Dear Jason Kridner,
In message 1288936236-30603-1-git-send-email-jkridner@beagleboard.org you wrote:
It is desired to have the led command on the BeagleBoard to allow for some interaction in the scripts.
This patch allows any board implementing the coloured LED API to control the LEDs from the console.
led [green | yellow | red | all ] [ on | off ]
or
led [ 1 | 2 | 3 | all ] [ on | off ]
Adds configuration item CONFIG_CMD_LED enabling the command.
Partially based on patch from Ulf Samuelsson: http://www.mail-archive.com/u-boot@lists.denx.de/msg09593.html.
Signed-off-by: Jason Kridner jkridner@beagleboard.org
common/Makefile | 1 + common/cmd_led.c | 207 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 208 insertions(+), 0 deletions(-) create mode 100644 common/cmd_led.c
I understand the requirement, but I think it is more than time to come up with a common solution here instead of adding more and more copies of very similar code.
We already have:
arch/arm/cpu/arm920t/ep93xx/led.c arch/arm/cpu/arm926ejs/at91/led.c board/atmel/at91cap9adk/led.c board/atmel/at91rm9200dk/led.c board/atmel/at91rm9200ek/led.c board/atmel/at91sam9260ek/led.c board/atmel/at91sam9261ek/led.c board/atmel/at91sam9263ek/led.c board/atmel/at91sam9m10g45ek/led.c board/atmel/at91sam9rlek/led.c board/eukrea/cpu9260/led.c board/logicpd/zoom2/led.c board/ns9750dev/led.c board/psyent/pk1c20/led.c board/ronetix/pm9261/led.c board/ronetix/pm9263/led.c
Please, let's unify these.
Best regards,
Wolfgang Denk