19 Nov
2010
19 Nov
'10
8:28 a.m.
On 11/19/2010 07:44 AM, Jason Liu wrote:
I think you are right. I did not have the mx27 board to do test. Thanks for test.
I only test it on mx51babbage board, the following is the output:
Net: got MAC address from fuse: 00:04:9f:00:f7:78 which is the same as the MAC address programmed on the board.
Do you have any other comments about this patch?
As I have not seen any other comments in the ML, I have tried to apply the patch and to test myself. From my point of view we have to be sure that the patch is working for all supported processors, and I can test it for i.MX27. As you already test it on i.MX51, can you test it on i.MX25 ? Or at least check with tracing if the address is correct for this processor, too ?
Best regards, Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de
=====================================================================