On Wed, Mar 20, 2019 at 11:05 PM Peter Robinson pbrobinson@gmail.com wrote:
On Fri, Mar 8, 2019 at 6:34 PM Jagan Teki jagan@amarulasolutions.com wrote:
On Fri, Mar 8, 2019 at 11:32 PM Peter Robinson pbrobinson@gmail.com wrote:
Hey Tom and Jagan,
Hey all,
So it's release day and I've put up v2019.04-rc3, I've updated git and the tarballs are also up now.
Thanks again to having signed tags, between -rc2 and -rc3 we have a good changelog under 'git log --merges v2019.04-rc2..v2019.04-rc3'
We're looking at release on April 8th, 2019.
I've had reports of crashes on AllWinner A20 devices, at least Cubieboard2, CubieTruck and BananaPi, with rc2/rc3 (I'm not 100% sure when it started) in Fedora. I'm suspecting some of the DM migration here.
Are either of you aware of any issues there?
Crash below.
Regards, Peter
U-Boot SPL 2019.04-rc3 (Mar 05 2019 - 14:49:53 +0000) DRAM: 2048 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1
U-Boot 2019.04-rc3 (Mar 05 2019 - 14:49:53 +0000) Allwinner Technology
CPU: Allwinner A20 (SUN7I) Model: Cubietech Cubietruck I2C: ready DRAM: 2 GiB MMC: mmc@1c0f000: 0, mmc@1c12000: 1 Loading Environment from FAT... ** No valid partitions found ** Setting up a 1024x768 vga console (overscan 0x0) In: serial Out: vga Err: vga Allwinner mUSB OTG (Peripheral) SCSI: Target spinup took 0 ms. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: sunxi_set_gate: (CLK#66) unhandled eth0: ethernet@1c50000 Warning: usb_ether using MAC address from ROM , eth1: usb_ether starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found scanning bus 3 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device ** Invalid partition 1 **
are you sure, your sd has partitions?
Can you switch mmc dev and check the contents, mean while I can try it on A20 later tomorrow.
Hi Jagan,
Did you get a chance to test this? We've seen this on at least Cubie2, CubieTruck and BananaPi and it still persists with rc4
I made a quick test on v2019.01 vs v2019.04-rc3, below are the results. I even grab the reg dump for your information. please check the same.
U-Boot 2019.04-rc3-00065-g8cafb42fb7 (Mar 21 2019 - 12:42:33 +0530) Allwinner Technology
CPU: Allwinner A20 (SUN7I) Model: LeMaker Banana Pi I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0 Loading Environment from FAT... *** Warning - bad CRC, using default environment
Selecting environment with bad CRC Setting up a 720x576i composite-pal console (overscan 32x20) In: serial Out: vga Err: vga SCSI: SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: sunxi_set_gate: (CLK#66) unhandled eth0: ethernet@1c50000 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found scanning bus 3 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 => => mmc dev 0 switch to partitions #0, OK mmc0 is current device => fatls mmc 0:1 3945128 zImage 26934 sun7i-a20-bananapi-m1-plus.dtb extlinux/
2 file(s), 1 dir(s) => md 0x1c0f000 01c0f000: 80000000 00010000 ffffff40 00000001 ........@....... 01c0f010: 00000200 00000800 00003352 00000904 ........R3...... 01c0f020: 00000900 00000b00 5b590000 400e0032 ..........Y[2..@ 01c0f030: c0000000 00000000 00000000 00006106 .............a.. 01c0f040: 000f0000 00000000 00000800 00000800 ................ 01c0f050: 00000000 00000000 00000000 00000000 ................ 01c0f060: 00000000 00000000 00000000 00000000 ................ 01c0f070: 00000000 00000000 00000000 00000000 ................ 01c0f080: 00000000 00000000 00000000 00000000 ................ 01c0f090: 00000000 00000000 00000000 00000000 ................ 01c0f0a0: 00000000 00000000 00000000 00000000 ................ 01c0f0b0: 00000000 00000000 00000000 00000000 ................ 01c0f0c0: 00000000 00000000 00000000 00000000 ................ 01c0f0d0: 00000000 00000000 00000000 00000000 ................ 01c0f0e0: 00000000 00000000 00000000 00000000 ................ 01c0f0f0: 00000000 00000000 00000000 00000000 ................ => md 0x1c20000 01c20000: a1005310 0a10101e 08100010 00000000 .S.............. 01c20010: 80008009 00000000 21009911 00000000 ...........!.... 01c20020: b1049291 1488801a a100d911 00000000 ................ 01c20030: 0010d063 00000000 00000000 00000000 c............... 01c20040: 21009911 00000000 00000000 00000000 ...!............ 01c20050: 00138013 00020112 00000000 00000000 ................ 01c20060: 0200c15e 00021014 00000020 00010001 ^....... ....... 01c20070: 00000000 00000000 00000000 00000000 ................ 01c20080: 00000000 00000000 8140030b 00000000 ..........@..... 01c20090: 00000000 00000000 00000000 00000000 ................ 01c200a0: 00000000 00000000 00000000 00000000 ................ 01c200b0: 00000000 00000000 00000000 00030000 ................ 01c200c0: 00010000 0000001f 00000000 000001c6 ................ 01c200d0: 80000000 00000000 00000000 00000000 ................ 01c200e0: 00000000 00000000 00000000 00000000 ................ 01c200f0: 00000000 00000000 00000000 00000000 ................
U-Boot 2019.01 (Mar 21 2019 - 12:38:13 +0530) Allwinner Technology
CPU: Allwinner A20 (SUN7I) Model: LeMaker Banana Pi I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 Loading Environment from FAT... *** Warning - bad CRC, using default environment
Setting up a 720x576i composite-pal console (overscan 32x20) In: serial Out: vga Err: vga SCSI: SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: eth0: ethernet@1c50000 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 => => md 0x1c0f000 01c0f000: 80000000 00010000 ffffff40 00000001 ........@....... 01c0f010: 00000200 00000800 00003352 00000904 ........R3...... 01c0f020: 00000900 00000b00 5b590000 400e0032 ..........Y[2..@ 01c0f030: c0000000 00000000 00000000 00006106 .............a.. 01c0f040: 000f0000 00000000 00000800 00000800 ................ 01c0f050: 00000000 00000000 00000000 00000000 ................ 01c0f060: 00000000 00000000 00000000 00000000 ................ 01c0f070: 00000000 00000000 00000000 00000000 ................ 01c0f080: 00000000 00000000 00000000 00000000 ................ 01c0f090: 00000000 00000000 00000000 00000000 ................ 01c0f0a0: 00000000 00000000 00000000 00000000 ................ 01c0f0b0: 00000000 00000000 00000000 00000000 ................ 01c0f0c0: 00000000 00000000 00000000 00000000 ................ 01c0f0d0: 00000000 00000000 00000000 00000000 ................ 01c0f0e0: 00000000 00000000 00000000 00000000 ................ 01c0f0f0: 00000000 00000000 00000000 00000000 ................ => md 0x1c20000 01c20000: a1005310 0a10101e 08100010 00000000 .S.............. 01c20010: 80008009 00000000 21009911 00000000 ...........!.... 01c20020: b1049291 1488801a a100d911 00000000 ................ 01c20030: 0010d063 00000000 00000000 00000000 c............... 01c20040: 21009911 00000000 00000000 00000000 ...!............ 01c20050: 00138013 00020112 00000000 00000000 ................ 01c20060: 0200c15e 00021014 00000020 00010001 ^....... ....... 01c20070: 00000000 00000000 00000000 00000000 ................ 01c20080: 00000000 00000000 8140030b 00000000 ..........@..... 01c20090: 00000000 00000000 00000000 00000000 ................ 01c200a0: 00000000 00000000 00000000 00000000 ................ 01c200b0: 00000000 00000000 00000000 00030000 ................ 01c200c0: 00010000 0000001f 00000000 000000c6 ................ 01c200d0: 80000000 00000000 00000000 00000000 ................ 01c200e0: 00000000 00000000 00000000 00000000 ................ 01c200f0: 00000000 00000000 00000000 00000000 ................
Jagan.