AHB address can be as long as 32 bit, hence remove the CQSPI_REG_INDIRECTRDSTARTADDR mask. Since AHB address is passed from DT and read as u32 value, it anyway does not make sense to mask upper bits.
Signed-off-by: Vignesh R vigneshr@ti.com Tested-by: Marek Vasut marex@denx.de Acked-by: Marek Vasut marex@denx.de Reviewed-by: Jagan Teki jteki@openedev.com --- drivers/spi/cadence_qspi_apb.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c index a71531d30935..a8cc23f0b6e8 100644 --- a/drivers/spi/cadence_qspi_apb.c +++ b/drivers/spi/cadence_qspi_apb.c @@ -45,7 +45,6 @@ #define CQSPI_INST_TYPE_QUAD (2)
#define CQSPI_STIG_DATA_LEN_MAX (8) -#define CQSPI_INDIRECTTRIGGER_ADDR_MASK (0xFFFFF)
#define CQSPI_DUMMY_CLKS_PER_BYTE (8) #define CQSPI_DUMMY_BYTES_MAX (4) @@ -573,7 +572,7 @@ int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat, addr_bytes = cmdlen - 1;
/* Setup the indirect trigger address */ - writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK), + writel((u32)plat->ahbbase, plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
/* Configure the opcode */ @@ -714,7 +713,7 @@ int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat, return -EINVAL; } /* Setup the indirect trigger address */ - writel(((u32)plat->ahbbase & CQSPI_INDIRECTTRIGGER_ADDR_MASK), + writel((u32)plat->ahbbase, plat->regbase + CQSPI_REG_INDIRECTTRIGGER);
/* Configure the opcode */