Apollon BSP support (take #2)
The Apollon based on OMAP2420 is designed for OneNAND development. It's similar with OMAP2420 H4 except some peripherals.
Now this board is maintained at mainline kernel.
Signed-off-by: Kyungmin Park kyungmin.park@samsung.com --- diff --git a/board/apollon/mem.c b/board/apollon/mem.c new file mode 100644 index 0000000..c0edca5 --- /dev/null +++ b/board/apollon/mem.c @@ -0,0 +1,235 @@ +/* + * (C) Copyright 2005-2007 + * Samsung Electronics, + * Kyungmin Park kyungmin.park@samsung.com + * + * Derived from omap2420 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/omap2420.h> +#include <asm/io.h> +#include <asm/arch/bits.h> +#include <asm/arch/mux.h> +#include <asm/arch/mem.h> +#include <asm/arch/clocks.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/sys_info.h> + +#include "mem.h" + +/************************************************************ + * sdelay() - simple spin loop. Will be constant time as + * its generally used in 12MHz bypass conditions only. This + * is necessary until timers are accessible. + * + * not inline to increase chances its in cache when called + *************************************************************/ +void sdelay(unsigned long loops) +{ + __asm__("1:\n" "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0"(loops)); +} + +/******************************************************************** + * prcm_init() - inits clocks for PRCM as defined in clocks.h + * (config II default). + * -- called from SRAM, or Flash (using temp SRAM stack). + ********************************************************************/ +void prcm_init(void) { } + +/************************************************************************** + * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow + * command line mem=xyz use all memory with out discontigious support + * compiled in. Could do it at the ATAG, but there really is two banks... + * Called as part of 2nd phase DDR init. + **************************************************************************/ +void make_cs1_contiguous(void) +{ + u32 size, a_add_low, a_add_high; + + size = get_sdr_cs_size(SDRC_CS0_OSET); + size /= SZ_32M; /* find size to offset CS1 */ + a_add_high = (size & 3) << 8; /* set up low field */ + a_add_low = (size & 0x3C) >> 2; /* set up high field */ + __raw_writel((a_add_high | a_add_low), SDRC_CS_CFG); + +} + +/******************************************************** + * mem_ok() - test used to see if timings are correct + * for a part. Helps in gussing which part + * we are currently using. + *******************************************************/ +u32 mem_ok(void) +{ + u32 val1, val2; + u32 pattern = 0x12345678; + + /* clear pos A */ + __raw_writel(0x0, OMAP2420_SDRC_CS0 + 0x400); + /* pattern to pos B */ + __raw_writel(pattern, OMAP2420_SDRC_CS0); + /* remove pattern off the bus */ + __raw_writel(0x0, OMAP2420_SDRC_CS0 + 4); + /* get pos A value */ + val1 = __raw_readl(OMAP2420_SDRC_CS0 + 0x400); + val2 = __raw_readl(OMAP2420_SDRC_CS0); /* get val2 */ + + /* see if pos A value changed */ + if ((val1 != 0) || (val2 != pattern)) + return (0); + else + return (1); +} + +/******************************************************** + * sdrc_init() - init the sdrc chip selects CS0 and CS1 + * - early init routines, called from flash or + * SRAM. + *******************************************************/ +void sdrc_init(void) +{ +#define EARLY_INIT 1 + /* only init up first bank here */ + do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT); +} + +/************************************************************************* + * do_sdrc_init(): initialize the SDRAM for use. + * -called from low level code with stack only. + * -code sets up SDRAM timing and muxing for 2422 or 2420. + * -optimal settings can be placed here, or redone after i2c + * inspection of board info + * + * This is a bit ugly, but should handle all memory moduels + * used with the APOLLON. The first time though this code from s_init() + * we configure the first chip select. Later on we come back and + * will configure the 2nd chip select if it exists. + * + **************************************************************************/ +void do_sdrc_init(u32 offset, u32 early) +{ +} + +/***************************************************** + * gpmc_init(): init gpmc bus + * Init GPMC for x16, MuxMode (SDRAM in x32). + * This code can only be executed from SRAM or SDRAM. + *****************************************************/ +void gpmc_init(void) +{ + u32 mux = 0, mtype, mwidth, rev, tval; + + rev = get_cpu_rev(); + if (rev == CPU_2420_2422_ES1) + tval = 1; + else + tval = 0; /* disable bit switched meaning */ + + /* global settings */ + __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ + __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ + __raw_writel(tval, GPMC_TIMEOUT_CONTROL); /* timeout disable */ +#ifdef CFG_NAND_BOOT + /* set nWP, disable limited addr */ + __raw_writel(0x001, GPMC_CONFIG); +#else + /* set nWP, disable limited addr */ + __raw_writel(0x111, GPMC_CONFIG); +#endif + + /* discover bus connection from sysboot */ + if (is_gpmc_muxed() == GPMC_MUXED) + mux = BIT9; + mtype = get_gpmc0_type(); + mwidth = get_gpmc0_width(); + + /* setup cs0 */ + __raw_writel(0x0, GPMC_CONFIG7_0); /* disable current map */ + sdelay(1000); + +#ifdef CFG_NOR_BOOT + __raw_writel(APOLLON_24XX_GPMC_CONFIG1_3, GPMC_CONFIG1_0); + __raw_writel(APOLLON_24XX_GPMC_CONFIG2_3, GPMC_CONFIG2_0); + __raw_writel(APOLLON_24XX_GPMC_CONFIG3_3, GPMC_CONFIG3_0); + __raw_writel(APOLLON_24XX_GPMC_CONFIG4_3, GPMC_CONFIG4_0); + __raw_writel(APOLLON_24XX_GPMC_CONFIG5_3, GPMC_CONFIG5_0); + __raw_writel(APOLLON_24XX_GPMC_CONFIG6_3, GPMC_CONFIG6_0); + __raw_writel(APOLLON_24XX_GPMC_CONFIG7_3, GPMC_CONFIG7_0); +#else + __raw_writel(APOLLON_24XX_GPMC_CONFIG1_0 | mux | mtype | mwidth, + GPMC_CONFIG1_0); + __raw_writel(APOLLON_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0); + __raw_writel(APOLLON_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0); + __raw_writel(APOLLON_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0); + __raw_writel(APOLLON_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0); + __raw_writel(APOLLON_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_0); + __raw_writel(APOLLON_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0); +#endif + sdelay(2000); + + /* setup cs1 */ + __raw_writel(0, GPMC_CONFIG7_1); /* disable any mapping */ + sdelay(1000); + + __raw_writel(APOLLON_24XX_GPMC_CONFIG1_1, GPMC_CONFIG1_1); + __raw_writel(APOLLON_24XX_GPMC_CONFIG2_1, GPMC_CONFIG2_1); + __raw_writel(APOLLON_24XX_GPMC_CONFIG3_1, GPMC_CONFIG3_1); + __raw_writel(APOLLON_24XX_GPMC_CONFIG4_1, GPMC_CONFIG4_1); + __raw_writel(APOLLON_24XX_GPMC_CONFIG5_1, GPMC_CONFIG5_1); + __raw_writel(APOLLON_24XX_GPMC_CONFIG6_1, GPMC_CONFIG6_1); + __raw_writel(APOLLON_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); + sdelay(2000); + + /* setup cs2 */ + __raw_writel(APOLLON_24XX_GPMC_CONFIG1_0 | mux | mtype | mwidth, + GPMC_CONFIG1_2); + /* It's same as cs 0 */ + __raw_writel(APOLLON_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_2); + __raw_writel(APOLLON_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_2); + __raw_writel(APOLLON_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_2); + __raw_writel(APOLLON_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_2); + __raw_writel(APOLLON_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_2); +#ifdef CFG_NOR_BOOT + __raw_writel(APOLLON_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_2); +#else + __raw_writel(APOLLON_24XX_GPMC_CONFIG7_2, GPMC_CONFIG7_2); +#endif + +#ifndef CFG_NOR_BOOT + /* setup cs3 */ + __raw_writel(0, GPMC_CONFIG7_3); /* disable any mapping */ + sdelay(1000); + + __raw_writel(APOLLON_24XX_GPMC_CONFIG1_3, GPMC_CONFIG1_3); + __raw_writel(APOLLON_24XX_GPMC_CONFIG2_3, GPMC_CONFIG2_3); + __raw_writel(APOLLON_24XX_GPMC_CONFIG3_3, GPMC_CONFIG3_3); + __raw_writel(APOLLON_24XX_GPMC_CONFIG4_3, GPMC_CONFIG4_3); + __raw_writel(APOLLON_24XX_GPMC_CONFIG5_3, GPMC_CONFIG5_3); + __raw_writel(APOLLON_24XX_GPMC_CONFIG6_3, GPMC_CONFIG6_3); + __raw_writel(APOLLON_24XX_GPMC_CONFIG7_3, GPMC_CONFIG7_3); +#endif + +#ifndef ASYNC_NOR + __raw_writew(0xaa, (APOLLON_CS3_BASE + 0xaaa)); + __raw_writew(0x55, (APOLLON_CS3_BASE + 0x554)); + __raw_writew(0xc0, (APOLLON_CS3_BASE | SYNC_NOR_VALUE)); +#endif + sdelay(2000); +} diff --git a/board/apollon/mem.h b/board/apollon/mem.h new file mode 100644 index 0000000..5bc96fa --- /dev/null +++ b/board/apollon/mem.h @@ -0,0 +1,170 @@ +/* + * (C) Copyright 2005-2007 + * Samsung Electronics, + * Kyungmin Park kyungmin.park@samsung.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _APOLLON_OMAP24XX_MEM_H_ +#define _APOLLON_OMAP24XX_MEM_H_ + +/* Slower full frequency range default timings for x32 operation*/ +#define APOLLON_2420_SDRC_SHARING 0x00000100 +#define APOLLON_2420_SDRC_MDCFG_0_DDR 0x00d04011 +#define APOLLON_2420_SDRC_MR_0_DDR 0x00000032 + +/* optimized timings good for current shipping parts */ +#define APOLLON_242X_SDRC_ACTIM_CTRLA_0_100MHz 0x4A59B485 +#define APOLLON_242X_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000C + +#define APOLLON_242X_SDRC_ACTIM_CTRLA_0_166MHz 0x7BA35907 +#define APOLLON_242X_SDRC_ACTIM_CTRLB_0_166MHz 0x00000013 + +#define APOLLON_242X_SDRC_RFR_CTRL_100MHz 0x00030001 +#define APOLLON_242X_SDRC_RFR_CTRL_166MHz 0x00044C01 + +#define APOLLON_242x_SDRC_DLLAB_CTRL_100MHz 0x00007306 +#define APOLLON_242x_SDRC_DLLAB_CTRL_166MHz 0x00000506 + +#ifdef PRCM_CONFIG_I +#define APOLLON_2420_SDRC_ACTIM_CTRLA_0 APOLLON_242X_SDRC_ACTIM_CTRLA_0_166MHz +#define APOLLON_2420_SDRC_ACTIM_CTRLB_0 APOLLON_242X_SDRC_ACTIM_CTRLB_0_166MHz +#define APOLLON_2420_SDRC_RFR_CTRL APOLLON_242X_SDRC_RFR_CTRL_166MHz +#define APOLLON_2420_SDRC_DLLAB_CTRL APOLLON_242x_SDRC_DLLAB_CTRL_166MHz +#elif PRCM_CONFIG_II +#define APOLLON_2420_SDRC_ACTIM_CTRLA_0 APOLLON_242X_SDRC_ACTIM_CTRLA_0_100MHz +#define APOLLON_2420_SDRC_ACTIM_CTRLB_0 APOLLON_242X_SDRC_ACTIM_CTRLB_0_100MHz +#define APOLLON_2420_SDRC_RFR_CTRL APOLLON_242X_SDRC_RFR_CTRL_100MHz +#define APOLLON_2420_SDRC_DLLAB_CTRL APOLLON_242x_SDRC_DLLAB_CTRL_100MHz +#endif + +/* GPMC settings */ +#ifdef PRCM_CONFIG_I /* L3 at 165MHz */ +/* CS0: OneNAND */ +# define APOLLON_24XX_GPMC_CONFIG1_0 0x00000001 +# define APOLLON_24XX_GPMC_CONFIG2_0 0x000c1000 +# define APOLLON_24XX_GPMC_CONFIG3_0 0x00030400 +# define APOLLON_24XX_GPMC_CONFIG4_0 0x0b841006 +# define APOLLON_24XX_GPMC_CONFIG5_0 0x020f0c11 +# define APOLLON_24XX_GPMC_CONFIG6_0 0x00000000 +# define APOLLON_24XX_GPMC_CONFIG7_0 (0x00000e40|(APOLLON_CS0_BASE >> 24)) + +/* CS1: Ethernet */ +# define APOLLON_24XX_GPMC_CONFIG1_1 0x00011200 +# define APOLLON_24XX_GPMC_CONFIG2_1 0x001F1F01 +# define APOLLON_24XX_GPMC_CONFIG3_1 0x00080803 +# define APOLLON_24XX_GPMC_CONFIG4_1 0x1C0b1C0a +# define APOLLON_24XX_GPMC_CONFIG5_1 0x041F1F1F +# define APOLLON_24XX_GPMC_CONFIG6_1 0x000004C4 +# define APOLLON_24XX_GPMC_CONFIG7_1 (0x00000F40|(APOLLON_CS1_BASE >> 24)) + +/* CS2: OneNAND */ +/* It's same as CS0 */ +# define APOLLON_24XX_GPMC_CONFIG7_2 (0x00000e40|(APOLLON_CS2_BASE >> 24)) + +/* CS3: NOR */ +#ifdef ASYNC_NOR +# define APOLLON_24XX_GPMC_CONFIG1_3 0x00021201 +# define APOLLON_24XX_GPMC_CONFIG2_3 0x00121601 +# define APOLLON_24XX_GPMC_CONFIG3_3 0x00040401 +# define APOLLON_24XX_GPMC_CONFIG4_3 0x12061605 +# define APOLLON_24XX_GPMC_CONFIG5_3 0x01151317 +#else +# define SYNC_NOR_VALUE 0x24aaa +# define APOLLON_24XX_GPMC_CONFIG1_3 0xe5011211 +# define APOLLON_24XX_GPMC_CONFIG2_3 0x00090b01 +# define APOLLON_24XX_GPMC_CONFIG3_3 0x00020201 +# define APOLLON_24XX_GPMC_CONFIG4_3 0x09030b03 +# define APOLLON_24XX_GPMC_CONFIG5_3 0x010a0a0c +#endif /* ASYNC_NOR */ +# define APOLLON_24XX_GPMC_CONFIG6_3 0x00000000 +# define APOLLON_24XX_GPMC_CONFIG7_3 (0x00000e40|(APOLLON_CS3_BASE >> 24)) +#endif /* endif PRCM_CONFIG_I */ + +#ifdef PRCM_CONFIG_II /* L3 at 100MHz */ +/* CS0: OneNAND */ +# define APOLLON_24XX_GPMC_CONFIG1_0 0x00000001 +# define APOLLON_24XX_GPMC_CONFIG2_0 0x00081080 +# define APOLLON_24XX_GPMC_CONFIG3_0 0x00030300 +# define APOLLON_24XX_GPMC_CONFIG4_0 0x08041004 +# define APOLLON_24XX_GPMC_CONFIG5_0 0x020b0910 +# define APOLLON_24XX_GPMC_CONFIG6_0 0x00000000 +# define APOLLON_24XX_GPMC_CONFIG7_0 (0x00000C40|(APOLLON_CS0_BASE >> 24)) + +/* CS1: ethernet */ +# define APOLLON_24XX_GPMC_CONFIG1_1 0x00401203 +# define APOLLON_24XX_GPMC_CONFIG2_1 0x001F1F01 +# define APOLLON_24XX_GPMC_CONFIG3_1 0x00080803 +# define APOLLON_24XX_GPMC_CONFIG4_1 0x1C091C09 +# define APOLLON_24XX_GPMC_CONFIG5_1 0x041F1F1F +# define APOLLON_24XX_GPMC_CONFIG6_1 0x000004C4 +# define APOLLON_24XX_GPMC_CONFIG7_1 (0x00000F40|(APOLLON_CS1_BASE >> 24)) + +/* CS2: OneNAND */ +/* It's same as CS0 */ +# define APOLLON_24XX_GPMC_CONFIG7_2 (0x00000e40|(APOLLON_CS2_BASE >> 24)) + +/* CS3: NOR */ +#define ASYNC_NOR +#ifdef ASYNC_NOR +# define APOLLON_24XX_GPMC_CONFIG1_3 0x00021201 +# define APOLLON_24XX_GPMC_CONFIG2_3 0x00121601 +# define APOLLON_24XX_GPMC_CONFIG3_3 0x00040401 +# define APOLLON_24XX_GPMC_CONFIG4_3 0x12061605 +# define APOLLON_24XX_GPMC_CONFIG5_3 0x01151317 +#else +# define SYNC_NOR_VALUE 0x24aaa +# define APOLLON_24XX_GPMC_CONFIG1_3 0xe1001202 +# define APOLLON_24XX_GPMC_CONFIG2_3 0x00151501 +# define APOLLON_24XX_GPMC_CONFIG3_3 0x00050501 +# define APOLLON_24XX_GPMC_CONFIG4_3 0x0e070e07 +# define APOLLON_24XX_GPMC_CONFIG5_3 0x01131F1F +#endif /* ASYNC_NOR */ +# define APOLLON_24XX_GPMC_CONFIG6_3 0x00000000 +# define APOLLON_24XX_GPMC_CONFIG7_3 (0x00000C40|(APOLLON_CS3_BASE >> 24)) +#endif /* endif PRCM_CONFIG_II */ + +#ifdef PRCM_CONFIG_III /* L3 at 133MHz */ +# ifdef CFG_NAND_BOOT +# define APOLLON_24XX_GPMC_CONFIG1_0 0x0 +# define APOLLON_24XX_GPMC_CONFIG2_0 0x00141400 +# define APOLLON_24XX_GPMC_CONFIG3_0 0x00141400 +# define APOLLON_24XX_GPMC_CONFIG4_0 0x0F010F01 +# define APOLLON_24XX_GPMC_CONFIG5_0 0x010C1414 +# define APOLLON_24XX_GPMC_CONFIG6_0 0x00000A80 +# else /* NOR boot */ +# define APOLLON_24XX_GPMC_CONFIG1_0 0x3 +# define APOLLON_24XX_GPMC_CONFIG2_0 0x00151501 +# define APOLLON_24XX_GPMC_CONFIG3_0 0x00060602 +# define APOLLON_24XX_GPMC_CONFIG4_0 0x10081008 +# define APOLLON_24XX_GPMC_CONFIG5_0 0x01131F1F +# define APOLLON_24XX_GPMC_CONFIG6_0 0x000004c4 +# endif /* endif CFG_NAND_BOOT */ +# define APOLLON_24XX_GPMC_CONFIG7_0 (0x00000C40|(APOLLON_CS0_BASE >> 24)) +# define APOLLON_24XX_GPMC_CONFIG1_1 0x00011000 +# define APOLLON_24XX_GPMC_CONFIG2_1 0x001f1f01 +# define APOLLON_24XX_GPMC_CONFIG3_1 0x00080803 +# define APOLLON_24XX_GPMC_CONFIG4_1 0x1C091C09 +# define APOLLON_24XX_GPMC_CONFIG5_1 0x041f1F1F +# define APOLLON_24XX_GPMC_CONFIG6_1 0x000004C4 +# define APOLLON_24XX_GPMC_CONFIG7_1 (0x00000F40|(APOLLON_CS1_BASE >> 24)) +#endif /* endif CFG_PRCM_III */ + +#endif /* endif _APOLLON_OMAP24XX_MEM_H_ */ diff --git a/include/asm-arm/arch-arm1136/mux.h b/include/asm-arm/arch-arm1136/mux.h index 67c8419..4fdb9c6 100644 --- a/include/asm-arm/arch-arm1136/mux.h +++ b/include/asm-arm/arch-arm1136/mux.h @@ -28,6 +28,7 @@ typedef unsigned int uint32; void muxSetupSDRC(void); void muxSetupGPMC(void); void muxSetupUsb0(void); +void muxSetupUsbHost(void); void muxSetupUart3(void); void muxSetupI2C1(void); void muxSetupUART1(void); @@ -53,6 +54,10 @@ void muxSetupHDQ(void); #define CONTROL_PADCONF_GPMC_NCS0_BYTE1 ((volatile unsigned char *)0x4800008D) #define CONTROL_PADCONF_GPMC_NCS0_BYTE2 ((volatile unsigned char *)0x4800008E) #define CONTROL_PADCONF_GPMC_NCS0_BYTE3 ((volatile unsigned char *)0x4800008F) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE4 (0x48000090) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE5 (0x48000091) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE6 (0x48000092) +#define CONTROL_PADCONF_GPMC_NCS0_BYTE7 (0x48000093)
/* Pin Muxing registers used for SDRC */ #define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0) @@ -70,6 +75,7 @@ void muxSetupHDQ(void); #define CONTROL_PADCONF_SPI1_SIMO ((volatile unsigned char *)0x48000100) #define CONTROL_PADCONF_SPI1_SOMI ((volatile unsigned char *)0x48000101) #define CONTROL_PADCONF_SPI1_NCS0 ((volatile unsigned char *)0x48000102) +#define CONTROL_PADCONF_SPI1_NCS1 (0x48000103)
#define CONTROL_PADCONF_MCBSP1_FSR ((volatile unsigned char *)0x4800010B)
@@ -151,8 +157,20 @@ void muxSetupHDQ(void); #define CONTROL_PADCONF_USB0_SE0 ((volatile uint8 *)0x48000122) #define CONTROL_PADCONF_USB0_DAT ((volatile uint8 *)0x48000123)
+/* Pin Muxing registres used for USB1. */ +#define CONTROL_PADCONF_USB1_RCV (0x480000EB) +#define CONTROL_PADCONF_USB1_TXEN (0x480000EC) + /* Pin Muxing registers used for UART3/IRDA */ #define CONTROL_PADCONF_UART3_TX_IRTX ((volatile uint8 *)0x48000118) #define CONTROL_PADCONF_UART3_RX_IRRX ((volatile uint8 *)0x48000119)
+/* Pin Muxing registers used for GPIO */ +#define CONTROL_PADCONF_GPIO69 (0x480000ED) +#define CONTROL_PADCONF_GPIO70 (0x480000EE) +#define CONTROL_PADCONF_GPIO102 (0x48000116) +#define CONTROL_PADCONF_GPIO103 (0x48000117) +#define CONTROL_PADCONF_GPIO104 (0x48000118) +#define CONTROL_PADCONF_GPIO105 (0x48000119) + #endif diff --git a/include/asm-arm/arch-arm1136/omap2420.h b/include/asm-arm/arch-arm1136/omap2420.h index d833035..0c11bec 100644 --- a/include/asm-arm/arch-arm1136/omap2420.h +++ b/include/asm-arm/arch-arm1136/omap2420.h @@ -77,6 +77,20 @@ #define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0) #define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4) #define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8) +#define GPMC_CONFIG1_2 (OMAP2420_GPMC_BASE+0xC0) +#define GPMC_CONFIG2_2 (OMAP2420_GPMC_BASE+0xC4) +#define GPMC_CONFIG3_2 (OMAP2420_GPMC_BASE+0xC8) +#define GPMC_CONFIG4_2 (OMAP2420_GPMC_BASE+0xCC) +#define GPMC_CONFIG5_2 (OMAP2420_GPMC_BASE+0xD0) +#define GPMC_CONFIG6_2 (OMAP2420_GPMC_BASE+0xD4) +#define GPMC_CONFIG7_2 (OMAP2420_GPMC_BASE+0xD8) +#define GPMC_CONFIG1_3 (OMAP2420_GPMC_BASE+0xF0) +#define GPMC_CONFIG2_3 (OMAP2420_GPMC_BASE+0xF4) +#define GPMC_CONFIG3_3 (OMAP2420_GPMC_BASE+0xF8) +#define GPMC_CONFIG4_3 (OMAP2420_GPMC_BASE+0xFC) +#define GPMC_CONFIG5_3 (OMAP2420_GPMC_BASE+0x100) +#define GPMC_CONFIG6_3 (OMAP2420_GPMC_BASE+0x104) +#define GPMC_CONFIG7_3 (OMAP2420_GPMC_BASE+0x108)
/* SMS */ #define OMAP2420_SMS_BASE 0x68008000 @@ -209,13 +223,24 @@ #define SRAM_OFFSET2 0x0000F800 #define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)
-#define LOW_LEVEL_SRAM_STACK 0x4020FFFC - -#define PERIFERAL_PORT_BASE 0x480FE003 - /* FPGA on Debug board.*/ #define ETH_CONTROL_REG (H4_CS1_BASE+0x30b) #define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c) #endif /* endif CONFIG_2420H4 */
+#if defined(CONFIG_APOLLON) +#define APOLLON_CS0_BASE 0x00000000 /* OneNAND */ +#define APOLLON_CS1_BASE 0x08000000 /* ethernet */ +#define APOLLON_CS2_BASE 0x10000000 /* OneNAND */ +#define APOLLON_CS3_BASE 0x18000000 /* NOR */ + +#define ETH_CONTROL_REG (APOLLON_CS1_BASE + 0x30b) +#define LAN_RESET_REGISTER (APOLLON_CS1_BASE + 0x1c) +#endif /* endif CONFIG_APOLLON */ + +/* Common */ +#define LOW_LEVEL_SRAM_STACK 0x4020FFFC + +#define PERIFERAL_PORT_BASE 0x480FE003 + #endif diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h index f6a5b4f..ab19047 100644 --- a/include/asm-arm/mach-types.h +++ b/include/asm-arm/mach-types.h @@ -737,6 +737,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_CB3RUFC 726 #define MACH_TYPE_MP2USB 727 #define MACH_TYPE_AT91SAM9261EK 848 +#define MACH_TYPE_OMAP_APOLLON 919 #define MACH_TYPE_PDNB3 1002 #define MACH_TYPE_AT91SAM9260EK 1099 #define MACH_TYPE_AT91RM9200DF 1119 @@ -6826,6 +6827,18 @@ extern unsigned int __machine_arch_type; # define machine_is_omap_h4() (0) #endif
+#ifdef CONFIG_MACH_OMAP_APOLLON +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OMAP_APOLLON +# endif +# define machine_is_omap_apollon() (machine_arch_type == MACH_TYPE_OMAP_APOLLON) +#else +# define machine_is_omap_apollon() (0) +#endif + #ifdef CONFIG_MACH_N10 # ifdef machine_arch_type # undef machine_arch_type diff --git a/include/configs/apollon.h b/include/configs/apollon.h new file mode 100644 index 0000000..49fd234 --- /dev/null +++ b/include/configs/apollon.h @@ -0,0 +1,250 @@ +/* + * (C) Copyright 2005-2007 + * Samsung Electronics, + * Kyungmin Park kyungmin.park@samsung.com + * + * Configuration settings for the 2420 Samsung Apollon board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP2420 1 /* which is in a 2420 */ +#define CONFIG_OMAP2420_APOLLON 1 +#define CONFIG_APOLLON 1 +#define CONFIG_APOLLON_PLUS 1 /* If you have apollon plus 1.x */ + +/* Clock config to target*/ +#define PRCM_CONFIG_I 1 +/* #define PRCM_CONFIG_II 1 */ + +/* Boot method */ +/* uncomment if you use NOR boot */ +/* #define CFG_NOR_BOOT 1 */ + +/* uncommnet if you use NOR on CS3 */ +/* #define CFG_USE_NOR 1 */ + +#ifdef CFG_NOR_BOOT +#undef CFG_USE_NOR +#define CFG_USE_NOR 1 +#endif + +#include <asm/arch/omap2420.h> /* get chip and board defs */ + +#define V_SCLK 12000000 + +/* input clock of PLL */ +/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ +#define CONFIG_SYS_CLK_FREQ V_SCLK + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +/* Total Size of Environment Sector */ +#define CFG_ENV_SIZE SZ_128K +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + SZ_128K) +/* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_SIZE 128 + +/* + * Hardware drivers + */ + +/* + * SMC91c96 Etherent + */ +#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96_BASE (APOLLON_CS1_BASE+0x300) +#define CONFIG_LAN91C96_EXT_PHY + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ + +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ +#define CFG_NS16550_COM1 OMAP2420_UART1 + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* UART1 on H4 */ + + /* + * I2C configuration + */ +#define CONFIG_HARD_I2C +#define CFG_I2C_SPEED 100000 +#define CFG_I2C_SLAVE 1 +#define CONFIG_DRIVER_OMAP24XX_I2C + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ONENAND + +#undef CONFIG_CMD_AUTOSCRIPT + +#ifndef CFG_USE_NOR +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#endif + +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +#define CONFIG_BOOTDELAY 1 + +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.116.25 +#define CONFIG_SERVERIP 192.168.116.1 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_ETHADDR 00:0E:99:00:24:20 +#ifdef CONFIG_APOLLON_PLUS +#define CONFIG_MEMSIZE "64M" +#else +#define CONFIG_MEMSIZE "128M" +#endif + +#define CONFIG_BOOTARGS "root=/dev/nfs rw" \ + " mem=" CONFIG_MEMSIZE " console=ttyS0,115200n8" \ + " ip=192.168.116.25:192.168.116.1::255.255.255.0:" \ + "apollon:eth0:off nfsroot=/tftpboot/nfsroot" \ + " profile=2" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "Image=tftp 0x80008000 Image; go 0x80008000\0" \ + "zImage=tftp 0x80180000 zImage; go 0x80180000\0" \ + "uImage=tftp 0x80180000 uImage; bootm 0x80180000\0" \ + "uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0" \ + "xloader=tftp 0x80180000 x-load.bin;" \ + "cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0" \ + "syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0" \ + "syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0" \ + "norboot=cp32 0x18040000 0x80008000 0x200000; " \ + "go 0x80008000\0" \ + "oneboot=onenand read 0x80008000 0x40000 0x200000; " \ + "go 0x80008000\0" \ + "onesyncboot=run syncmode oneboot\0" \ + "rootpath=/tftpboot/nfsroot\0" \ + "bootcmd=run uboot\0" + +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "Apollon # " + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT V_PROMPT +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */ +#define CFG_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */ + +/* The 2420 has 12 GP timers, + * they can be driven by the SysClk (12/13/19.2) or by + * 32KHz clk, or from external sig. This rate is divided by a local divisor. + */ +#define V_PVT 7 /* use with 12MHz/128 */ + +#define CFG_TIMERBASE OMAP2420_GPT2 +#define CFG_PVT V_PVT /* 2^(pvt+1) */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +/* CS1 may or may not be populated */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_128M +#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#ifdef CFG_USE_NOR +/* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */ +#define CFG_FLASH_BASE 0x18000000 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 1024 +/*----------------------------------------------------------------------- + + * CFI FLASH driver setup + */ +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ + +#else /* !CFG_USE_NOR */ + +#define CFG_NO_FLASH 1 +#endif /* CFG_USE_NOR */ + +/* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */ +#define CFG_ONENAND_BASE 0x00000000 +#define CFG_ENV_IS_IN_ONENAND 1 +#define CFG_ENV_ADDR 0x00020000 + +#endif /* __CONFIG_H */