The baseboard supports and NVMe drives via the PCIe slot. This requires a few extra config options to be enabled.
The NVMe can be enumerated with the following commands:
u-boot=> pci enum PCIE-0: Link up (Gen1-x1, Bus0) u-boot=> nvme scan u-boot=> nvme info Device 0: Vendor: 0x15b7 Rev: 20120022 Prod: 184960441105 Type: Hard Disk Capacity: 122104.3 MB = 119.2 GB (250069680 x 512) u-boot=>
Signed-off-by: Adam Ford aford173@gmail.com --- Depends on: https://patchwork.ozlabs.org/project/uboot/patch/20240326202439.46707-4-afor...
diff --git a/configs/imx8mp_beacon_defconfig b/configs/imx8mp_beacon_defconfig index 0ae8c9645a..fe1678d8ae 100644 --- a/configs/imx8mp_beacon_defconfig +++ b/configs/imx8mp_beacon_defconfig @@ -15,6 +15,7 @@ CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-beacon-kit" CONFIG_SPL_TEXT_BASE=0x920000 CONFIG_TARGET_IMX8MP_BEACON=y +CONFIG_DM_RESET=y CONFIG_SYS_MONITOR_LEN=524288 CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y @@ -27,6 +28,7 @@ CONFIG_ARMV8_SET_SMPEN=y CONFIG_ARMV8_EA_EL3_FIRST=y CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 CONFIG_SYS_LOAD_ADDR=0x40480000 +CONFIG_PCI=y # CONFIG_ANDROID_BOOT_IMAGE is not set CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 @@ -65,6 +67,7 @@ CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y @@ -118,8 +121,11 @@ CONFIG_DWC_ETH_QOS_IMX=y CONFIG_FEC_MXC=y CONFIG_RGMII=y CONFIG_MII=y +CONFIG_NVME_PCI=y +CONFIG_PCIE_DW_IMX=y CONFIG_PHY=y CONFIG_PHY_IMX8MQ_USB=y +CONFIG_PHY_IMX8M_PCIE=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8M=y