[U-Boot] [PATCH v2 11/13] arm: dts: dra7: sync DT with latest Linux

Sync all dra7* specific dts files with the upstream kernel including changes queued for 4.14

https://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git/log/?h...

Signed-off-by: Lokesh Vutla lokeshvutla@ti.com --- arch/arm/dts/am571x-idk.dts | 56 ++- arch/arm/dts/am572x-idk.dts | 64 ++- arch/arm/dts/am57xx-beagle-x15-common.dtsi | 61 ++- arch/arm/dts/am57xx-beagle-x15-revb1.dts | 22 +- arch/arm/dts/am57xx-beagle-x15-revc.dts | 39 ++ arch/arm/dts/am57xx-beagle-x15.dts | 16 + arch/arm/dts/am57xx-cl-som-am57x.dts | 617 +++++++++++++++++++++++++++ arch/arm/dts/am57xx-idk-common.dtsi | 118 +++++- arch/arm/dts/am57xx-sbc-am57x.dts | 179 ++++++++ arch/arm/dts/dra7-evm-common.dtsi | 258 ++++++++++++ arch/arm/dts/dra7-evm.dts | 558 +++---------------------- arch/arm/dts/dra7.dtsi | 101 ++++- arch/arm/dts/dra71-evm.dts | 45 +- arch/arm/dts/dra72-evm-common.dtsi | 31 +- arch/arm/dts/dra72-evm-revc.dts | 42 +- arch/arm/dts/dra72-evm-tps65917.dtsi | 16 + arch/arm/dts/dra72-evm.dts | 32 ++ arch/arm/dts/dra72x-mmc-iodelay.dtsi | 350 ++++++++++++++++ arch/arm/dts/dra72x.dtsi | 37 +- arch/arm/dts/dra74x-mmc-iodelay.dtsi | 647 +++++++++++++++++++++++++++++ arch/arm/dts/dra74x.dtsi | 92 ++-- arch/arm/dts/dra76-evm.dts | 423 +++++++++++++++++++ arch/arm/dts/dra76x.dtsi | 19 + arch/arm/dts/dra7xx-clocks.dtsi | 20 + include/dt-bindings/pinctrl/dra.h | 3 + 25 files changed, 3210 insertions(+), 636 deletions(-) create mode 100644 arch/arm/dts/am57xx-beagle-x15-revc.dts create mode 100644 arch/arm/dts/am57xx-cl-som-am57x.dts create mode 100644 arch/arm/dts/am57xx-sbc-am57x.dts create mode 100644 arch/arm/dts/dra7-evm-common.dtsi create mode 100644 arch/arm/dts/dra72x-mmc-iodelay.dtsi create mode 100644 arch/arm/dts/dra74x-mmc-iodelay.dtsi create mode 100644 arch/arm/dts/dra76-evm.dts create mode 100644 arch/arm/dts/dra76x.dtsi

diff --git a/arch/arm/dts/am571x-idk.dts b/arch/arm/dts/am571x-idk.dts index ac69bb0616..debf946440 100644 --- a/arch/arm/dts/am571x-idk.dts +++ b/arch/arm/dts/am571x-idk.dts @@ -11,6 +11,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include "am57xx-idk-common.dtsi" +#include "dra72x-mmc-iodelay.dtsi"

/ { model = "TI AM5718 IDK"; @@ -62,20 +63,57 @@ linux,default-trigger = "mmc0"; }; }; +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +};

- extcon_usb2: extcon_usb2 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; +&extcon_usb2 { + id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; }; };

-&mmc1 { +&mailbox6 { status = "okay"; - vmmc-supply = <&ldo1_reg>; - bus-width = <4>; - cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; };

-&omap_dwc3_2 { - extcon = <&extcon_usb2>; +&pcie1_rc { + status = "okay"; + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; +}; + +&pcie1_ep { + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; +}; + +&mmc1 { + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; +}; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; }; diff --git a/arch/arm/dts/am572x-idk.dts b/arch/arm/dts/am572x-idk.dts index f9adc00a64..a578fe97ba 100644 --- a/arch/arm/dts/am572x-idk.dts +++ b/arch/arm/dts/am572x-idk.dts @@ -12,6 +12,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include "am57xx-idk-common.dtsi" +#include "dra74x-mmc-iodelay.dtsi"

/ { model = "TI AM5728 IDK"; @@ -23,11 +24,6 @@ reg = <0x0 0x80000000 0x0 0x80000000>; };

- extcon_usb2: extcon_usb2 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; - }; - status-leds { compatible = "gpio-leds"; cpu0-led { @@ -72,14 +68,62 @@ }; };

+&mmc1 { + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; +}; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_rev20>; +}; + &omap_dwc3_2 { extcon = <&extcon_usb2>; };

-&mmc1 { +&extcon_usb2 { + id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; +}; + +&sn65hvs882 { + load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; +}; + +&pcie1_rc { status = "okay"; - vmmc-supply = <&v3_3d>; - vmmc_aux-supply = <&ldo1_reg>; - bus-width = <4>; - cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; +}; + +&pcie1_ep { + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; }; diff --git a/arch/arm/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/dts/am57xx-beagle-x15-common.dtsi index 01a9e56bfd..49aeecd312 100644 --- a/arch/arm/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/dts/am57xx-beagle-x15-common.dtsi @@ -9,16 +9,13 @@

#include "dra74x.dtsi" #include "am57xx-commercial-grade.dtsi" +#include "dra74x-mmc-iodelay.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h>

/ { compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";

- chosen { - stdout-path = &uart3; - }; - aliases { rtc0 = &mcp_rtc; rtc1 = &tps659038_rtc; @@ -26,6 +23,10 @@ display0 = &hdmi0; };

+ chosen { + stdout-path = &uart3; + }; + memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; @@ -166,34 +167,6 @@ }; };

-&dra7_pmx_core { - mmc1_pins_default: mmc1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ - DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ - >; - }; - - mmc2_pins_default: mmc2_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ - DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ - DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ - DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ - DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ - DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ - DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ - DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ - DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ - DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ - >; - }; -}; &i2c1 { status = "okay"; clock-frequency = <400000>; @@ -208,6 +181,7 @@ interrupt-controller;

ti,system-power-controller; + ti,palmas-override-powerhold;

tps659038_pmic { compatible = "ti,tps659038-pmic"; @@ -387,7 +361,7 @@ };

eeprom: eeprom@50 { - compatible = "at,24c32"; + compatible = "atmel,24c32"; reg = <0x50>; }; }; @@ -424,19 +398,29 @@ <&dra7_pmx_core 0x3f8>; };

+&davinci_mdio { + phy0: ethernet-phy@1 { + reg = <1>; + }; + + phy1: ethernet-phy@2 { + reg = <2>; + }; +}; + &mac { status = "okay"; dual_emac; };

&cpsw_emac0 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&phy0>; phy-mode = "rgmii"; dual_emac_res_vlan = <1>; };

&cpsw_emac1 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <&phy1>; phy-mode = "rgmii"; dual_emac_res_vlan = <2>; }; @@ -559,7 +543,12 @@ }; };

-&pcie1 { +&pcie1_rc { + status = "ok"; + gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; +}; + +&pcie1_ep { gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; };

diff --git a/arch/arm/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/dts/am57xx-beagle-x15-revb1.dts index ca85570629..5a77b33492 100644 --- a/arch/arm/dts/am57xx-beagle-x15-revb1.dts +++ b/arch/arm/dts/am57xx-beagle-x15-revb1.dts @@ -19,6 +19,26 @@ };

&mmc1 { + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>; vmmc-supply = <&vdd_3v3>; - vmmc-aux-supply = <&ldo1_reg>; + vqmmc-supply = <&ldo1_reg>; +}; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>; +}; + +/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */ +&phy1 { + max-speed = <100>; }; diff --git a/arch/arm/dts/am57xx-beagle-x15-revc.dts b/arch/arm/dts/am57xx-beagle-x15-revc.dts new file mode 100644 index 0000000000..17c41da3b5 --- /dev/null +++ b/arch/arm/dts/am57xx-beagle-x15-revc.dts @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am57xx-beagle-x15-common.dtsi" + +/ { + model = "TI AM5728 BeagleBoard-X15 rev C"; +}; + +&tpd12s015 { + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ + <&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio2_30, LS OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ +}; + +&mmc1 { + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; + vmmc-supply = <&vdd_3v3>; + vqmmc-supply = <&ldo1_reg>; +}; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_rev20>; +}; diff --git a/arch/arm/dts/am57xx-beagle-x15.dts b/arch/arm/dts/am57xx-beagle-x15.dts index 8c66f2efd2..d6689106d2 100644 --- a/arch/arm/dts/am57xx-beagle-x15.dts +++ b/arch/arm/dts/am57xx-beagle-x15.dts @@ -20,5 +20,21 @@ };

&mmc1 { + pinctrl-names = "default", "hs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + vmmc-supply = <&ldo1_reg>; }; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>; +}; + +/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */ +&phy1 { + max-speed = <100>; +}; diff --git a/arch/arm/dts/am57xx-cl-som-am57x.dts b/arch/arm/dts/am57xx-cl-som-am57x.dts new file mode 100644 index 0000000000..203266f884 --- /dev/null +++ b/arch/arm/dts/am57xx-cl-som-am57x.dts @@ -0,0 +1,617 @@ +/* + * Support for CompuLab CL-SOM-AM57x System-on-Module + * + * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ + * Author: Dmitry Lifshitz lifshitz@compulab.co.il + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "dra74x.dtsi" + +/ { + model = "CompuLab CL-SOM-AM57x"; + compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */ + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins_default>; + + led0 { + label = "cl-som-am57x:green"; + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + vdd_3v3: fixedregulator-vdd_3v3 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ads7846reg: fixedregulator-ads7846-reg { + compatible = "regulator-fixed"; + regulator-name = "ads7846-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + sound0: sound0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "CL-SOM-AM57x-Sound-Card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Microphone", "Microphone Jack", + "Line", "Line Jack"; + simple-audio-card,routing = + "Headphone Jack", "RHPOUT", + "Headphone Jack", "LHPOUT", + "LLINEIN", "Line Jack", + "MICIN", "Mic Bias", + "Mic Bias", "Microphone Jack"; + + dailink0_master: simple-audio-card,cpu { + sound-dai = <&mcasp3>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8731>; + system-clock-frequency = <12000000>; + }; + }; +}; + +&dra7_pmx_core { + leds_pins_default: leds_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14) /* gpmc_a15.gpio2_5 */ + >; + }; + + i2c1_pins_default: i2c1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */ + DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */ + >; + }; + + i2c3_pins_default: i2c3_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */ + DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */ + >; + }; + + i2c4_pins_default: i2c4_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10) /* mcasp1_acl.i2c4_sda */ + DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10) /* mcasp1_fsr.i2c4_scl */ + >; + }; + + tps659038_pins_default: tps659038_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + qspi1_pins: pinmux_qspi1_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ + DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d0 */ + DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d1 */ + DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ + DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ + DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */ + >; + }; + + cpsw_pins_default: cpsw_pins_default { + pinctrl-single,pins = < + /* Slave at addr 0x0 */ + DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_tclk */ + DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_tctl */ + DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3 */ + DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td2 */ + DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td1 */ + DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td0 */ + DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rclk */ + DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rctl */ + DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd3 */ + DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd2 */ + DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd1 */ + DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd0 */ + + /* Slave at addr 0x1 */ + DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_tclk */ + DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ + DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ + DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ + DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ + DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ + DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ + DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ + DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ + DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ + DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ + DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ + >; + }; + + cpsw_pins_sleep: cpsw_pins_sleep { + pinctrl-single,pins = < + /* Slave 1 */ + DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15) + + /* Slave 2 */ + DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15) + >; + }; + + davinci_mdio_pins_default: davinci_mdio_pins_default { + pinctrl-single,pins = < + /* MDIO */ + DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */ + DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d11.mdio_d */ + >; + }; + + davinci_mdio_pins_sleep: davinci_mdio_pins_sleep { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15) + >; + }; + + ads7846_pins: pinmux_ads7846_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */ + >; + }; + + mcasp3_pins_default: mcasp3_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */ + DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */ + DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */ + DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */ + >; + }; + + mcasp3_pins_sleep: mcasp3_pins_sleep { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15) + DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15) + >; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_default>; + clock-frequency = <400000>; +}; + +&i2c3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_default>; + clock-frequency = <400000>; +}; + +&i2c4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_default>; + clock-frequency = <400000>; + + tps659038: tps659038@58 { + compatible = "ti,tps659038"; + reg = <0x58>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&tps659038_pins_default>; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + tps659038_pmic { + compatible = "ti,tps659038-pmic"; + + regulators { + smps12_reg: smps12 { + /* VDD_MPU */ + regulator-name = "smps12"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps3_reg: smps3 { + /* VDD_DDR */ + regulator-name = "smps3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + /* VDD_DSPEVE */ + regulator-name = "smps45"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6_reg: smps6 { + /* VDD_GPU */ + regulator-name = "smps6"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps7_reg: smps7 { + /* VDD_CORE */ + regulator-name = "smps7"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1160000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8_reg: smps8 { + /* VDD_IVA */ + regulator-name = "smps8"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps9_reg: smps9 { + /* PMIC_3V3 */ + regulator-name = "smps9"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + + ldo1_reg: ldo1 { + /* VDD_SD / VDDSHV8 */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + /* VDD_1V8 */ + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHYA - supplies VDDA_SATA, VDDA_USB1/2/3 */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDA_1V8_PHYB - supplies VDDA_HDMI, VDDA_PCIE/0/1 */ + regulator-name = "ldo4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo9_reg: ldo9 { + /* VDD_RTC */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + /* VDDA_1V8_PLL */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + /* regen1 not used */ + }; + }; + + tps659038_pwr_button: tps659038_pwr_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps659038>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + ti,palmas-long-press-seconds = <12>; + }; + + tps659038_gpio: tps659038_gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + rtc0: rtc@56 { + compatible = "emmicro,em3027"; + reg = <0x56>; + }; + + eeprom_module: atmel@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; + + wm8731: wm8731@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8731"; + reg = <0x1a>; + status = "okay"; + }; +}; + +&cpu0 { + cpu0-supply = <&smps12_reg>; + voltage-tolerance = <1>; +}; + +&sata { + status = "okay"; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; + +&mmc2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default>; + + vmmc-supply = <&vdd_3v3>; + bus-width = <8>; + ti,non-removable; + cap-mmc-dual-data-rate; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi1_pins>; + + spi-max-frequency = <48000000>; + + spi_flash: spi_flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80", "jedec,spi-nor"; + reg = <0>; /* CS0 */ + spi-max-frequency = <48000000>; + + partition@0 { + label = "uboot"; + reg = <0x0 0xc0000>; + }; + + partition@c0000 { + label = "uboot environment"; + reg = <0xc0000 0x40000>; + }; + + partition@100000 { + label = "reserved"; + reg = <0x100000 0x0>; + }; + }; + + /* touch controller */ + ads7846@0 { + pinctrl-names = "default"; + pinctrl-0 = <&ads7846_pins>; + + compatible = "ti,ads7846"; + vcc-supply = <&ads7846reg>; + + reg = <1>; /* CS1 */ + spi-max-frequency = <1500000>; + + interrupt-parent = <&gpio1>; + interrupts = <31 0>; + pendown-gpio = <&gpio1 31 0>; + + + ti,x-min = /bits/ 16 <0x0>; + ti,x-max = /bits/ 16 <0x0fff>; + ti,y-min = /bits/ 16 <0x0>; + ti,y-max = /bits/ 16 <0x0fff>; + + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + + ti,debounce-max = /bits/ 16 <30>; + ti,debounce-tol = /bits/ 16 <10>; + ti,debounce-rep = /bits/ 16 <1>; + + wakeup-source; + }; +}; + +&mac { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_pins_default>; + pinctrl-1 = <&cpsw_pins_sleep>; + dual_emac; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii-txid"; + dual_emac_res_vlan = <0>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "rgmii-txid"; + dual_emac_res_vlan = <1>; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_pins_default>; + pinctrl-1 = <&davinci_mdio_pins_sleep>; +}; + +&usb2_phy1 { + phy-supply = <&ldousb_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldousb_reg>; +}; + +&usb1 { + dr_mode = "host"; +}; + +&usb2 { + dr_mode = "host"; +}; + +&mcasp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp3_pins_default>; + pinctrl-1 = <&mcasp3_pins_sleep>; + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; +}; + +&gpio3 { + status = "okay"; + ti,no-reset-on-init; +}; + +&gpio2 { + status = "okay"; + ti,no-reset-on-init; +}; diff --git a/arch/arm/dts/am57xx-idk-common.dtsi b/arch/arm/dts/am57xx-idk-common.dtsi index 30118ed233..97aa8e6a56 100644 --- a/arch/arm/dts/am57xx-idk-common.dtsi +++ b/arch/arm/dts/am57xx-idk-common.dtsi @@ -47,6 +47,74 @@ regulator-always-on; regulator-boot-on; }; + + leds-iio { + status = "disabled"; + compatible = "gpio-leds"; + led-out0 { + label = "out0"; + gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out1 { + label = "out1"; + gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out2 { + label = "out2"; + gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out3 { + label = "out3"; + gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out4 { + label = "out4"; + gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out5 { + label = "out5"; + gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out6 { + label = "out6"; + gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out7 { + label = "out7"; + gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&dra7_pmx_core { + dcan1_pins_default: dcan1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ + DRA7XX_CORE_IOPAD(0x37d4, PIN_INPUT_PULLUP | MUX_MODE0) /* dcan1_rx */ + >; + }; + + dcan1_pins_sleep: dcan1_pins_sleep { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ + DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP) /* dcan1_rx.off */ + >; + }; };

&i2c1 { @@ -61,6 +129,7 @@ #interrupt-cells = <2>; interrupt-controller; ti,system-power-controller; + ti,palmas-override-powerhold;

tps659038_pmic { compatible = "ti,tps659038-pmic"; @@ -254,6 +323,35 @@ gpio-controller; #gpio-cells = <2>; }; + + extcon_usb2: tps659038_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + /* ID & VBUS GPIOs provided in board dts */ + }; + }; + + tpic2810: tpic2810@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&mcspi3 { + status = "okay"; + ti,pindir-d0-out-d1-in; + + sn65hvs882: sn65hvs882@0 { + compatible = "pisosr-gpio"; + gpio-controller; + #gpio-cells = <2>; + + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; }; };

@@ -298,7 +396,15 @@ };

&usb2 { - dr_mode = "otg"; + dr_mode = "peripheral"; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&v3_3d>; + vqmmc-supply = <&ldo1_reg>; + bus-width = <4>; + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ };

&mmc2 { @@ -309,12 +415,20 @@ max-frequency = <96000000>; };

+&dcan1 { + status = "okay"; + pinctrl-names = "default", "sleep", "active"; + pinctrl-0 = <&dcan1_pins_sleep>; + pinctrl-1 = <&dcan1_pins_sleep>; + pinctrl-2 = <&dcan1_pins_default>; +}; + &qspi { status = "okay";

spi-max-frequency = <76800000>; m25p80@0 { - compatible = "s25fl256s1", "spi-flash", "jedec,spi-nor"; + compatible = "s25fl256s1", "jedec,spi-nor"; spi-max-frequency = <76800000>; reg = <0>; spi-tx-bus-width = <1>; diff --git a/arch/arm/dts/am57xx-sbc-am57x.dts b/arch/arm/dts/am57xx-sbc-am57x.dts new file mode 100644 index 0000000000..31f9be6324 --- /dev/null +++ b/arch/arm/dts/am57xx-sbc-am57x.dts @@ -0,0 +1,179 @@ +/* + * Support for CompuLab SBC-AM57x single board computer + * + * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ + * Author: Dmitry Lifshitz lifshitz@compulab.co.il + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include "am57xx-cl-som-am57x.dts" +#include "compulab-sb-som.dtsi" + +/ { + model = "CompuLab CL-SOM-AM57x on SB-SOM-AM57x"; + compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; + + aliases { + display0 = &lcd0; + display1 = &hdmi; + }; +}; + +&dra7_pmx_core { + uart3_pins_default: uart3_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ + DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ + >; + }; + + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1_sdcd.gpio6_27 */ + DRA7XX_CORE_IOPAD(0x377c, PIN_INPUT | MUX_MODE14) /* mmc1_sdwp.gpio6_28 */ + >; + }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ + >; + }; + + i2c5_pins_default: i2c5_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ + DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ + >; + }; + + lcd_pins_default: lcd_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3564, PIN_OUTPUT | MUX_MODE14) /* vin2a_vsync0.gpio4_0 */ + >; + }; + + hdmi_pins: pinmux_hdmi_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ + DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ + >; + }; + + hdmi_conn_pins: pinmux_hdmi_conn_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT | MUX_MODE14) /* spi1_cs2.gpio7_12 */ + >; + }; +}; + +&uart3 { + status = "okay"; + interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <&dra7_pmx_core 0x3f8>; + + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_default>; +}; + +&mmc1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; + + vmmc-supply = <&ldo1_reg>; + bus-width = <4>; + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; +}; + +&i2c5 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins_default>; + clock-frequency = <400000>; + + eeprom_base: atmel@54 { + compatible = "atmel,24c08"; + reg = <0x54>; + pagesize = <16>; + }; + + pca9555: pca9555@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&dss { + status = "ok"; + + vdda_video-supply = <&ldoln_reg>; + + port { + dpi_lcd_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +&lcd0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins_default>; + + enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH + &gpio4 0 GPIO_ACTIVE_HIGH>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_lcd_out>; + data-lines = <24>; + }; + }; +}; + +&hdmi { + status = "ok"; + vdda-supply = <&ldo4_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + lanes = <1 0 3 2 5 4 7 6>; + }; + }; +}; + +&hdmi_conn { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_conn_pins>; + + hpd-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; +}; diff --git a/arch/arm/dts/dra7-evm-common.dtsi b/arch/arm/dts/dra7-evm-common.dtsi new file mode 100644 index 0000000000..343e95f9a0 --- /dev/null +++ b/arch/arm/dts/dra7-evm-common.dtsi @@ -0,0 +1,258 @@ +/* + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clk/ti-dra7-atl.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart1; + }; + + extcon_usb1: extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; + }; + + sound0: sound0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "DRA7xx-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out", + "Microphone", "Mic Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + sound0_master: simple-audio-card,cpu { + sound-dai = <&mcasp3>; + system-clock-frequency = <5644800>; + }; + + simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&atl_clkin2_ck>; + }; + }; + + leds { + compatible = "gpio-leds"; + led0 { + label = "dra7:usr1"; + gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led1 { + label = "dra7:usr2"; + gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led2 { + label = "dra7:usr3"; + gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led3 { + label = "dra7:usr4"; + gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + USER1 { + label = "btnUser1"; + linux,code = <BTN_0>; + gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>; + }; + + USER2 { + label = "btnUser2"; + linux,code = <BTN_1>; + gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c3 { + status = "okay"; + clock-frequency = <400000>; +}; + +&mcspi1 { + status = "okay"; +}; + +&mcspi2 { + status = "okay"; +}; + +&uart1 { + status = "okay"; + interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <&dra7_pmx_core 0x3e0>; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&qspi { + status = "okay"; + + spi-max-frequency = <76800000>; + m25p80@0 { + compatible = "s25fl256s1"; + spi-max-frequency = <76800000>; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first four physical blocks + * for a valid file to boot and the flash here is + * 64KiB block size. + */ + partition@0 { + label = "QSPI.SPL"; + reg = <0x00000000 0x000010000>; + }; + partition@1 { + label = "QSPI.SPL.backup1"; + reg = <0x00010000 0x00010000>; + }; + partition@2 { + label = "QSPI.SPL.backup2"; + reg = <0x00020000 0x00010000>; + }; + partition@3 { + label = "QSPI.SPL.backup3"; + reg = <0x00030000 0x00010000>; + }; + partition@4 { + label = "QSPI.u-boot"; + reg = <0x00040000 0x00100000>; + }; + partition@5 { + label = "QSPI.u-boot-spl-os"; + reg = <0x00140000 0x00080000>; + }; + partition@6 { + label = "QSPI.u-boot-env"; + reg = <0x001c0000 0x00010000>; + }; + partition@7 { + label = "QSPI.u-boot-env.backup1"; + reg = <0x001d0000 0x0010000>; + }; + partition@8 { + label = "QSPI.kernel"; + reg = <0x001e0000 0x0800000>; + }; + partition@9 { + label = "QSPI.file-system"; + reg = <0x009e0000 0x01620000>; + }; + }; +}; + +&omap_dwc3_1 { + extcon = <&extcon_usb1>; +}; + +&usb1 { + dr_mode = "otg"; + extcon = <&extcon_usb1>; +}; + +&usb2 { + dr_mode = "host"; +}; + +&atl { + assigned-clocks = <&abe_dpll_sys_clk_mux>, + <&atl_gfclk_mux>, + <&dpll_abe_ck>, + <&dpll_abe_m2x2_ck>, + <&atl_clkin2_ck>; + assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; + assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; + + status = "okay"; + + atl2 { + bws = <DRA7_ATL_WS_MCASP2_FSX>; + aws = <DRA7_ATL_WS_MCASP3_FSX>; + }; +}; + +&mcasp3 { + #sound-dai-cells = <0>; + + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&atl_clkin2_ck>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/dts/dra7-evm.dts b/arch/arm/dts/dra7-evm.dts index 4d882ab338..aa426dabb6 100644 --- a/arch/arm/dts/dra7-evm.dts +++ b/arch/arm/dts/dra7-evm.dts @@ -8,24 +8,26 @@ /dts-v1/;

#include "dra74x.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clk/ti-dra7-atl.h> -#include <dt-bindings/input/input.h> +#include "dra7-evm-common.dtsi" +#include "dra74x-mmc-iodelay.dtsi"

/ { model = "TI DRA742"; compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";

- chosen { - stdout-path = &uart1; - tick-timer = &timer2; - }; - memory@0 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */ };

+ evm_1v8_sw: fixedregulator-evm_1v8 { + compatible = "regulator-fixed"; + regulator-name = "evm_1v8"; + vin-supply = <&smps9_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + evm_3v3_sd: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "evm_3v3_sd"; @@ -52,11 +54,6 @@ regulator-max-microvolt = <1800000>; };

- extcon_usb1: extcon_usb1 { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; - }; - extcon_usb2: extcon_usb2 { compatible = "linux,extcon-usb-gpio"; id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; @@ -74,286 +71,9 @@ gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; };

- sound0: sound0 { - compatible = "simple-audio-card"; - simple-audio-card,name = "DRA7xx-EVM"; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Line", "Line Out", - "Microphone", "Mic Jack", - "Line", "Line In"; - simple-audio-card,routing = - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT", - "Line Out", "LLOUT", - "Line Out", "RLOUT", - "MIC3L", "Mic Jack", - "MIC3R", "Mic Jack", - "Mic Jack", "Mic Bias", - "LINE1L", "Line In", - "LINE1R", "Line In"; - simple-audio-card,format = "dsp_b"; - simple-audio-card,bitclock-master = <&sound0_master>; - simple-audio-card,frame-master = <&sound0_master>; - simple-audio-card,bitclock-inversion; - - sound0_master: simple-audio-card,cpu { - sound-dai = <&mcasp3>; - system-clock-frequency = <5644800>; - }; - - simple-audio-card,codec { - sound-dai = <&tlv320aic3106>; - clocks = <&atl_clkin2_ck>; - }; - }; - - leds { - compatible = "gpio-leds"; - led0 { - label = "dra7:usr1"; - gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led1 { - label = "dra7:usr2"; - gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led2 { - label = "dra7:usr3"; - gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - led3 { - label = "dra7:usr4"; - gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - USER1 { - label = "btnUser1"; - linux,code = <BTN_0>; - gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>; - }; - - USER2 { - label = "btnUser2"; - linux,code = <BTN_1>; - gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>; - }; - }; };

&dra7_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&vtt_pin>; - - vtt_pin: pinmux_vtt_pin { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */ - >; - }; - - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */ - DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */ - >; - }; - - i2c2_pins: pinmux_i2c2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ - DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ - >; - }; - - i2c3_pins: pinmux_i2c3_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */ - DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */ - >; - }; - - mcspi1_pins: pinmux_mcspi1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */ - DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */ - DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */ - DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */ - DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */ - DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */ - >; - }; - - mcspi2_pins: pinmux_mcspi2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */ - DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ - DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */ - DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */ - >; - }; - - uart1_pins: pinmux_uart1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */ - DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */ - DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */ - DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */ - >; - }; - - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */ - DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */ - DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */ - DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */ - >; - }; - - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ - DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ - >; - }; - - usb1_pins: pinmux_usb1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ - >; - }; - - usb2_pins: pinmux_usb2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ - >; - }; - - nand_flash_x16: nand_flash_x16 { - /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch - * So NAND flash requires following switch settings: - * SW5.1 (NAND_BOOTn) = ON (LOW) - * SW5.9 (GPMC_WPN) = OFF (HIGH) - */ - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ - DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ - DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ - DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ - DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ - DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ - DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ - DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ - DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ - DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ - DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ - DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ - DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ - DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ - DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ - DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ - DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */ - DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ - DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */ - DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ - DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ - DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */ - >; - }; - - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 1 */ - DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */ - DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */ - DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */ - DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */ - DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */ - DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */ - DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */ - DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */ - DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */ - DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */ - DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */ - DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */ - - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ - DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ - DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ - DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ - DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ - DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ - DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ - DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ - DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ - DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ - DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ - DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ - >; - - }; - - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 1 */ - DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15) - - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15) - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ - DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; - - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15) - >; - }; - dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ @@ -368,41 +88,43 @@ >; };

- atl_pins: pinmux_atl_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ - DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ - >; - }; - - mcasp3_pins: pinmux_mcasp3_pins { + mmc1_pins_default: mmc1_pins_default { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ - DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ - DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ - DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ + DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ >; };

- mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { + mmc2_pins_default: mmc2_pins_default { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15) + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ >; }; };

&i2c1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>;

tps659038: tps659038@58 { compatible = "ti,tps659038"; reg = <0x58>; + ti,palmas-override-powerhold; + ti,system-power-controller;

tps659038_pmic { compatible = "ti,tps659038-pmic"; @@ -566,7 +288,6 @@ interrupts = <11 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; - u-boot,i2c-offset-len = <0>; };

tlv320aic3106: tlv320aic3106@19 { @@ -587,8 +308,6 @@

&i2c2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>;

pcf_hdmi: gpio@26 { @@ -606,156 +325,60 @@ }; };

-&i2c3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; - clock-frequency = <400000>; -}; - -&mcspi1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcspi1_pins>; -}; - -&mcspi2 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcspi2_pins>; -}; - -&uart1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, - <&dra7_pmx_core 0x3e0>; -}; - -&uart2 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; -}; - -&uart3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; -}; - &mmc1 { status = "okay"; vmmc-supply = <&evm_3v3_sd>; - vmmc_aux-supply = <&ldo1_reg>; + vqmmc-supply = <&ldo1_reg>; bus-width = <4>; /* * SDCD signal is not being used here - using the fact that GPIO mode * is always hardwired. */ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>; + pinctrl-7 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>; + pinctrl-8 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; };

&mmc2 { status = "okay"; - vmmc-supply = <&evm_3v3_sw>; + vmmc-supply = <&evm_1v8_sw>; bus-width = <8>; + pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_1_8v_rev11 &mmc2_iodelay_ddr_1_8v_rev11_conf>; + pinctrl-3 = <&mmc2_pins_ddr_rev20>; + pinctrl-4 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev11_conf>; + pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>; };

&cpu0 { cpu0-supply = <&smps123_reg>; };

-&qspi { - status = "okay"; - - spi-max-frequency = <76800000>; - m25p80@0 { - compatible = "s25fl256s1", "spi-flash"; - spi-max-frequency = <76800000>; - reg = <0>; - spi-tx-bus-width = <1>; - spi-rx-bus-width = <4>; - #address-cells = <1>; - #size-cells = <1>; - - /* MTD partition table. - * The ROM checks the first four physical blocks - * for a valid file to boot and the flash here is - * 64KiB block size. - */ - partition@0 { - label = "QSPI.SPL"; - reg = <0x00000000 0x000010000>; - }; - partition@1 { - label = "QSPI.SPL.backup1"; - reg = <0x00010000 0x00010000>; - }; - partition@2 { - label = "QSPI.SPL.backup2"; - reg = <0x00020000 0x00010000>; - }; - partition@3 { - label = "QSPI.SPL.backup3"; - reg = <0x00030000 0x00010000>; - }; - partition@4 { - label = "QSPI.u-boot"; - reg = <0x00040000 0x00100000>; - }; - partition@5 { - label = "QSPI.u-boot-spl-os"; - reg = <0x00140000 0x00080000>; - }; - partition@6 { - label = "QSPI.u-boot-env"; - reg = <0x001c0000 0x00010000>; - }; - partition@7 { - label = "QSPI.u-boot-env.backup1"; - reg = <0x001d0000 0x0010000>; - }; - partition@8 { - label = "QSPI.kernel"; - reg = <0x001e0000 0x0800000>; - }; - partition@9 { - label = "QSPI.file-system"; - reg = <0x009e0000 0x01620000>; - }; - }; -}; - -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - &omap_dwc3_2 { extcon = <&extcon_usb2>; };

-&usb1 { - dr_mode = "peripheral"; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins>; -}; - -&usb2 { - dr_mode = "host"; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_pins>; -}; - &elm { status = "okay"; };

&gpmc { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&nand_flash_x16>; + /* + * For the existing IOdelay configuration via U-Boot we don't + * support NAND on dra7-evm. Keep it disabled. Enabling it + * requires a different configuration by U-Boot. + */ + status = "disabled"; ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { compatible = "ti,omap2-nand"; @@ -764,6 +387,7 @@ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */ + ti,nand-xfer-type = "prefetch-dma"; ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <16>; @@ -851,9 +475,6 @@

&mac { status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cpsw_default>; - pinctrl-1 = <&cpsw_sleep>; dual_emac; };

@@ -869,12 +490,6 @@ dual_emac_res_vlan = <2>; };

-&davinci_mdio { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&davinci_mdio_default>; - pinctrl-1 = <&davinci_mdio_sleep>; -}; - &dcan1 { status = "ok"; pinctrl-names = "default", "sleep", "active"; @@ -883,63 +498,6 @@ pinctrl-2 = <&dcan1_pins_default>; };

-&atl { - pinctrl-names = "default"; - pinctrl-0 = <&atl_pins>; - - assigned-clocks = <&abe_dpll_sys_clk_mux>, - <&atl_gfclk_mux>, - <&dpll_abe_ck>, - <&dpll_abe_m2x2_ck>, - <&atl_clkin2_ck>; - assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; - assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; - +&pcie1_rc { status = "okay"; - - atl2 { - bws = <DRA7_ATL_WS_MCASP2_FSX>; - aws = <DRA7_ATL_WS_MCASP3_FSX>; - }; -}; - -&mcasp3 { - #sound-dai-cells = <0>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&mcasp3_pins>; - pinctrl-1 = <&mcasp3_sleep_pins>; - - assigned-clocks = <&mcasp3_ahclkx_mux>; - assigned-clock-parents = <&atl_clkin2_ck>; - - status = "okay"; - - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - /* 4 serializer */ - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 1 2 0 0 - >; - tx-num-evt = <32>; - rx-num-evt = <32>; -}; - -&mailbox5 { - status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; -}; - -&mailbox6 { - status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { - status = "okay"; - }; }; diff --git a/arch/arm/dts/dra7.dtsi b/arch/arm/dts/dra7.dtsi index 5570e30eb3..02a136a466 100644 --- a/arch/arm/dts/dra7.dtsi +++ b/arch/arm/dts/dra7.dtsi @@ -18,6 +18,7 @@

compatible = "ti,dra7xx"; interrupt-parent = <&crossbar_mpu>; + chosen { };

aliases { i2c0 = &i2c1; @@ -56,7 +57,7 @@ interrupt-controller; #interrupt-cells = <3>; reg = <0x0 0x48211000 0x0 0x1000>, - <0x0 0x48212000 0x0 0x1000>, + <0x0 0x48212000 0x0 0x2000>, <0x0 0x48214000 0x0 0x2000>, <0x0 0x48216000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; @@ -80,11 +81,7 @@ compatible = "arm,cortex-a15"; reg = <0>;

- operating-points = < - /* kHz uV */ - 1000000 1060000 - 1176000 1160000 - >; + operating-points-v2 = <&cpu0_opp_table>;

clocks = <&dpll_mpu_ck>; clock-names = "cpu"; @@ -98,6 +95,24 @@ }; };

+ cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_wkup>; + + opp_nom-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1060000 850000 1150000>; + opp-supported-hw = <0xFF 0x01>; + opp-suspend; + }; + + opp_od-1176000000 { + opp-hz = /bits/ 64 <1176000000>; + opp-microvolt = <1160000 885000 1160000>; + opp-supported-hw = <0xFF 0x02>; + }; + }; + /* * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -171,6 +186,7 @@ reg = <0x1400 0x0468>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <32>; @@ -180,6 +196,7 @@ scm_conf1: scm_conf@1c04 { compatible = "syscon"; reg = <0x1c04 0x0020>; + #syscon-cells = <2>; };

scm_conf_pcie: scm_conf@1c24 { @@ -271,7 +288,11 @@ #address-cells = <1>; ranges = <0x51000000 0x51000000 0x3000 0x0 0x20000000 0x10000000>; - pcie1: pcie@51000000 { + /** + * To enable PCI endpoint mode, disable the pcie1_rc + * node and enable pcie1_ep mode. + */ + pcie1_rc: pcie@51000000 { compatible = "ti,dra7-pcie"; reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; @@ -281,6 +302,7 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x20013000 0x13000 0 0xffed000>; + bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; linux,pci-domain = <0>; @@ -292,12 +314,28 @@ <0 0 0 2 &pcie1_intc 2>, <0 0 0 3 &pcie1_intc 3>, <0 0 0 4 &pcie1_intc 4>; + status = "disabled"; pcie1_intc: interrupt-controller { interrupt-controller; #address-cells = <0>; #interrupt-cells = <1>; }; }; + + pcie1_ep: pcie_ep@51000000 { + compatible = "ti,dra7-pcie-ep"; + reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>; + reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space"; + interrupts = <0 232 0x4>; + num-lanes = <1>; + num-ib-windows = <4>; + num-ob-windows = <16>; + ti,hwmods = "pcie1"; + phys = <&pcie1_phy>; + phy-names = "pcie-phy0"; + ti,syscon-unaligned-access = <&scm_conf1 0x14 2>; + status = "disabled"; + }; };

axi@1 { @@ -317,6 +355,7 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x30013000 0x13000 0 0xffed000>; + bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; linux,pci-domain = <1>; @@ -400,6 +439,14 @@ reg = <0x40d00000 0x100>; };

+ dra7_iodelay_core: padconf@4844a000 { + compatible = "ti,dra7-iodelay"; + reg = <0x4844a000 0x0d1c>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <2>; + }; + sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; @@ -542,7 +589,6 @@ uart1: serial@4806a000 { compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x4806a000 0x100>; - reg-shift = <2>; interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; @@ -554,7 +600,6 @@ uart2: serial@4806c000 { compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x4806c000 0x100>; - reg-shift = <2>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; @@ -566,7 +611,6 @@ uart3: serial@48020000 { compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48020000 0x100>; - reg-shift = <2>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; @@ -578,7 +622,6 @@ uart4: serial@4806e000 { compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x4806e000 0x100>; - reg-shift = <2>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; @@ -590,7 +633,6 @@ uart5: serial@48066000 { compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48066000 0x100>; - reg-shift = <2>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; clock-frequency = <48000000>; @@ -602,7 +644,6 @@ uart6: serial@48068000 { compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48068000 0x100>; - reg-shift = <2>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; clock-frequency = <48000000>; @@ -614,7 +655,6 @@ uart7: serial@48420000 { compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48420000 0x100>; - reg-shift = <2>; interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart7"; clock-frequency = <48000000>; @@ -624,7 +664,6 @@ uart8: serial@48422000 { compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48422000 0x100>; - reg-shift = <2>; interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart8"; clock-frequency = <48000000>; @@ -634,7 +673,6 @@ uart9: serial@48424000 { compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48424000 0x100>; - reg-shift = <2>; interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart9"; clock-frequency = <48000000>; @@ -644,7 +682,6 @@ uart10: serial@4ae2b000 { compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x4ae2b000 0x100>; - reg-shift = <2>; interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart10"; clock-frequency = <48000000>; @@ -1029,6 +1066,7 @@ dma-names = "tx", "rx"; status = "disabled"; pbias-supply = <&pbias_mmc_reg>; + max-frequency = <192000000>; };

mmc2: mmc@480b4000 { @@ -1040,6 +1078,7 @@ dmas = <&sdma_xbar 47>, <&sdma_xbar 48>; dma-names = "tx", "rx"; status = "disabled"; + max-frequency = <192000000>; };

mmc3: mmc@480ad000 { @@ -1051,6 +1090,8 @@ dmas = <&sdma_xbar 77>, <&sdma_xbar 78>; dma-names = "tx", "rx"; status = "disabled"; + /* Errata i887 limits max-frequency of MMC3 to 64 MHz */ + max-frequency = <64000000>; };

mmc4: mmc@480d1000 { @@ -1062,6 +1103,7 @@ dmas = <&sdma_xbar 57>, <&sdma_xbar 58>; dma-names = "tx", "rx"; status = "disabled"; + max-frequency = <192000000>; };

mmu0_dsp1: mmu@40d01000 { @@ -1386,6 +1428,7 @@ phy-names = "sata-phy"; clocks = <&sata_ref_clk>; ti,hwmods = "sata"; + ports-implemented = <0x1>; };

rtc: rtc@48838000 { @@ -1716,13 +1759,11 @@ cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; - no_bd_ram = <0>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; cpts_clock_mult = <0x784CFE14>; cpts_clock_shift = <29>; - syscon = <&scm_conf>; reg = <0x48484000 0x1000 0x48485200 0x2E00>; #address-cells = <1>; @@ -1748,6 +1789,7 @@ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; ranges; + syscon = <&scm_conf>; status = "disabled";

davinci_mdio: mdio@48485000 { @@ -1990,6 +2032,27 @@

&cpu_thermal { polling-delay = <500>; /* milliseconds */ + coefficients = <0 2000>; +}; + +&gpu_thermal { + coefficients = <0 2000>; +}; + +&core_thermal { + coefficients = <0 2000>; +}; + +&dspeve_thermal { + coefficients = <0 2000>; +}; + +&iva_thermal { + coefficients = <0 2000>; +}; + +&cpu_crit { + temperature = <120000>; /* milli Celsius */ };

/include/ "dra7xx-clocks.dtsi" diff --git a/arch/arm/dts/dra71-evm.dts b/arch/arm/dts/dra71-evm.dts index 875116c67f..41c9132eb5 100644 --- a/arch/arm/dts/dra71-evm.dts +++ b/arch/arm/dts/dra71-evm.dts @@ -7,6 +7,7 @@ */

#include "dra72-evm-common.dtsi" +#include "dra72x-mmc-iodelay.dtsi" #include <dt-bindings/net/ti-dp83867.h>

/ { @@ -32,6 +33,16 @@ 3000000 0x1>; };

+ evm_1v8_sw: fixedregulator-evm_1v8 { + compatible = "regulator-fixed"; + regulator-name = "evm_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&lp8732_buck0_reg>; + regulator-always-on; + regulator-boot-on; + }; + poweroff: gpio-poweroff { compatible = "gpio-poweroff"; gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>; @@ -138,6 +149,11 @@ }; };

+&pcf_lcd { + interrupt-parent = <&gpio7>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; +}; + &pcf_gpio_21 { interrupt-parent = <&gpio7>; interrupts = <31 IRQ_TYPE_EDGE_FALLING>; @@ -157,7 +173,24 @@ };

&mmc1 { - vmmc_aux-supply = <&vpo_sd_1v8_3v3>; + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; + vqmmc-supply = <&vpo_sd_1v8_3v3>; +}; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; + pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>; + vmmc-supply = <&evm_1v8_sw>; };

&mac { @@ -168,13 +201,13 @@ };

&cpsw_emac0 { - phy-handle = <&dp83867_0>; + phy_id = <&davinci_mdio>, <2>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <1>; };

&cpsw_emac1 { - phy-handle = <&dp83867_1>; + phy_id = <&davinci_mdio>, <3>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; }; @@ -185,7 +218,8 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; - ti,impedance-control = <0x1f>; + ti,min-output-impedance; + ti,dp83867-rxctrl-strap-quirk; };

dp83867_1: ethernet-phy@3 { @@ -193,7 +227,8 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; - ti,impedance-control = <0x1f>; + ti,min-output-impedance; + ti,dp83867-rxctrl-strap-quirk; }; };

diff --git a/arch/arm/dts/dra72-evm-common.dtsi b/arch/arm/dts/dra72-evm-common.dtsi index c83f87fa79..2e485a13df 100644 --- a/arch/arm/dts/dra72-evm-common.dtsi +++ b/arch/arm/dts/dra72-evm-common.dtsi @@ -20,7 +20,6 @@

chosen { stdout-path = &uart1; - tick-timer = &timer2; };

evm_12v0: fixedregulator-evm12v0 { @@ -221,9 +220,17 @@ status = "okay"; clock-frequency = <400000>;

+ pcf_lcd: gpio@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + pcf_gpio_21: gpio@21 { compatible = "ti,pcf8575", "nxp,pcf8575"; - u-boot,i2c-offset-len = <0>; reg = <0x21>; lines-initial-states = <0x1408>; gpio-controller; @@ -254,7 +261,6 @@

pcf_hdmi: pcf8575@26 { compatible = "ti,pcf8575", "nxp,pcf8575"; - u-boot,i2c-offset-len = <0>; reg = <0x26>; gpio-controller; #gpio-cells = <2>; @@ -287,7 +293,12 @@ };

&gpmc { - status = "okay"; + /* + * For the existing IOdelay configuration via U-Boot we don't + * support NAND on dra72-evm. Keep it disabled. Enabling it + * requires a different configuration by U-Boot. + */ + status = "disabled"; ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { /* To use NAND, DIP switch SW5 must be set like so: @@ -300,6 +311,7 @@ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */ + ti,nand-xfer-type = "prefetch-dma"; ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <16>; @@ -381,7 +393,8 @@ };

&usb1 { - dr_mode = "peripheral"; + dr_mode = "otg"; + extcon = <&extcon_usb1>; };

&usb2 { @@ -407,8 +420,6 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_default>; - - vmmc-supply = <&evm_3v3_sw>; bus-width = <8>; ti,non-removable; max-frequency = <192000000>; @@ -431,7 +442,7 @@

spi-max-frequency = <76800000>; m25p80@0 { - compatible = "s25fl256s1", "spi-flash"; + compatible = "s25fl256s1"; spi-max-frequency = <76800000>; reg = <0>; spi-tx-bus-width = <1>; @@ -552,3 +563,7 @@ status = "okay"; }; }; + +&pcie1_rc { + status = "okay"; +}; diff --git a/arch/arm/dts/dra72-evm-revc.dts b/arch/arm/dts/dra72-evm-revc.dts index bc814f1b4c..bf588d0072 100644 --- a/arch/arm/dts/dra72-evm-revc.dts +++ b/arch/arm/dts/dra72-evm-revc.dts @@ -6,6 +6,7 @@ * published by the Free Software Foundation. */ #include "dra72-evm-common.dtsi" +#include "dra72x-mmc-iodelay.dtsi" #include <dt-bindings/net/ti-dp83867.h>

/ { @@ -15,6 +16,16 @@ device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */ }; + + evm_1v8_sw: fixedregulator-evm_1v8 { + compatible = "regulator-fixed"; + regulator-name = "evm_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&smps4_reg>; + regulator-always-on; + regulator-boot-on; + }; };

&i2c1 { @@ -50,13 +61,13 @@ };

&cpsw_emac0 { - phy-handle = <&dp83867_0>; + phy_id = <&davinci_mdio>, <2>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <1>; };

&cpsw_emac1 { - phy-handle = <&dp83867_1>; + phy_id = <&davinci_mdio>, <3>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; }; @@ -68,6 +79,9 @@ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; ti,min-output-impedance; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + ti,dp83867-rxctrl-strap-quirk; };

dp83867_1: ethernet-phy@3 { @@ -76,5 +90,29 @@ ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; ti,min-output-impedance; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + ti,dp83867-rxctrl-strap-quirk; }; }; + +&mmc1 { + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; + vqmmc-supply = <&ldo1_reg>; +}; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; + pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>; + vmmc-supply = <&evm_1v8_sw>; +}; diff --git a/arch/arm/dts/dra72-evm-tps65917.dtsi b/arch/arm/dts/dra72-evm-tps65917.dtsi index ee6dac44ed..57bfe5caf5 100644 --- a/arch/arm/dts/dra72-evm-tps65917.dtsi +++ b/arch/arm/dts/dra72-evm-tps65917.dtsi @@ -132,3 +132,19 @@ ti,palmas-long-press-seconds = <6>; }; }; + +&usb2_phy1 { + phy-supply = <&ldo4_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldo4_reg>; +}; + +&dss { + vdda_video-supply = <&ldo5_reg>; +}; + +&mmc1 { + vqmmc-supply = <&ldo1_reg>; +}; diff --git a/arch/arm/dts/dra72-evm.dts b/arch/arm/dts/dra72-evm.dts index cd9c4ff126..c572693b16 100644 --- a/arch/arm/dts/dra72-evm.dts +++ b/arch/arm/dts/dra72-evm.dts @@ -6,6 +6,7 @@ * published by the Free Software Foundation. */ #include "dra72-evm-common.dtsi" +#include "dra72x-mmc-iodelay.dtsi" / { model = "TI DRA722";

@@ -13,6 +14,16 @@ device_type = "memory"; reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */ }; + + evm_1v8_sw: fixedregulator-evm_1v8 { + compatible = "regulator-fixed"; + regulator-name = "evm_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&smps4_reg>; + regulator-always-on; + regulator-boot-on; + }; };

&i2c1 { @@ -43,3 +54,24 @@ phy_id = <&davinci_mdio>, <3>; phy-mode = "rgmii"; }; + +&mmc1 { + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50_rev10>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev10_conf>; + vqmmc-supply = <&ldo1_reg>; +}; + +&mmc2 { + pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_rev10>; + pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>; + vmmc-supply = <&evm_1v8_sw>; +}; diff --git a/arch/arm/dts/dra72x-mmc-iodelay.dtsi b/arch/arm/dts/dra72x-mmc-iodelay.dtsi new file mode 100644 index 0000000000..088013c6dc --- /dev/null +++ b/arch/arm/dts/dra72x-mmc-iodelay.dtsi @@ -0,0 +1,350 @@ +/* + * MMC IOdelay values for TI's DRA72x, DRA71x and AM571x SoCs. + * + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Rules for modifying this file: + * a) Update of this file should typically correspond to a datamanual revision. + * Datamanual revision that was used should be updated in comment below. + * If there is no update to datamanual, do not update the values. If you + * need to use values different from that recommended by the datamanual + * for your design, then you should consider adding values to the device- + * -tree file for your board directly. + * b) We keep the mode names as close to the datamanual as possible. So + * if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v, + * we follow that in code too. + * c) If the values change between multiple revisions of silicon, we add + * a revision tag to both the new and old entry. Use 'rev10' for PG 1.0, + * 'rev20' for PG 2.0 and so on. + * d) The node name and node label should be the exact same string. This is + * to curb naming creativity and achieve consistency. + * e) If in future, DRA71x and DRA72x values differ, then add 'dra71_' and + * 'dra72_' tag to entries. Both the new and old entries should gain a tag. + * + * Datamanual Revisions: + * + * AM571x Silicon Revision 2.0: SPRS957D, Revised January 2017 + * AM571x Silicon Revision 1.0: SPRS919M, Revised November 2017 + * DRA71x : SPRS960B, Revised February 2017 + */ + +&dra7_pmx_core { + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr12: mmc1_pins_sdr12 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_hs: mmc1_pins_hs { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr25: mmc1_pins_sdr25 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr50: mmc1_pins_sdr50 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_ddr50_rev10: mmc1_pins_ddr50_rev10 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_clk.mmc1_clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */ + DRA7XX_CORE_IOPAD(0x375C, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */ + >; + }; + + mmc1_pins_ddr50_rev20: mmc1_pins_ddr50_rev20 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr104: mmc1_pins_sdr104 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_hs: mmc2_pins_hs { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_ddr_rev10: mmc2_pins_ddr_rev10 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + >; + }; + + mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_hs200: mmc2_pins_hs200 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; +}; + +&dra7_iodelay_core { + + /* Corresponds to MMC1_MANUAL1 in datamanual */ + mmc1_iodelay_ddr50_conf: mmc1_iodelay_ddr50_conf { + pinctrl-pin-array = < + 0x618 A_DELAY_PS(588) G_DELAY_PS(0) /* CFG_MMC1_CLK_IN */ + 0x624 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_CMD_IN */ + 0x630 A_DELAY_PS(1375) G_DELAY_PS(0) /* CFG_MMC1_DAT0_IN */ + 0x63C A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT1_IN */ + 0x648 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT2_IN */ + 0x654 A_DELAY_PS(1000) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */ + 0x620 A_DELAY_PS(1230) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */ + 0x62C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x638 A_DELAY_PS(56) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */ + 0x644 A_DELAY_PS(76) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x650 A_DELAY_PS(91) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x65C A_DELAY_PS(99) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x64C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + >; + }; + + /* Corresponds to MMC1_MANUAL2 in datamanual */ + mmc1_iodelay_sdr104_rev10_conf: mmc1_iodelay_sdr104_rev10_conf { + pinctrl-pin-array = < + 0x620 A_DELAY_PS(560) G_DELAY_PS(365) /* CFG_MMC1_CLK_OUT */ + 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x638 A_DELAY_PS(29) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */ + 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x650 A_DELAY_PS(47) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x65c A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + 0x628 A_DELAY_PS(125) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x634 A_DELAY_PS(43) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x640 A_DELAY_PS(433) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x64c A_DELAY_PS(287) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x658 A_DELAY_PS(351) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + >; + }; + + /* Corresponds to MMC1_MANUAL2 in datamanual */ + mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf { + pinctrl-pin-array = < + 0x620 A_DELAY_PS(520) G_DELAY_PS(320) /* CFG_MMC1_CLK_OUT */ + 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x638 A_DELAY_PS(40) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */ + 0x644 A_DELAY_PS(83) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x650 A_DELAY_PS(98) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x65c A_DELAY_PS(106) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + 0x628 A_DELAY_PS(51) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x640 A_DELAY_PS(363) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x64c A_DELAY_PS(199) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x658 A_DELAY_PS(273) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + >; + }; + + /* Corresponds to MMC2_MANUAL1 in datamanual */ + mmc2_iodelay_ddr_conf: mmc2_iodelay_ddr_conf { + pinctrl-pin-array = < + 0x18c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_IN */ + 0x1a4 A_DELAY_PS(119) G_DELAY_PS(0) /* CFG_GPMC_A20_IN */ + 0x1b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_IN */ + 0x1bc A_DELAY_PS(18) G_DELAY_PS(0) /* CFG_GPMC_A22_IN */ + 0x1c8 A_DELAY_PS(894) G_DELAY_PS(0) /* CFG_GPMC_A23_IN */ + 0x1d4 A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_GPMC_A24_IN */ + 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */ + 0x1ec A_DELAY_PS(23) G_DELAY_PS(0) /* CFG_GPMC_A26_IN */ + 0x1f8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_IN */ + 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */ + 0x194 A_DELAY_PS(152) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */ + 0x1ac A_DELAY_PS(206) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b8 A_DELAY_PS(78) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1c4 A_DELAY_PS(2) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1d0 A_DELAY_PS(266) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */ + 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1f4 A_DELAY_PS(43) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x368 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + >; + }; + + /* Corresponds to MMC2_MANUAL3 in datamanual */ + mmc2_iodelay_hs200_rev10_conf: mmc2_iodelay_hs200_rev10_conf { + pinctrl-pin-array = < + 0x194 A_DELAY_PS(150) G_DELAY_PS(95) /* CFG_GPMC_A19_OUT */ + 0x1ac A_DELAY_PS(250) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b8 A_DELAY_PS(125) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1c4 A_DELAY_PS(100) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1d0 A_DELAY_PS(870) G_DELAY_PS(415) /* CFG_GPMC_A23_OUT */ + 0x1dc A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e8 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1f4 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x368 A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + 0x190 A_DELAY_PS(695) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x1a8 A_DELAY_PS(924) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1b4 A_DELAY_PS(719) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1c0 A_DELAY_PS(824) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1d8 A_DELAY_PS(877) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1e4 A_DELAY_PS(446) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1f0 A_DELAY_PS(847) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1fc A_DELAY_PS(586) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x364 A_DELAY_PS(1039) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + >; + }; + + /* Corresponds to MMC2_MANUAL3 in datamanual */ + mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf { + pinctrl-pin-array = < + 0x194 A_DELAY_PS(285) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */ + 0x1ac A_DELAY_PS(189) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b8 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_OUT */ + 0x1c4 A_DELAY_PS(0) G_DELAY_PS(70) /* CFG_GPMC_A22_OUT */ + 0x1d0 A_DELAY_PS(730) G_DELAY_PS(360) /* CFG_GPMC_A23_OUT */ + 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1f4 A_DELAY_PS(70) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x368 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_CS1_OUT */ + 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x1a8 A_DELAY_PS(231) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1b4 A_DELAY_PS(39) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1c0 A_DELAY_PS(91) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1d8 A_DELAY_PS(176) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1f0 A_DELAY_PS(101) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x364 A_DELAY_PS(360) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + >; + }; +}; diff --git a/arch/arm/dts/dra72x.dtsi b/arch/arm/dts/dra72x.dtsi index eaca143faa..67107605fb 100644 --- a/arch/arm/dts/dra72x.dtsi +++ b/arch/arm/dts/dra72x.dtsi @@ -12,22 +12,6 @@ / { compatible = "ti,dra722", "ti,dra72", "ti,dra7";

- cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0>; - - /* cooling options */ - cooling-min-level = <0>; - cooling-max-level = <2>; - #cooling-cells = <2>; /* min followed by max */ - }; - }; - pmu { compatible = "arm,cortex-a15-pmu"; interrupt-parent = <&wakeupgen>; @@ -45,3 +29,24 @@ <&dss_video1_clk>; clock-names = "fck", "video1_clk"; }; + +&mailbox5 { + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + ti,mbox-tx = <6 2 2>; + ti,mbox-rx = <4 2 2>; + status = "disabled"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + ti,mbox-tx = <5 2 2>; + ti,mbox-rx = <1 2 2>; + status = "disabled"; + }; +}; + +&mailbox6 { + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + ti,mbox-tx = <6 2 2>; + ti,mbox-rx = <4 2 2>; + status = "disabled"; + }; +}; diff --git a/arch/arm/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/dts/dra74x-mmc-iodelay.dtsi new file mode 100644 index 0000000000..28ebb4eb88 --- /dev/null +++ b/arch/arm/dts/dra74x-mmc-iodelay.dtsi @@ -0,0 +1,647 @@ +/* + * MMC IOdelay values for TI's DRA74x, DRA75x and AM572x SoCs. + * + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Rules for modifying this file: + * a) Update of this file should typically correspond to a datamanual revision. + * Datamanual revision that was used should be updated in comment below. + * If there is no update to datamanual, do not update the values. If you + * need to use values different from that recommended by the datamanual + * for your design, then you should consider adding values to the device- + * -tree file for your board directly. + * b) We keep the mode names as close to the datamanual as possible. So + * if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v, + * we follow that in code too. + * c) If the values change between multiple revisions of silicon, we add + * a revision tag to both the new and old entry. Use 'rev11' for PG 1.1, + * 'rev20' for PG 2.0 and so on. + * d) The node name and node label should be the exact same string. This is + * to curb naming creativity and achieve consistency. + * + * Datamanual Revisions: + * + * AM572x Silicon Revision 2.0: SPRS953B, Revised November 2016 + * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016 + * + */ + +&dra7_pmx_core { + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr12: mmc1_pins_sdr12 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_hs: mmc1_pins_hs { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr25: mmc1_pins_sdr25 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr50: mmc1_pins_sdr50 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_ddr50: mmc1_pins_ddr50 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr104: mmc1_pins_sdr104 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_hs: mmc2_pins_hs { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_ddr_3_3v_rev11: mmc2_pins_ddr_3_3v_rev11 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_ddr_1_8v_rev11: mmc2_pins_ddr_1_8v_rev11 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc2_pins_hs200: mmc2_pins_hs200 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; + + mmc4_pins_default: mmc4_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ + DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ + DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */ + DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */ + DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */ + DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */ + >; + }; + + mmc4_pins_hs: mmc4_pins_hs { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ + DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ + DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */ + DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */ + DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */ + DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */ + >; + }; + + mmc3_pins_default: mmc3_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + >; + }; + + mmc3_pins_hs: mmc3_pins_hs { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + >; + }; + + mmc3_pins_sdr12: mmc3_pins_sdr12 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + >; + }; + + mmc3_pins_sdr25: mmc3_pins_sdr25 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + >; + }; + + mmc3_pins_sdr50: mmc3_pins_sdr50 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */ + DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */ + DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */ + DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */ + DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */ + DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */ + >; + }; + + mmc4_pins_sdr12: mmc4_pins_sdr12 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ + DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ + DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */ + DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */ + DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */ + DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */ + >; + }; + + mmc4_pins_sdr25: mmc4_pins_sdr25 { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */ + DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */ + DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */ + DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */ + DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */ + DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */ + >; + }; +}; + +&dra7_iodelay_core { + + /* Corresponds to MMC1_DDR_MANUAL1 in datamanual */ + mmc1_iodelay_ddr_rev11_conf: mmc1_iodelay_ddr_rev11_conf { + pinctrl-pin-array = < + 0x618 A_DELAY_PS(572) G_DELAY_PS(540) /* CFG_MMC1_CLK_IN */ + 0x620 A_DELAY_PS(1525) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */ + 0x624 A_DELAY_PS(0) G_DELAY_PS(600) /* CFG_MMC1_CMD_IN */ + 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x62c A_DELAY_PS(55) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x630 A_DELAY_PS(403) G_DELAY_PS(120) /* CFG_MMC1_DAT0_IN */ + 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x638 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */ + 0x63c A_DELAY_PS(23) G_DELAY_PS(60) /* CFG_MMC1_DAT1_IN */ + 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x648 A_DELAY_PS(25) G_DELAY_PS(60) /* CFG_MMC1_DAT2_IN */ + 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x654 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */ + 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC1_DDR_MANUAL1 in datamanual */ + mmc1_iodelay_ddr_rev20_conf: mmc1_iodelay_ddr50_rev20_conf { + pinctrl-pin-array = < + 0x618 A_DELAY_PS(1076) G_DELAY_PS(330) /* CFG_MMC1_CLK_IN */ + 0x620 A_DELAY_PS(1271) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */ + 0x624 A_DELAY_PS(722) G_DELAY_PS(0) /* CFG_MMC1_CMD_IN */ + 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x62C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x630 A_DELAY_PS(751) G_DELAY_PS(0) /* CFG_MMC1_DAT0_IN */ + 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x638 A_DELAY_PS(20) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */ + 0x63C A_DELAY_PS(256) G_DELAY_PS(0) /* CFG_MMC1_DAT1_IN */ + 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x648 A_DELAY_PS(263) G_DELAY_PS(0) /* CFG_MMC1_DAT2_IN */ + 0x64C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x654 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */ + 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + 0x65C A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */ + mmc1_iodelay_sdr104_rev11_conf: mmc1_iodelay_sdr104_rev11_conf { + pinctrl-pin-array = < + 0x620 A_DELAY_PS(1063) G_DELAY_PS(17) /* CFG_MMC1_CLK_OUT */ + 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x62c A_DELAY_PS(23) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x638 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */ + 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x644 A_DELAY_PS(2) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */ + mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf { + pinctrl-pin-array = < + 0x620 A_DELAY_PS(600) G_DELAY_PS(400) /* CFG_MMC1_CLK_OUT */ + 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */ + 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */ + 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */ + 0x638 A_DELAY_PS(30) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */ + 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */ + 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */ + 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */ + 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */ + 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */ + 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */ + mmc2_iodelay_hs200_rev11_conf: mmc2_iodelay_hs200_rev11_conf { + pinctrl-pin-array = < + 0x190 A_DELAY_PS(621) G_DELAY_PS(600) /* CFG_GPMC_A19_OEN */ + 0x194 A_DELAY_PS(300) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */ + 0x1a8 A_DELAY_PS(739) G_DELAY_PS(600) /* CFG_GPMC_A20_OEN */ + 0x1ac A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b4 A_DELAY_PS(812) G_DELAY_PS(600) /* CFG_GPMC_A21_OEN */ + 0x1b8 A_DELAY_PS(240) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1c0 A_DELAY_PS(954) G_DELAY_PS(600) /* CFG_GPMC_A22_OEN */ + 0x1c4 A_DELAY_PS(60) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1d0 A_DELAY_PS(1340) G_DELAY_PS(420) /* CFG_GPMC_A23_OUT */ + 0x1d8 A_DELAY_PS(935) G_DELAY_PS(600) /* CFG_GPMC_A24_OEN */ + 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e4 A_DELAY_PS(525) G_DELAY_PS(600) /* CFG_GPMC_A25_OEN */ + 0x1e8 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1f0 A_DELAY_PS(767) G_DELAY_PS(600) /* CFG_GPMC_A26_OEN */ + 0x1f4 A_DELAY_PS(225) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x1fc A_DELAY_PS(565) G_DELAY_PS(600) /* CFG_GPMC_A27_OEN */ + 0x200 A_DELAY_PS(60) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x364 A_DELAY_PS(969) G_DELAY_PS(600) /* CFG_GPMC_CS1_OEN */ + 0x368 A_DELAY_PS(180) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + >; + }; + + /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */ + mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf { + pinctrl-pin-array = < + 0x190 A_DELAY_PS(274) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x194 A_DELAY_PS(162) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */ + 0x1a8 A_DELAY_PS(401) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1ac A_DELAY_PS(73) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b4 A_DELAY_PS(465) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1b8 A_DELAY_PS(115) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1c0 A_DELAY_PS(633) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1c4 A_DELAY_PS(47) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1d0 A_DELAY_PS(935) G_DELAY_PS(280) /* CFG_GPMC_A23_OUT */ + 0x1d8 A_DELAY_PS(621) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e4 A_DELAY_PS(183) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1e8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1f0 A_DELAY_PS(467) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1f4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x1fc A_DELAY_PS(262) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x200 A_DELAY_PS(46) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x364 A_DELAY_PS(684) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + 0x368 A_DELAY_PS(76) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + >; + }; + + /* Correspnds to MMC2_DDR_3V3_MANUAL1 in datamanual */ + mmc2_iodelay_ddr_3_3v_rev11_conf: mmc2_iodelay_ddr_3_3v_rev11_conf { + pinctrl-pin-array = < + 0x18c A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A19_IN */ + 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x194 A_DELAY_PS(174) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */ + 0x1a4 A_DELAY_PS(265) G_DELAY_PS(360) /* CFG_GPMC_A20_IN */ + 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1ac A_DELAY_PS(168) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b0 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_IN */ + 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1b8 A_DELAY_PS(136) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1bc A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A22_IN */ + 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1c4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1c8 A_DELAY_PS(287) G_DELAY_PS(420) /* CFG_GPMC_A23_IN */ + 0x1d0 A_DELAY_PS(879) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */ + 0x1d4 A_DELAY_PS(144) G_DELAY_PS(240) /* CFG_GPMC_A24_IN */ + 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */ + 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1e8 A_DELAY_PS(34) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1ec A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A26_IN */ + 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1f4 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x1f8 A_DELAY_PS(120) G_DELAY_PS(180) /* CFG_GPMC_A27_IN */ + 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */ + 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + 0x368 A_DELAY_PS(11) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + >; + }; + + /* Corresponds to MMC2_DDR_1V8_MANUAL1 in datamanual */ + mmc2_iodelay_ddr_1_8v_rev11_conf: mmc2_iodelay_ddr_1_8v_rev11_conf { + pinctrl-pin-array = < + 0x18c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_IN */ + 0x190 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */ + 0x194 A_DELAY_PS(174) G_DELAY_PS(0) /* CFG_GPMC_A19_OUT */ + 0x1a4 A_DELAY_PS(274) G_DELAY_PS(240) /* CFG_GPMC_A20_IN */ + 0x1a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */ + 0x1ac A_DELAY_PS(168) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */ + 0x1b0 A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A21_IN */ + 0x1b4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */ + 0x1b8 A_DELAY_PS(136) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */ + 0x1bc A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A22_IN */ + 0x1c0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */ + 0x1c4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */ + 0x1c8 A_DELAY_PS(514) G_DELAY_PS(360) /* CFG_GPMC_A23_IN */ + 0x1d0 A_DELAY_PS(879) G_DELAY_PS(0) /* CFG_GPMC_A23_OUT */ + 0x1d4 A_DELAY_PS(187) G_DELAY_PS(120) /* CFG_GPMC_A24_IN */ + 0x1d8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */ + 0x1dc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */ + 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */ + 0x1e4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */ + 0x1e8 A_DELAY_PS(34) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */ + 0x1ec A_DELAY_PS(0) G_DELAY_PS(60) /* CFG_GPMC_A26_IN */ + 0x1f0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */ + 0x1f4 A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */ + 0x1f8 A_DELAY_PS(121) G_DELAY_PS(60) /* CFG_GPMC_A27_IN */ + 0x1fc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */ + 0x200 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */ + 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */ + 0x364 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */ + 0x368 A_DELAY_PS(11) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */ + >; + }; + + /* Corresponds to MMC3_MANUAL1 in datamanual */ + mmc3_iodelay_manual1_rev20_conf: mmc3_iodelay_manual1_conf { + pinctrl-pin-array = < + 0x678 A_DELAY_PS(0) G_DELAY_PS(386) /* CFG_MMC3_CLK_IN */ + 0x680 A_DELAY_PS(605) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */ + 0x684 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */ + 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */ + 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */ + 0x690 A_DELAY_PS(171) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */ + 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */ + 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */ + 0x69c A_DELAY_PS(221) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */ + 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */ + 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */ + 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */ + 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */ + 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */ + 0x6b4 A_DELAY_PS(474) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */ + 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */ + 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC3_MANUAL1 in datamanual */ + mmc3_iodelay_manual1_rev11_conf: mmc3_iodelay_manual1_conf { + pinctrl-pin-array = < + 0x678 A_DELAY_PS(406) G_DELAY_PS(0) /* CFG_MMC3_CLK_IN */ + 0x680 A_DELAY_PS(659) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */ + 0x684 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */ + 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */ + 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */ + 0x690 A_DELAY_PS(130) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */ + 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */ + 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */ + 0x69c A_DELAY_PS(169) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */ + 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */ + 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */ + 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */ + 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */ + 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */ + 0x6b4 A_DELAY_PS(457) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */ + 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */ + 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */ + >; + }; + + /* Corresponds to MMC4_DS_MANUAL1 in datamanual */ + mmc4_iodelay_ds_rev11_conf: mmc4_iodelay_ds_rev11_conf { + pinctrl-pin-array = < + 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */ + 0x848 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */ + 0x84c A_DELAY_PS(96) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */ + 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */ + 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */ + 0x870 A_DELAY_PS(582) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */ + 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */ + 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */ + 0x87c A_DELAY_PS(391) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */ + 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */ + 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */ + 0x888 A_DELAY_PS(561) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */ + 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */ + 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */ + 0x894 A_DELAY_PS(588) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */ + 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */ + 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */ + >; + }; + + /* Corresponds to MMC4_DS_MANUAL1 in datamanual */ + mmc4_iodelay_ds_rev20_conf: mmc4_iodelay_ds_rev20_conf { + pinctrl-pin-array = < + 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */ + 0x848 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */ + 0x84c A_DELAY_PS(307) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */ + 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */ + 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */ + 0x870 A_DELAY_PS(785) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */ + 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */ + 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */ + 0x87c A_DELAY_PS(613) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */ + 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */ + 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */ + 0x888 A_DELAY_PS(683) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */ + 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */ + 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */ + 0x894 A_DELAY_PS(835) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */ + 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */ + 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */ + >; + }; + + /* Corresponds to MMC4_MANUAL1 in datamanual */ + mmc4_iodelay_sdr12_hs_sdr25_rev11_conf: mmc4_iodelay_sdr12_hs_sdr25_rev11_conf { + pinctrl-pin-array = < + 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */ + 0x848 A_DELAY_PS(2651) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */ + 0x84c A_DELAY_PS(1572) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */ + 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */ + 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */ + 0x870 A_DELAY_PS(1913) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */ + 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */ + 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */ + 0x87c A_DELAY_PS(1721) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */ + 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */ + 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */ + 0x888 A_DELAY_PS(1891) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */ + 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */ + 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */ + 0x894 A_DELAY_PS(1919) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */ + 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */ + 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */ + >; + }; + + /* Corresponds to MMC4_MANUAL1 in datamanual */ + mmc4_iodelay_sdr12_hs_sdr25_rev20_conf: mmc4_iodelay_sdr12_hs_sdr25_rev20_conf { + pinctrl-pin-array = < + 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */ + 0x848 A_DELAY_PS(1147) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */ + 0x84c A_DELAY_PS(1834) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */ + 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */ + 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */ + 0x870 A_DELAY_PS(2165) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */ + 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */ + 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */ + 0x87c A_DELAY_PS(1929) G_DELAY_PS(64) /* CFG_UART2_RTSN_IN */ + 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */ + 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */ + 0x888 A_DELAY_PS(1935) G_DELAY_PS(128) /* CFG_UART2_RXD_IN */ + 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */ + 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */ + 0x894 A_DELAY_PS(2172) G_DELAY_PS(44) /* CFG_UART2_TXD_IN */ + 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */ + 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */ + >; + }; +}; diff --git a/arch/arm/dts/dra74x.dtsi b/arch/arm/dts/dra74x.dtsi index fa995d0ca1..24e6746c5b 100644 --- a/arch/arm/dts/dra74x.dtsi +++ b/arch/arm/dts/dra74x.dtsi @@ -13,34 +13,11 @@ compatible = "ti,dra742", "ti,dra74", "ti,dra7";

cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0>; - - operating-points = < - /* kHz uV */ - 1000000 1060000 - 1176000 1160000 - >; - - clocks = <&dpll_mpu_ck>; - clock-names = "cpu"; - - clock-latency = <300000>; /* From omap-cpufreq driver */ - - /* cooling options */ - cooling-min-level = <0>; - cooling-max-level = <2>; - #cooling-cells = <2>; /* min followed by max */ - }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; + operating-points-v2 = <&cpu0_opp_table>; }; };

@@ -52,6 +29,11 @@ };

ocp { + dsp2_system: dsp_system@41500000 { + compatible = "syscon"; + reg = <0x41500000 0x100>; + }; + omap_dwc3_4: omap_dwc3_4@48940000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss4"; @@ -65,21 +47,49 @@ usb4: usb@48950000 { compatible = "snps,dwc3"; reg = <0x48950000 0x17000>; - interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; - tx-fifo-resize; + interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; maximum-speed = "high-speed"; dr_mode = "otg"; }; }; + + mmu0_dsp2: mmu@41501000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x41501000 0x100>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmu0_dsp2"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp2_system 0x0>; + status = "disabled"; + }; + + mmu1_dsp2: mmu@41502000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x41502000 0x100>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmu1_dsp2"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp2_system 0x1>; + status = "disabled"; + }; }; };

+&cpu0_opp_table { + opp-shared; +}; + &dss { reg = <0x58000000 0x80>, <0x58004054 0x4>, <0x58004300 0x20>, - <0x58005054 0x4>, - <0x58005300 0x20>; + <0x58009054 0x4>, + <0x58009300 0x20>; reg-names = "dss", "pll1_clkctrl", "pll1", "pll2_clkctrl", "pll2";

@@ -88,3 +98,29 @@ <&dss_video2_clk>; clock-names = "fck", "video1_clk", "video2_clk"; }; + +&mailbox5 { + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + ti,mbox-tx = <6 2 2>; + ti,mbox-rx = <4 2 2>; + status = "disabled"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + ti,mbox-tx = <5 2 2>; + ti,mbox-rx = <1 2 2>; + status = "disabled"; + }; +}; + +&mailbox6 { + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + ti,mbox-tx = <6 2 2>; + ti,mbox-rx = <4 2 2>; + status = "disabled"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + ti,mbox-tx = <5 2 2>; + ti,mbox-rx = <1 2 2>; + status = "disabled"; + }; +}; diff --git a/arch/arm/dts/dra76-evm.dts b/arch/arm/dts/dra76-evm.dts new file mode 100644 index 0000000000..b024a65c6e --- /dev/null +++ b/arch/arm/dts/dra76-evm.dts @@ -0,0 +1,423 @@ +/* + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra76x.dtsi" +#include "dra7-evm-common.dtsi" +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "TI DRA762 EVM"; + compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + vsys_12v0: fixedregulator-vsys12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "vsys_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_5v0: fixedregulator-vsys5v0 { + /* Output of Cntlr B of TPS43351-Q1 on dra76-evm */ + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vsys_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: fixedregulator-vsys3v3 { + /* Output of Cntlr A of TPS43351-Q1 on dra76-evm */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + vio_3v3: fixedregulator-vio_3v3 { + compatible = "regulator-fixed"; + regulator-name = "vio_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + regulator-boot-on; + }; + + vio_3v3_sd: fixedregulator-sd { + compatible = "regulator-fixed"; + regulator-name = "vio_3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vio_3v3>; + enable-active-high; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + }; + + vio_1v8: fixedregulator-vio_1v8 { + compatible = "regulator-fixed"; + regulator-name = "vio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&smps5_reg>; + }; + + vtt_fixed: fixedregulator-vtt { + compatible = "regulator-fixed"; + regulator-name = "vtt_fixed"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + regulator-boot-on; + }; + + aic_dvdd: fixedregulator-aic_dvdd { + /* TPS77018DBVT */ + compatible = "regulator-fixed"; + regulator-name = "aic_dvdd"; + vin-supply = <&vio_3v3>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; +}; + +&dra7_pmx_core { + mmc1_pins_default: mmc1_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc1_pins_sdr12: pinmux_mmc1_sdr12_pins { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ + DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ + DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ + DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ + DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ + DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ + >; + }; + + mmc2_pins_default: mmc2_pins_default { + pinctrl-single,pins = < + DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ + DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ + DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ + DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ + DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ + DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ + DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ + DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ + DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ + DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ + >; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + tps65917: tps65917@58 { + compatible = "ti,tps65917"; + reg = <0x58>; + ti,system-power-controller; + interrupt-controller; + #interrupt-cells = <2>; + + tps65917_pmic { + compatible = "ti,tps65917-pmic"; + + smps12-in-supply = <&vsys_3v3>; + smps3-in-supply = <&vsys_3v3>; + smps4-in-supply = <&vsys_3v3>; + smps5-in-supply = <&vsys_3v3>; + ldo1-in-supply = <&vsys_3v3>; + ldo2-in-supply = <&vsys_3v3>; + ldo3-in-supply = <&vsys_5v0>; + ldo4-in-supply = <&vsys_5v0>; + ldo5-in-supply = <&vsys_3v3>; + + tps65917_regulators: regulators { + smps12_reg: smps12 { + /* VDD_DSPEVE */ + regulator-name = "smps12"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps3_reg: smps3 { + /* VDD_CORE */ + regulator-name = "smps3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + + smps4_reg: smps4 { + /* VDD_IVA */ + regulator-name = "smps4"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps5_reg: smps5 { + /* VDDS1V8 */ + regulator-name = "smps5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> VDA_PHY1_1V8 */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-bypass; + }; + + ldo2_reg: ldo2 { + /* LDO2_OUT --> VDA_PHY2_1V8 */ + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-bypass; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + /* VDA_USB_3V3 */ + regulator-name = "ldo3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PLL */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDD_SDIO_DV */ + regulator-name = "ldo4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps65917_power_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps65917>; + interrupts = <1 IRQ_TYPE_NONE>; + wakeup-source; + ti,palmas-long-press-seconds = <6>; + }; + }; + + lp87565: lp87565@60 { + compatible = "ti,lp87565-q1"; + reg = <0x60>; + + buck10-in-supply =<&vsys_3v3>; + buck23-in-supply =<&vsys_3v3>; + + regulators: regulators { + buck10_reg: buck10 { + /*VDD_MPU*/ + regulator-name = "buck10"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + buck23_reg: buck23 { + /* VDD_GPU*/ + regulator-name = "buck23"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + pcf_lcd: pcf8757@20 { + compatible = "ti,pcf8575", "nxp,pcf8575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + }; + + pcf_gpio_21: pcf8757@21 { + compatible = "ti,pcf8575", "nxp,pcf8575"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcf_hdmi: pcf8575@26 { + compatible = "ti,pcf8575", "nxp,pcf8575"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + p1 { + /* vin6_sel_s0: high: VIN6, low: audio */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "vin6_sel_s0"; + }; + }; + + tlv320aic3106: tlv320aic3106@19 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x19>; + adc-settle-ms = <40>; + ai3x-micbias-vg = <1>; /* 2.0V */ + status = "okay"; + + /* Regulators */ + AVDD-supply = <&vio_3v3>; + IOVDD-supply = <&vio_3v3>; + DRVDD-supply = <&vio_3v3>; + DVDD-supply = <&aic_dvdd>; + }; +}; + +&cpu0 { + vdd-supply = <&buck10_reg>; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vio_3v3_sd>; + vmmc_aux-supply = <&ldo4_reg>; + bus-width = <4>; + /* + * SDCD signal is not being used here - using the fact that GPIO mode + * is always hardwired. + */ + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_default>; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&vio_1v8>; + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_default>; +}; + +/* No RTC on this device */ +&rtc { + status = "disabled"; +}; + +&mac { + status = "okay"; + + dual_emac; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <2>; + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <3>; + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + dp83867_0: ethernet-phy@2 { + reg = <2>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-impedance; + ti,dp83867-rxctrl-strap-quirk; + }; + + dp83867_1: ethernet-phy@3 { + reg = <3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-impedance; + ti,dp83867-rxctrl-strap-quirk; + }; +}; + +&usb2_phy1 { + phy-supply = <&ldo3_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldo3_reg>; +}; + +&qspi { + spi-max-frequency = <96000000>; + m25p80@0 { + spi-max-frequency = <96000000>; + }; +}; diff --git a/arch/arm/dts/dra76x.dtsi b/arch/arm/dts/dra76x.dtsi new file mode 100644 index 0000000000..1c88c581ff --- /dev/null +++ b/arch/arm/dts/dra76x.dtsi @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "dra74x.dtsi" + +/ { + compatible = "ti,dra762", "ti,dra7"; + +}; + +/* MCAN interrupts are hard-wired to irqs 67, 68 */ +&crossbar_mpu { + ti,irqs-skip = <10 67 68 133 139 140>; +}; diff --git a/arch/arm/dts/dra7xx-clocks.dtsi b/arch/arm/dts/dra7xx-clocks.dtsi index 3330738e4c..cf229dfabf 100644 --- a/arch/arm/dts/dra7xx-clocks.dtsi +++ b/arch/arm/dts/dra7xx-clocks.dtsi @@ -338,6 +338,8 @@ compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>; reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>; + assigned-clocks = <&dpll_dsp_ck>; + assigned-clock-rates = <600000000>; };

dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 { @@ -349,6 +351,8 @@ reg = <0x0244>; ti,index-starts-at-one; ti,invert-autoidle-bit; + assigned-clocks = <&dpll_dsp_m2_ck>; + assigned-clock-rates = <600000000>; };

iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { @@ -372,6 +376,8 @@ compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; + assigned-clocks = <&dpll_iva_ck>; + assigned-clock-rates = <1165000000>; };

dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 { @@ -383,6 +389,8 @@ reg = <0x01b0>; ti,index-starts-at-one; ti,invert-autoidle-bit; + assigned-clocks = <&dpll_iva_m2_ck>; + assigned-clock-rates = <388333334>; };

iva_dclk: iva_dclk { @@ -406,6 +414,8 @@ compatible = "ti,omap4-dpll-clock"; clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>; reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>; + assigned-clocks = <&dpll_gpu_ck>; + assigned-clock-rates = <1277000000>; };

dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 { @@ -417,6 +427,8 @@ reg = <0x02e8>; ti,index-starts-at-one; ti,invert-autoidle-bit; + assigned-clocks = <&dpll_gpu_m2_ck>; + assigned-clock-rates = <425666667>; };

dpll_core_m2_ck: dpll_core_m2_ck@130 { @@ -659,6 +671,8 @@ reg = <0x0248>; ti,index-starts-at-one; ti,invert-autoidle-bit; + assigned-clocks = <&dpll_dsp_m3x2_ck>; + assigned-clock-rates = <400000000>; };

dpll_gmac_x2_ck: dpll_gmac_x2_ck { @@ -791,6 +805,8 @@ clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>; ti,bit-shift = <24>; reg = <0x0520>; + assigned-clocks = <&ipu1_gfclk_mux>; + assigned-clock-parents = <&dpll_core_h22x2_ck>; };

mcasp1_ahclkr_mux: mcasp1_ahclkr_mux@550 { @@ -1748,6 +1764,8 @@ clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; ti,bit-shift = <24>; reg = <0x1220>; + assigned-clocks = <&gpu_core_gclk_mux>; + assigned-clock-parents = <&dpll_gpu_m2_ck>; };

gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 { @@ -1756,6 +1774,8 @@ clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; ti,bit-shift = <26>; reg = <0x1220>; + assigned-clocks = <&gpu_hyd_gclk_mux>; + assigned-clock-parents = <&dpll_gpu_m2_ck>; };

l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 { diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h index 5c75e80915..18ec5df5a5 100644 --- a/include/dt-bindings/pinctrl/dra.h +++ b/include/dt-bindings/pinctrl/dra.h @@ -73,5 +73,8 @@ */ #define DRA7XX_CORE_IOPAD(pa, val) (((pa) & 0xffff) - 0x3400) (val)

+/* DRA7 IODELAY configuration parameters */ +#define A_DELAY_PS(val) ((val) & 0xffff) +#define G_DELAY_PS(val) ((val) & 0xffff) #endif