From: Yuan Yao yao.yuan@nxp.com
This patch adds QSPI boot support for LS2080AQDS board. The QSPI boot image need to be programmed into the QSPI flash first. Then the booting will start from QSPI memory space.
Signed-off-by: Yuan Yao yao.yuan@nxp.com --- configs/ls2080aqds_qspi_defconfig | 10 ++++++++++ include/configs/ls2080a_common.h | 2 ++ include/configs/ls2080aqds.h | 12 +++++++++++- 3 files changed, 23 insertions(+), 1 deletion(-) create mode 100644 configs/ls2080aqds_qspi_defconfig
diff --git a/configs/ls2080aqds_qspi_defconfig b/configs/ls2080aqds_qspi_defconfig new file mode 100644 index 0000000..8f84b23 --- /dev/null +++ b/configs/ls2080aqds_qspi_defconfig @@ -0,0 +1,10 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS2080AQDS=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds" +CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,QSPI_BOOT,LS2080A" +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_DM_SPI_FLASH=y +CONFIG_DM_SPI=y +CONFIG_SYS_NS16550=y +CONFIG_FSL_QSPI=y diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 8048753..c131441 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -29,11 +29,13 @@ #define CONFIG_ARCH_MISC_INIT
/* Link Definitions */ +#ifndef CONFIG_QSPI_BOOT #ifdef CONFIG_SPL #define CONFIG_SYS_TEXT_BASE 0x80400000 #else #define CONFIG_SYS_TEXT_BASE 0x30100000 #endif +#endif
#ifdef CONFIG_EMU #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index eaca55c..513a2e3 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -17,8 +17,16 @@ unsigned long get_board_ddr_clk(void); #endif
#define CONFIG_SYS_FSL_CLK +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_SYS_TEXT_BASE 0x20010000 +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#endif
-#ifdef CONFIG_FSL_QSPI +#if defined(CONFIG_QSPI_BOOT) || \ + (defined(CONFIG_NAND) && defined(CONFIG_FSL_QSPI)) #define CONFIG_SYS_NO_FLASH #undef CONFIG_CMD_IMLS #define CONFIG_SYS_CLK_FREQ 100000000 @@ -270,11 +278,13 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
+#ifndef CONFIG_QSPI_BOOT #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x2000 #endif +#endif
/* Debug Server firmware */ #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR