filled with the mac addresses -if such environment variables are blank(never been set before). If the ethxaddr -has been set but we want to update it, we can use the following commands: - => setenv ethxaddr /* x = "none",1,2,3,4,5,6,7 */ - => save - => reset - - -Programming the ucode to flash ---------------------------------- -MPC8569 doesn't have ROM in QE, so we must upload the microcode(ucode) to QE's -IRAM so that the QE can work. The ucode binary can be downloaded from -http://opensource.freescale.com/firmware/, and it must be programmed to -the address 0xfff0000 in the flash. Otherwise, the QE can't work and uboot -hangs at "Net:" - - -Please note the above two steps(setting mac addresses and programming ucode) are -very important to get the board booting up and working properly. diff --git a/board/freescale/mpc8569mds/bcsr.c b/board/freescale/mpc8569mds/bcsr.c deleted file mode 100644 index 178d9f8..0000000 --- a/board/freescale/mpc8569mds/bcsr.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright (C) 2009 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> - -#include "bcsr.h" - -void enable_8569mds_flash_write(void) -{ - setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP); -} - -void disable_8569mds_flash_write(void) -{ - clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP); -} - -void enable_8569mds_qe_uec(void) -{ -#if defined(CONFIG_SYS_UCC_RGMII_MODE) - setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), - BCSR7_UCC1_GETH_EN | BCSR7_UCC1_RGMII_EN); - setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 8), - BCSR8_UCC2_GETH_EN | BCSR8_UCC2_RGMII_EN); - setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 9), - BCSR9_UCC3_GETH_EN | BCSR9_UCC3_RGMII_EN); - setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 10), - BCSR10_UCC4_GETH_EN | BCSR10_UCC4_RGMII_EN); -#elif defined(CONFIG_SYS_UCC_RMII_MODE) - /* Set UCC1-4 working at RMII mode */ - clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), - BCSR7_UCC1_GETH_EN | BCSR7_UCC1_RGMII_EN); - clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 8), - BCSR8_UCC2_GETH_EN | BCSR8_UCC2_RGMII_EN); - clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 9), - BCSR9_UCC3_GETH_EN | BCSR9_UCC3_RGMII_EN); - clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 10), - BCSR10_UCC4_GETH_EN | BCSR10_UCC4_RGMII_EN); - setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 9), BCSR9_UCC3_RMII_EN); -#endif -} - -void disable_8569mds_brd_eeprom_write_protect(void) -{ - clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), BCSR7_BRD_WRT_PROTECT); -} diff --git a/board/freescale/mpc8569mds/bcsr.h b/board/freescale/mpc8569mds/bcsr.h deleted file mode 100644 index 6f4d139..0000000 --- a/board/freescale/mpc8569mds/bcsr.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * Copyright (C) 2009 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __BCSR_H_ -#define __BCSR_H_ - -#include <common.h> - -/* BCSR Bit definitions*/ -/****************************************/ -/* BCSR defines */ -/****************************************/ -#define BCSR6_UPC1_EN 0x80 -#define BCSR6_UPC1_POS_EN 0x40 -#define BCSR6_UPC1_ADDR_EN 0x20 -#define BCSR6_UPC1_DEV2 0x10 -#define BCSR6_SD_CARD_1BIT 0x08 -#define BCSR6_SD_CARD_4BITS 0x04 -#define BCSR6_TDM2G_EN 0x02 -#define BCSR6_UCC7_RMII_EN 0x01 - -#define BCSR7_UCC1_GETH_EN 0x80 -#define BCSR7_UCC1_RGMII_EN 0x40 -#define BCSR7_UCC1_RTBI_EN 0x20 -#define BCSR7_GETHRST_MRVL 0x04 -#define BCSR7_BRD_WRT_PROTECT 0x02 - -#define BCSR8_UCC2_GETH_EN 0x80 -#define BCSR8_UCC2_RGMII_EN 0x40 -#define BCSR8_UCC2_RTBI_EN 0x20 -#define BCSR8_UEM_MARVEL_RESET 0x02 - -#define BCSR9_UCC3_GETH_EN 0x80 -#define BCSR9_UCC3_RGMII_EN 0x40 -#define BCSR9_UCC3_RTBI_EN 0x20 -#define BCSR9_UCC3_RMII_EN 0x10 -#define BCSR9_UCC3_UEM_MICREL 0x01 - -#define BCSR10_UCC4_GETH_EN 0x80 -#define BCSR10_UCC4_RGMII_EN 0x40 -#define BCSR10_UCC4_RTBI_EN 0x20 - -#define BCSR11_LED0 0x40 -#define BCSR11_LED1 0x20 -#define BCSR11_LED2 0x10 - -#define BCSR12_UCC6_RMII_EN 0x20 -#define BCSR12_UCC8_RMII_EN 0x20 - -#define BCSR15_SMII6_DIS 0x08 -#define BCSR15_SMII8_DIS 0x04 -#define BCSR15_QEUART_EN 0x01 - -#define BCSR16_UPC1_DEV2 0x02 - -#define BCSR17_nUSBEN 0x80 -#define BCSR17_nUSBLOWSPD 0x40 -#define BCSR17_USBVCC 0x20 -#define BCSR17_USBMODE 0x10 -#define BCSR17_FLASH_nWP 0x01 - -/*BCSR Utils functions*/ - -void enable_8569mds_flash_write(void); -void disable_8569mds_flash_write(void); -void enable_8569mds_qe_uec(void); -void disable_8569mds_brd_eeprom_write_protect(void); - -#endif /* __BCSR_H_ */ diff --git a/board/freescale/mpc8569mds/ddr.c b/board/freescale/mpc8569mds/ddr.c deleted file mode 100644 index ef404b1..0000000 --- a/board/freescale/mpc8569mds/ddr.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright 2009 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - */ - -#include <common.h> - -#include <fsl_ddr_sdram.h> -#include <fsl_ddr_dimm_params.h> - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - /* - * Factors to consider for clock adjust: - * - number of chips on bus - * - position of slot - * - DDR1 vs. DDR2? - * - ??? - * - * This needs to be determined on a board-by-board basis. - * 0110 3/4 cycle late - * 0111 7/8 cycle late - */ - popts->clk_adjust = 4; - - /* - * Factors to consider for CPO: - * - frequency - * - ddr1 vs. ddr2 - */ - popts->cpo_override = 0xff; - - /* - * Factors to consider for write data delay: - * - number of DIMMs - * - * 1 = 1/4 clock delay - * 2 = 1/2 clock delay - * 3 = 3/4 clock delay - * 4 = 1 clock delay - * 5 = 5/4 clock delay - * 6 = 3/2 clock delay - */ - popts->write_data_delay = 2; - - /* - * Enable half drive strength - */ - popts->half_strength_driver_enable = 1; - - /* Write leveling override */ - popts->wrlvl_en = 1; - popts->wrlvl_override = 1; - popts->wrlvl_sample = 0xa; - popts->wrlvl_start = 0x4; - - /* Rtt and Rtt_W override */ - popts->rtt_override = 1; - popts->rtt_override_value = DDR3_RTT_60_OHM; - popts->rtt_wr_override_value = 0; /* Rtt_WR= dynamic ODT off */ -} diff --git a/board/freescale/mpc8569mds/law.c b/board/freescale/mpc8569mds/law.c deleted file mode 100644 index a388ad1..0000000 --- a/board/freescale/mpc8569mds/law.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* - * LAW(Local Access Window) configuration: - * - *0) 0x0000_0000 0x7fff_ffff DDR 2G - *1) 0xa000_0000 0xbfff_ffff PCIe MEM 512MB - *-) 0xe000_0000 0xe00f_ffff CCSR 1M - *2) 0xe280_0000 0xe2ff_ffff PCIe I/O 8M - *3) 0xc000_0000 0xdfff_ffff SRIO 512MB - *4.a) 0xf000_0000 0xf3ff_ffff SDRAM 64MB - *4.b) 0xf800_0000 0xf800_7fff BCSR 32KB - *4.c) 0xf800_8000 0xf800_ffff PIB (CS4) 32KB - *4.d) 0xf801_0000 0xf801_7fff PIB (CS5) 32KB - *4.e) 0xfe00_0000 0xffff_ffff Flash 32MB - * - *Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - * - */ - -struct law_entry law_table[] = { -#ifndef CONFIG_SPD_EEPROM - SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_1G, LAW_TRGT_IF_DDR), -#endif - SET_LAW(CONFIG_SYS_BCSR_BASE_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c deleted file mode 100644 index 836578f..0000000 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ /dev/null @@ -1,585 +0,0 @@ -/* - * Copyright 2009-2010 Freescale Semiconductor. - * - * (C) Copyright 2002 Scott McNutt smcnutt@artesyncp.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <hwconfig.h> -#include <pci.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/cache.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_pci.h> -#include <fsl_ddr_sdram.h> -#include <asm/fsl_serdes.h> -#include <asm/io.h> -#include <spd_sdram.h> -#include <i2c.h> -#include <ioports.h> -#include <libfdt.h> -#include <fdt_support.h> -#include <fsl_esdhc.h> -#include <phy.h> - -#include "bcsr.h" -#if defined(CONFIG_PQ_MDS_PIB) -#include "../common/pq-mds-pib.h" -#endif - -const qe_iop_conf_t qe_iop_conf_tab[] = { - /* QE_MUX_MDC */ - {2, 31, 1, 0, 1}, /* QE_MUX_MDC */ - - /* QE_MUX_MDIO */ - {2, 30, 3, 0, 2}, /* QE_MUX_MDIO */ - -#if defined(CONFIG_SYS_UCC_RGMII_MODE) - /* UCC_1_RGMII */ - {2, 11, 2, 0, 1}, /* CLK12 */ - {0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */ - {0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */ - {0, 2, 1, 0, 1}, /* ENET1_TXD2_SER1_TXD2 */ - {0, 3, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3 */ - {0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */ - {0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */ - {0, 8, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2 */ - {0, 9, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3 */ - {0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */ - {0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */ - {2, 8, 2, 0, 1}, /* ENET1_GRXCLK */ - {2, 20, 1, 0, 2}, /* ENET1_GTXCLK */ - - /* UCC_2_RGMII */ - {2, 16, 2, 0, 3}, /* CLK17 */ - {0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */ - {0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */ - {0, 16, 1, 0, 1}, /* ENET2_TXD2_SER2_TXD2 */ - {0, 17, 1, 0, 1}, /* ENET2_TXD3_SER2_TXD3 */ - {0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */ - {0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */ - {0, 22, 2, 0, 1}, /* ENET2_RXD2_SER2_RXD2 */ - {0, 23, 2, 0, 1}, /* ENET2_RXD3_SER2_RXD3 */ - {0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */ - {0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */ - {2, 3, 2, 0, 1}, /* ENET2_GRXCLK */ - {2, 2, 1, 0, 2}, /* ENET2_GTXCLK */ - - /* UCC_3_RGMII */ - {2, 11, 2, 0, 1}, /* CLK12 */ - {0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */ - {0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */ - {0, 31, 1, 0, 2}, /* ENET3_TXD2_SER3_TXD2 */ - {1, 0, 1, 0, 3}, /* ENET3_TXD3_SER3_TXD3 */ - {1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */ - {1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */ - {1, 5, 2, 0, 2}, /* ENET3_RXD2_SER3_RXD2 */ - {1, 6, 2, 0, 3}, /* ENET3_RXD3_SER3_RXD3 */ - {1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */ - {1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */ - {2, 9, 2, 0, 2}, /* ENET3_GRXCLK */ - {2, 25, 1, 0, 2}, /* ENET3_GTXCLK */ - - /* UCC_4_RGMII */ - {2, 16, 2, 0, 3}, /* CLK17 */ - {1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */ - {1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */ - {1, 14, 1, 0, 1}, /* ENET4_TXD2_SER4_TXD2 */ - {1, 15, 1, 0, 2}, /* ENET4_TXD3_SER4_TXD3 */ - {1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */ - {1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */ - {1, 20, 2, 0, 1}, /* ENET4_RXD2_SER4_RXD2 */ - {1, 21, 2, 0, 2}, /* ENET4_RXD3_SER4_RXD3 */ - {1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */ - {1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */ - {2, 17, 2, 0, 2}, /* ENET4_GRXCLK */ - {2, 24, 1, 0, 2}, /* ENET4_GTXCLK */ - -#elif defined(CONFIG_SYS_UCC_RMII_MODE) - /* UCC_1_RMII */ - {2, 15, 2, 0, 1}, /* CLK16 */ - {0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */ - {0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */ - {0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */ - {0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */ - {0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */ - {0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */ - - /* UCC_2_RMII */ - {2, 15, 2, 0, 1}, /* CLK16 */ - {0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */ - {0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */ - {0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */ - {0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */ - {0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */ - {0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */ - - /* UCC_3_RMII */ - {2, 15, 2, 0, 1}, /* CLK16 */ - {0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */ - {0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */ - {1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */ - {1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */ - {1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */ - {1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */ - - /* UCC_4_RMII */ - {2, 15, 2, 0, 1}, /* CLK16 */ - {1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */ - {1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */ - {1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */ - {1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */ - {1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */ - {1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */ -#endif - - /* UART1 is muxed with QE PortF bit [9-12].*/ - {5, 12, 2, 0, 3}, /* UART1_SIN */ - {5, 9, 1, 0, 3}, /* UART1_SOUT */ - {5, 10, 2, 0, 3}, /* UART1_CTS_B */ - {5, 11, 1, 0, 2}, /* UART1_RTS_B */ - - /* QE UART */ - {0, 19, 1, 0, 2}, /* QEUART_TX */ - {1, 17, 2, 0, 3}, /* QEUART_RX */ - {0, 25, 1, 0, 1}, /* QEUART_RTS */ - {1, 23, 2, 0, 1}, /* QEUART_CTS */ - - /* QE USB */ - {5, 3, 1, 0, 1}, /* USB_OE */ - {5, 4, 1, 0, 2}, /* USB_TP */ - {5, 5, 1, 0, 2}, /* USB_TN */ - {5, 6, 2, 0, 2}, /* USB_RP */ - {5, 7, 2, 0, 1}, /* USB_RX */ - {5, 8, 2, 0, 1}, /* USB_RN */ - {2, 4, 2, 0, 2}, /* CLK5 */ - - /* SPI Flash, M25P40 */ - {4, 27, 3, 0, 1}, /* SPI_MOSI */ - {4, 28, 3, 0, 1}, /* SPI_MISO */ - {4, 29, 3, 0, 1}, /* SPI_CLK */ - {4, 30, 1, 0, 0}, /* SPI_SEL, GPIO */ - - {0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */ -}; - -void local_bus_init(void); - -int board_early_init_f (void) -{ - /* - * Initialize local bus. - */ - local_bus_init (); - - enable_8569mds_flash_write(); - -#ifdef CONFIG_QE - enable_8569mds_qe_uec(); -#endif - -#if CONFIG_SYS_I2C2_OFFSET - /* Enable I2C2 signals instead of SD signals */ - volatile struct ccsr_gur *gur; - gur = (struct ccsr_gur *)(CONFIG_SYS_IMMR + 0xe0000); - gur->plppar1 &= ~PLPPAR1_I2C_BIT_MASK; - gur->plppar1 |= PLPPAR1_I2C2_VAL; - gur->plpdir1 &= ~PLPDIR1_I2C_BIT_MASK; - gur->plpdir1 |= PLPDIR1_I2C2_VAL; - - disable_8569mds_brd_eeprom_write_protect(); -#endif - - return 0; -} - -int board_early_init_r(void) -{ - const unsigned int flashbase = CONFIG_SYS_NAND_BASE; - const u8 flash_esel = 0; - - /* - * Remap Boot flash to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - /* invalidate existing TLB entry for flash */ - disable_tlb(flash_esel); - - set_tlb(1, flashbase, CONFIG_SYS_NAND_BASE, /* tlb, epn, rpn */ - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ - 0, flash_esel, /* ts, esel */ - BOOKE_PAGESZ_64M, 1); /* tsize, iprot */ - - return 0; -} - -int checkboard (void) -{ - printf ("Board: 8569 MDS\n"); - - return 0; -} - -#if !defined(CONFIG_SPD_EEPROM) -phys_size_t fixed_sdram(void) -{ - struct ccsr_ddr __iomem *ddr = - (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; - uint d_init; - - out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS); - out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG); - out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); - out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); - out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); - out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); - out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG); - out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2); - out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_SDRAM_MODE); - out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_SDRAM_MODE_2); - out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_SDRAM_INTERVAL); - out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT); - out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL); - out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4); - out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5); - out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL); - out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL); - out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2); -#if defined (CONFIG_DDR_ECC) - out_be32(&ddr->err_int_en, CONFIG_SYS_DDR_ERR_INT_EN); - out_be32(&ddr->err_disable, CONFIG_SYS_DDR_ERR_DIS); - out_be32(&ddr->err_sbe, CONFIG_SYS_DDR_SBE); -#endif - udelay(500); - - out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL); -#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - d_init = 1; - debug("DDR - 1st controller: memory initializing\n"); - /* - * Poll until memory is initialized. - * 512 Meg at 400 might hit this 200 times or so. - */ - while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) { - udelay(1000); - } - debug("DDR: memory initialized\n\n"); - udelay(500); -#endif - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; -} -#endif - -/* - * Initialize Local Bus - */ -void -local_bus_init(void) -{ - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - - uint clkdiv; - sys_info_t sysinfo; - - get_sys_info(&sysinfo); - clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; - - out_be32(&gur->lbiuiplldcr1, 0x00078080); - if (clkdiv == 16) - out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0); - else if (clkdiv == 8) - out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0); - else if (clkdiv == 4) - out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0); - - out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)| 0x00030000); -} - -static void fdt_board_disable_serial(void *blob, bd_t *bd, const char *alias) -{ - const char *status = "disabled"; - int off; - int err; - - off = fdt_path_offset(blob, alias); - if (off < 0) { - printf("WARNING: could not find %s alias: %s.\n", alias, - fdt_strerror(off)); - return; - } - - err = fdt_setprop(blob, off, "status", status, strlen(status) + 1); - if (err) { - printf("WARNING: could not set status for serial0: %s.\n", - fdt_strerror(err)); - return; - } -} - -/* - * Because of an erratum in prototype boards it is impossible to use eSDHC - * without disabling UART0 (which makes it quite easy to 'brick' the board - * by simply issung 'setenv hwconfig esdhc', and not able to interact with - * U-Boot anylonger). - * - * So, but default we assume that the board is a prototype, which is a most - * safe assumption. There is no way to determine board revision from a - * register, so we use hwconfig. - */ - -static int prototype_board(void) -{ - if (hwconfig_subarg("board", "rev", NULL)) - return hwconfig_subarg_cmp("board", "rev", "prototype"); - return 1; -} - -static int esdhc_disables_uart0(void) -{ - return prototype_board() || - hwconfig_subarg_cmp("esdhc", "mode", "4-bits"); -} - -static void fdt_board_fixup_qe_uart(void *blob, bd_t *bd) -{ - u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE; - const char *devtype = "serial"; - const char *compat = "ucc_uart"; - const char *clk = "brg9"; - u32 portnum = 0; - int off = -1; - - if (!hwconfig("qe_uart")) - return; - - if (hwconfig("esdhc") && esdhc_disables_uart0()) { - printf("QE UART: won't enable with esdhc.\n"); - return; - } - - fdt_board_disable_serial(blob, bd, "serial1"); - - while (1) { - const u32 *idx; - int len; - - off = fdt_node_offset_by_compatible(blob, off, "ucc_geth"); - if (off < 0) { - printf("WARNING: unable to fixup device tree for " - "QE UART\n"); - return; - } - - idx = fdt_getprop(blob, off, "cell-index", &len); - if (!idx || len != sizeof(*idx) || *idx != fdt32_to_cpu(2)) - continue; - break; - } - - fdt_setprop(blob, off, "device_type", devtype, strlen(devtype) + 1); - fdt_setprop(blob, off, "compatible", compat, strlen(compat) + 1); - fdt_setprop(blob, off, "tx-clock-name", clk, strlen(clk) + 1); - fdt_setprop(blob, off, "rx-clock-name", clk, strlen(clk) + 1); - fdt_setprop(blob, off, "port-number", &portnum, sizeof(portnum)); - - setbits_8(&bcsr[15], BCSR15_QEUART_EN); -} - -#ifdef CONFIG_FSL_ESDHC - -int board_mmc_init(bd_t *bd) -{ - struct ccsr_gur *gur = (struct ccsr_gur *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE; - u8 bcsr6 = BCSR6_SD_CARD_1BIT; - - if (!hwconfig("esdhc")) - return 0; - - printf("Enabling eSDHC...\n" - " For eSDHC to function, I2C2 "); - if (esdhc_disables_uart0()) { - printf("and UART0 should be disabled.\n"); - printf(" Redirecting stderr, stdout and stdin to UART1...\n"); - console_assign(stderr, "eserial1"); - console_assign(stdout, "eserial1"); - console_assign(stdin, "eserial1"); - printf("Switched to UART1 (initial log has been printed to " - "UART0).\n"); - - clrsetbits_be32(&gur->plppar1, PLPPAR1_UART0_BIT_MASK, - PLPPAR1_ESDHC_4BITS_VAL); - clrsetbits_be32(&gur->plpdir1, PLPDIR1_UART0_BIT_MASK, - PLPDIR1_ESDHC_4BITS_VAL); - bcsr6 |= BCSR6_SD_CARD_4BITS; - } else { - printf("should be disabled.\n"); - } - - /* Assign I2C2 signals to eSDHC. */ - clrsetbits_be32(&gur->plppar1, PLPPAR1_I2C_BIT_MASK, - PLPPAR1_ESDHC_VAL); - clrsetbits_be32(&gur->plpdir1, PLPDIR1_I2C_BIT_MASK, - PLPDIR1_ESDHC_VAL); - - /* Mux I2C2 (and optionally UART0) signals to eSDHC. */ - setbits_8(&bcsr[6], bcsr6); - - return fsl_esdhc_mmc_init(bd); -} - -static void fdt_board_fixup_esdhc(void *blob, bd_t *bd) -{ - const char *status = "disabled"; - int off = -1; - - if (!hwconfig("esdhc")) - return; - - if (esdhc_disables_uart0()) - fdt_board_disable_serial(blob, bd, "serial0"); - - while (1) { - const u32 *idx; - int len; - - off = fdt_node_offset_by_compatible(blob, off, "fsl-i2c"); - if (off < 0) - break; - - idx = fdt_getprop(blob, off, "cell-index", &len); - if (!idx || len != sizeof(*idx)) - continue; - - if (*idx == 1) { - fdt_setprop(blob, off, "status", status, - strlen(status) + 1); - break; - } - } - - if (hwconfig_subarg_cmp("esdhc", "mode", "4-bits")) { - off = fdt_node_offset_by_compatible(blob, -1, "fsl,esdhc"); - if (off < 0) { - printf("WARNING: could not find esdhc node\n"); - return; - } - fdt_delprop(blob, off, "sdhci,1-bit-only"); - } -} -#else -static inline void fdt_board_fixup_esdhc(void *blob, bd_t *bd) {} -#endif - -static void fdt_board_fixup_qe_usb(void *blob, bd_t *bd) -{ - u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE; - - if (hwconfig_subarg_cmp("qe_usb", "speed", "low")) - clrbits_8(&bcsr[17], BCSR17_nUSBLOWSPD); - else - setbits_8(&bcsr[17], BCSR17_nUSBLOWSPD); - - if (hwconfig_subarg_cmp("qe_usb", "mode", "peripheral")) { - clrbits_8(&bcsr[17], BCSR17_USBVCC); - clrbits_8(&bcsr[17], BCSR17_USBMODE); - do_fixup_by_compat(blob, "fsl,mpc8569-qe-usb", "mode", - "peripheral", sizeof("peripheral"), 1); - } else { - setbits_8(&bcsr[17], BCSR17_USBVCC); - setbits_8(&bcsr[17], BCSR17_USBMODE); - } - - clrbits_8(&bcsr[17], BCSR17_nUSBEN); -} - -#ifdef CONFIG_PCI -void pci_init_board(void) -{ -#if defined(CONFIG_PQ_MDS_PIB) - pib_init(); -#endif - - fsl_pcie_init_board(0); -} -#endif /* CONFIG_PCI */ - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, bd_t *bd) -{ -#if defined(CONFIG_SYS_UCC_RMII_MODE) - int nodeoff, off, err; - unsigned int val; - const u32 *ph; - const u32 *index; - - /* fixup device tree for supporting rmii mode */ - nodeoff = -1; - while ((nodeoff = fdt_node_offset_by_compatible(blob, nodeoff, - "ucc_geth")) >= 0) { - err = fdt_setprop_string(blob, nodeoff, "tx-clock-name", - "clk16"); - if (err < 0) { - printf("WARNING: could not set tx-clock-name %s.\n", - fdt_strerror(err)); - break; - } - - err = fdt_fixup_phy_connection(blob, nodeoff, - PHY_INTERFACE_MODE_RMII); - - if (err < 0) { - printf("WARNING: could not set phy-connection-type " - "%s.\n", fdt_strerror(err)); - break; - } - - index = fdt_getprop(blob, nodeoff, "cell-index", 0); - if (index == NULL) { - printf("WARNING: could not get cell-index of ucc\n"); - break; - } - - ph = fdt_getprop(blob, nodeoff, "phy-handle", 0); - if (ph == NULL) { - printf("WARNING: could not get phy-handle of ucc\n"); - break; - } - - off = fdt_node_offset_by_phandle(blob, *ph); - if (off < 0) { - printf("WARNING: could not get phy node %s.\n", - fdt_strerror(err)); - break; - } - - val = 0x7 + *index; /* RMII phy address starts from 0x8 */ - - err = fdt_setprop(blob, off, "reg", &val, sizeof(u32)); - if (err < 0) { - printf("WARNING: could not set reg for phy-handle " - "%s.\n", fdt_strerror(err)); - break; - } - } -#endif - ft_cpu_setup(blob, bd); - - FT_FSL_PCI_SETUP; - - fdt_board_fixup_esdhc(blob, bd); - fdt_board_fixup_qe_uart(blob, bd); - fdt_board_fixup_qe_usb(blob, bd); - - return 0; -} -#endif diff --git a/board/freescale/mpc8569mds/tlb.c b/board/freescale/mpc8569mds/tlb.c deleted file mode 100644 index 1328a58..0000000 --- a/board/freescale/mpc8569mds/tlb.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * Copyright 2009-2010 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 Initializations */ - /* - * TLBe 0: 64M write-through, guarded - * Out of reset this entry is only 4K. - * 0xfc000000 32MB NAND FLASH (CS3) - * 0xfe000000 32MB NOR FLASH (CS0) - */ -#ifdef CONFIG_NAND_SPL - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_1M, 1), -#else - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, - 0, 0, BOOKE_PAGESZ_64M, 1), -#endif - /* - * TLBe 1: 256KB Non-cacheable, guarded - * 0xf8000000 32K BCSR - * 0xf8008000 32K PIB (CS4) - * 0xf8010000 32K PIB (CS5) - */ - SET_TLB_ENTRY(1, CONFIG_SYS_BCSR_BASE, CONFIG_SYS_BCSR_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_256K, 1), - - /* - * TLBe 2: 256M Non-cacheable, guarded - * 0xa00000000 256M PCIe MEM (lower half) - */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - - /* - * TLBe 3: 256M Non-cacheable, guarded - * 0xb00000000 256M PCIe MEM (higher half) - */ - SET_TLB_ENTRY(1, (CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000), - (CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000), - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_256M, 1), - - /* - * TLBe 4: 64M Non-cacheable, guarded - * 0xe000_0000 1M CCSRBAR - * 0xe280_0000 8M PCIe IO - */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_64M, 1), - -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) - /* *I*G - L2SRAM */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256K, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, - CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_256K, 1), -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/configs/MPC8569MDS_ATM_defconfig b/configs/MPC8569MDS_ATM_defconfig deleted file mode 100644 index 326983d..0000000 --- a/configs/MPC8569MDS_ATM_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_MPC8569MDS=y -CONFIG_SYS_EXTRA_OPTIONS="ATM" diff --git a/configs/MPC8569MDS_defconfig b/configs/MPC8569MDS_defconfig deleted file mode 100644 index 81fb82a..0000000 --- a/configs/MPC8569MDS_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_MPC8569MDS=y diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h deleted file mode 100644 index 78019b9..0000000 --- a/include/configs/MPC8569MDS.h +++ /dev/null @@ -1,583 +0,0 @@ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * mpc8569mds board configuration file - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High Level Configuration Options */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC8569 1 /* MPC8569 specific */ -#define CONFIG_MPC8569MDS 1 /* MPC8569MDS board specific */ - -#define CONFIG_FSL_ELBC 1 /* Has Enhance localbus controller */ - -#define CONFIG_SYS_SRIO -#define CONFIG_SRIO1 /* SRIO port 1 */ - -#define CONFIG_PCI 1 /* Disable PCI/PCIE */ -#define CONFIG_PCIE1 1 /* PCIE controller */ -#define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ -#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ -#define CONFIG_QE /* Enable QE */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ - -#ifndef __ASSEMBLY__ -extern unsigned long get_clock_freq(void); -#endif -/* Replace a call to get_clock_freq (after it is implemented)*/ -#define CONFIG_SYS_CLK_FREQ 66666666 -#define CONFIG_DDR_CLK_FREQ CONFIG_SYS_CLK_FREQ - -#ifdef CONFIG_ATM -#define CONFIG_PQ_MDS_PIB -#define CONFIG_PQ_MDS_PIB_ATM -#endif - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xfff80000 -#endif - -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - -/* - * Only possible on E500 Version 2 or newer cores. - */ -#define CONFIG_ENABLE_36BIT_PHYS 1 - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_BOARD_EARLY_INIT_R 1 -#define CONFIG_HWCONFIG - -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -/* - * Config the L2 Cache as L2 SRAM - */ -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_L2_SIZE (512 << 10) -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) - -#define CONFIG_SYS_CCSRBAR 0xe0000000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR - -#if defined(CONFIG_NAND_SPL) -#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE -#endif - -/* DDR Setup */ -#define CONFIG_SYS_FSL_DDR3 -#undef CONFIG_FSL_DDR_INTERACTIVE -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ -#define CONFIG_DDR_SPD -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ - -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 - /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) - -/* I2C addresses of SPD EEPROMs */ -#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ - -/* These are used when DDR doesn't use SPD. */ -#define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1024MB */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 -#define CONFIG_SYS_DDR_TIMING_3 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0 0x00330004 -#define CONFIG_SYS_DDR_TIMING_1 0x6F6B4644 -#define CONFIG_SYS_DDR_TIMING_2 0x002888D0 -#define CONFIG_SYS_DDR_SDRAM_CFG 0x47000000 -#define CONFIG_SYS_DDR_SDRAM_CFG_2 0x04401040 -#define CONFIG_SYS_DDR_SDRAM_MODE 0x40401521 -#define CONFIG_SYS_DDR_SDRAM_MODE_2 0x8000C000 -#define CONFIG_SYS_DDR_SDRAM_INTERVAL 0x03E00000 -#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef -#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL 0x01000000 -#define CONFIG_SYS_DDR_TIMING_4 0x00220001 -#define CONFIG_SYS_DDR_TIMING_5 0x03402400 -#define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600 -#define CONFIG_SYS_DDR_WRLVL_CNTL 0x0655A604 -#define CONFIG_SYS_DDR_CDR_1 0x80040000 -#define CONFIG_SYS_DDR_CDR_2 0x00000000 -#define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 -#define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 -#define CONFIG_SYS_DDR_CONTROL 0xc7000000 /* Type = DDR3 */ -#define CONFIG_SYS_DDR_CONTROL2 0x24400000 - -#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d -#define CONFIG_SYS_DDR_ERR_DIS 0x00000000 -#define CONFIG_SYS_DDR_SBE 0x00010000 - -#undef CONFIG_CLOCKS_IN_MHZ - -/* - * Local Bus Definitions - */ - -#define CONFIG_SYS_FLASH_BASE 0xfe000000 /* start of FLASH 32M */ -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE - -#define CONFIG_SYS_BCSR_BASE 0xf8000000 -#define CONFIG_SYS_BCSR_BASE_PHYS CONFIG_SYS_BCSR_BASE - -/*Chip select 0 - Flash*/ -#define CONFIG_FLASH_BR_PRELIM 0xfe000801 -#define CONFIG_FLASH_OR_PRELIM 0xfe000ff7 - -/*Chip select 1 - BCSR*/ -#define CONFIG_SYS_BR1_PRELIM 0xf8000801 -#define CONFIG_SYS_OR1_PRELIM 0xffffe9f7 - -/*Chip select 4 - PIB*/ -#define CONFIG_SYS_BR4_PRELIM 0xf8008801 -#define CONFIG_SYS_OR4_PRELIM 0xffffe9f7 - -/*Chip select 5 - PIB*/ -#define CONFIG_SYS_BR5_PRELIM 0xf8010801 -#define CONFIG_SYS_OR5_PRELIM 0xffffe9f7 - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#undef CONFIG_SYS_RAMBOOT - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO - -/* Chip select 3 - NAND */ -#ifndef CONFIG_NAND_SPL -#define CONFIG_SYS_NAND_BASE 0xFC000000 -#else -#define CONFIG_SYS_NAND_BASE 0xFFF00000 -#endif - -/* NAND boot: 4K NAND loader config */ -#define CONFIG_SYS_NAND_SPL_SIZE 0x1000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) -#define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) -#define CONFIG_SYS_NAND_U_BOOT_START \ - (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_OFFS (0) -#define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) - -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_CMD_NAND 1 -#define CONFIG_NAND_FSL_ELBC 1 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) -#define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE_PHYS \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 /* Port Size = 8 bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) - -#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#define CONFIG_SYS_BR3_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ - -#define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */ -#define CONFIG_SYS_LBC_LBCR 0x00040000 /* LB config reg */ -#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ -#define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ - -/* Serial Port */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#ifdef CONFIG_NAND_SPL -#define CONFIG_NS16550_MIN_FUNCTIONS -#endif - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* Use the HUSH parser*/ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#endif - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* - * I2C - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } - -/* - * I2C2 EEPROM - */ -#define CONFIG_ID_EEPROM -#ifdef CONFIG_ID_EEPROM -#define CONFIG_SYS_I2C_EEPROM_NXID -#endif -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_BUS_NUM 1 - -#define PLPPAR1_I2C_BIT_MASK 0x0000000F -#define PLPPAR1_I2C2_VAL 0x00000000 -#define PLPPAR1_ESDHC_VAL 0x0000000A -#define PLPDIR1_I2C_BIT_MASK 0x0000000F -#define PLPDIR1_I2C2_VAL 0x0000000F -#define PLPDIR1_ESDHC_VAL 0x00000006 -#define PLPPAR1_UART0_BIT_MASK 0x00000fc0 -#define PLPPAR1_ESDHC_4BITS_VAL 0x00000a80 -#define PLPDIR1_UART0_BIT_MASK 0x00000fc0 -#define PLPDIR1_ESDHC_4BITS_VAL 0x00000a80 - -/* - * General PCI - * Memory Addresses are mapped 1-1. I/O is mapped from 0 - */ -#define CONFIG_SYS_PCIE1_NAME "Slot" -#define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 -#define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_VIRT 0xe2800000 -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000 -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ - -#define CONFIG_SYS_SRIO1_MEM_VIRT 0xC0000000 -#define CONFIG_SYS_SRIO1_MEM_BUS 0xC0000000 -#define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_BUS -#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ - -#ifdef CONFIG_QE -/* - * QE UEC ethernet configuration - */ -#define CONFIG_SYS_UCC_RGMII_MODE /* Set UCC work at RGMII by default */ -#undef CONFIG_SYS_UCC_RMII_MODE /* Set UCC work at RMII mode */ - -#define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) -#define CONFIG_UEC_ETH -#define CONFIG_ETHPRIME "UEC0" -#define CONFIG_PHY_MODE_NEED_CHANGE - -#define CONFIG_UEC_ETH1 /* GETH1 */ -#define CONFIG_HAS_ETH0 - -#ifdef CONFIG_UEC_ETH1 -#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ -#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE -#if defined(CONFIG_SYS_UCC_RGMII_MODE) -#define CONFIG_SYS_UEC1_TX_CLK QE_CLK12 -#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH -#define CONFIG_SYS_UEC1_PHY_ADDR 7 -#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID -#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000 -#elif defined(CONFIG_SYS_UCC_RMII_MODE) -#define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 /* CLK16 for RMII */ -#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC1_PHY_ADDR 8 /* 0x8 for RMII */ -#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII -#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 -#endif /* CONFIG_SYS_UCC_RGMII_MODE */ -#endif /* CONFIG_UEC_ETH1 */ - -#define CONFIG_UEC_ETH2 /* GETH2 */ -#define CONFIG_HAS_ETH1 - -#ifdef CONFIG_UEC_ETH2 -#define CONFIG_SYS_UEC2_UCC_NUM 1 /* UCC2 */ -#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE -#if defined(CONFIG_SYS_UCC_RGMII_MODE) -#define CONFIG_SYS_UEC2_TX_CLK QE_CLK17 -#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH -#define CONFIG_SYS_UEC2_PHY_ADDR 1 -#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID -#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000 -#elif defined(CONFIG_SYS_UCC_RMII_MODE) -#define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 /* CLK 16 for RMII */ -#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC2_PHY_ADDR 0x9 /* 0x9 for RMII */ -#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII -#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 -#endif /* CONFIG_SYS_UCC_RGMII_MODE */ -#endif /* CONFIG_UEC_ETH2 */ - -#define CONFIG_UEC_ETH3 /* GETH3 */ -#define CONFIG_HAS_ETH2 - -#ifdef CONFIG_UEC_ETH3 -#define CONFIG_SYS_UEC3_UCC_NUM 2 /* UCC3 */ -#define CONFIG_SYS_UEC3_RX_CLK QE_CLK_NONE -#if defined(CONFIG_SYS_UCC_RGMII_MODE) -#define CONFIG_SYS_UEC3_TX_CLK QE_CLK12 -#define CONFIG_SYS_UEC3_ETH_TYPE GIGA_ETH -#define CONFIG_SYS_UEC3_PHY_ADDR 2 -#define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID -#define CONFIG_SYS_UEC3_INTERFACE_SPEED 1000 -#elif defined(CONFIG_SYS_UCC_RMII_MODE) -#define CONFIG_SYS_UEC3_TX_CLK QE_CLK16 /* CLK_16 for RMII */ -#define CONFIG_SYS_UEC3_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC3_PHY_ADDR 0xA /* 0xA for RMII */ -#define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII -#define CONFIG_SYS_UEC3_INTERFACE_SPEED 100 -#endif /* CONFIG_SYS_UCC_RGMII_MODE */ -#endif /* CONFIG_UEC_ETH3 */ - -#define CONFIG_UEC_ETH4 /* GETH4 */ -#define CONFIG_HAS_ETH3 - -#ifdef CONFIG_UEC_ETH4 -#define CONFIG_SYS_UEC4_UCC_NUM 3 /* UCC4 */ -#define CONFIG_SYS_UEC4_RX_CLK QE_CLK_NONE -#if defined(CONFIG_SYS_UCC_RGMII_MODE) -#define CONFIG_SYS_UEC4_TX_CLK QE_CLK17 -#define CONFIG_SYS_UEC4_ETH_TYPE GIGA_ETH -#define CONFIG_SYS_UEC4_PHY_ADDR 3 -#define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID -#define CONFIG_SYS_UEC4_INTERFACE_SPEED 1000 -#elif defined(CONFIG_SYS_UCC_RMII_MODE) -#define CONFIG_SYS_UEC4_TX_CLK QE_CLK16 /* CLK16 for RMII */ -#define CONFIG_SYS_UEC4_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC4_PHY_ADDR 0xB /* 0xB for RMII */ -#define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII -#define CONFIG_SYS_UEC4_INTERFACE_SPEED 100 -#endif /* CONFIG_SYS_UCC_RGMII_MODE */ -#endif /* CONFIG_UEC_ETH4 */ - -#undef CONFIG_UEC_ETH6 /* GETH6 */ -#define CONFIG_HAS_ETH5 - -#ifdef CONFIG_UEC_ETH6 -#define CONFIG_SYS_UEC6_UCC_NUM 5 /* UCC6 */ -#define CONFIG_SYS_UEC6_RX_CLK QE_CLK_NONE -#define CONFIG_SYS_UEC6_TX_CLK QE_CLK_NONE -#define CONFIG_SYS_UEC6_ETH_TYPE GIGA_ETH -#define CONFIG_SYS_UEC6_PHY_ADDR 4 -#define CONFIG_SYS_UEC6_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII -#define CONFIG_SYS_UEC6_INTERFACE_SPEED 1000 -#endif /* CONFIG_UEC_ETH6 */ - -#undef CONFIG_UEC_ETH8 /* GETH8 */ -#define CONFIG_HAS_ETH7 - -#ifdef CONFIG_UEC_ETH8 -#define CONFIG_SYS_UEC8_UCC_NUM 7 /* UCC8 */ -#define CONFIG_SYS_UEC8_RX_CLK QE_CLK_NONE -#define CONFIG_SYS_UEC8_TX_CLK QE_CLK_NONE -#define CONFIG_SYS_UEC8_ETH_TYPE GIGA_ETH -#define CONFIG_SYS_UEC8_PHY_ADDR 6 -#define CONFIG_SYS_UEC8_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII -#define CONFIG_SYS_UEC8_INTERFACE_SPEED 1000 -#endif /* CONFIG_UEC_ETH8 */ - -#endif /* CONFIG_QE */ - -#if defined(CONFIG_PCI) - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - -#undef CONFIG_EEPRO100 -#undef CONFIG_TULIP -#define CONFIG_E1000 /* Define e1000 pci Ethernet card */ - -#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#endif /* CONFIG_PCI */ - -/* - * Environment - */ -#if defined(CONFIG_SYS_RAMBOOT) -#else -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ -#define CONFIG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* QE microcode/firmware address */ -#define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FW_ADDR 0xfff00000 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_ELF -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_MMC 1 - -#ifdef CONFIG_MMC -#define CONFIG_FSL_ESDHC -#define CONFIG_FSL_ESDHC_PIN_MUX -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_CMD_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 2048 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - /* Boot Argument Buffer Size */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Environment Configuration - */ -#define CONFIG_HOSTNAME mpc8569mds -#define CONFIG_ROOTPATH "/nfsroot" -#define CONFIG_BOOTFILE "your.uImage" - -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.255.0 - -#define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/ - -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=600000\0" \ - "ramdiskfile=your.ramdisk.u-boot\0" \ - "fdtaddr=400000\0" \ - "fdtfile=your.fdt.dtb\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs\0" \ - "ramargs=setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs\0" \ - -#define CONFIG_NFSBOOTCOMMAND \ - "run nfsargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "run ramargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr $ramdiskaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND - -#endif /* __CONFIG_H */