Re: [U-Boot] [PATCH] cmd_sf: Mention in the help text that mode, addr, offset and len must be given in hex.

On Thu, Oct 24, 2013 at 7:14 PM, Jakob Unterwurzacher jakob.unterwurzacher@theobroma-systems.com wrote:

These parameters are always interpreted as hex, even without 0x prefix.

Signed-off-by: Jakob Unterwurzacher jakob.unterwurzacher@theobroma-systems.com

common/cmd_sf.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/common/cmd_sf.c b/common/cmd_sf.c index 0a17782..0f7c0a3 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -531,6 +531,7 @@ U_BOOT_CMD( "sf erase offset [+]len - erase `len' bytes from `offset'\n" " `+len' round up `len' to block size\n" "sf update addr offset len - erase and write `len' bytes from memory\n"

•   "                                 at `addr' to flash at `offset'"
  

•   "                                 at `addr' to flash at `offset'\n"
  

•   "Parameters mode, addr, offset and len must be in hex."
    SF_TEST_HELP
  

);

All in u-boot treated similar, i don't think the point here to add notes. Sorry, rejected.