[U-Boot] davinci: lowlevel_init for davinci boards

7 Jul 2010


      Hi,
I plan to use a davinci DM365 processor booting directly from a NOR
flash, without using the UBL provided by Texas. So I do not want to set
CONFIG_SKIP_LOWLEVEL_INIT in my config.
I am confused about the low level initialization for davinci SOC:
arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S sounds to be general for
all DaVinci processors, but after a check I can see that it does not
match at least for the DM365 (most offset are wrong). I have search for
boards using this file, and it seems that only the sonata board could
use it, if it does not boot from nand (it has a DM644).
Is the actual lowlevel_init.S really specialized only for the DM644 ? Do
we need a specialized file for the other processors, too ? Or am I
missing something ?
Best regards,
Stefano Babic
-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office@denx.de
=====================================================================